Medieval & Viking Sword Scabbards

HISTORIC Weapons
3 followers
9 Video Views·Nov 6, 2024
A video discussing the construction, hanging and wearing of a variety of different sword scabbards from the Viking age to the end of the Medieval period.
Hi Tod of Tod's Stuff here talking about scabbards today.
So this is a mid-15th century longsword scabbard actually for an Albion Agincourt.
Now I make scabbards for all my own swords, for Albion swords, lots of those as well,
but basically any sword as long as I have the blade to work around. Now this one here, if we
look at the features, you've got a wooden core inside covered by leather which is by far the
most normal way of doing it. Now up the back here I have a sewn seam, sometimes they glued them,
sometimes they sewed them. I generally prefer sewing, sometimes gluing is the way to go.
A scabbard knot here, basically a way of suspending the scabbard from your belt and
there's a couple of ways you can do that, we'll talk about that in a minute. We have two risers
here which are just lumps in the leather which stop the straps moving up and down so it keeps
everything in place. This one has a bronze shape, bronze absolutely the standard type material
for shapes and for belt fittings. They did use iron and they could use iron but it wasn't so common.
Note at this point that a shape on the end of the scabbard is popular throughout history
but not always, so lower grade scabbards maybe not. 14th century they seem to like not having shapes
at all and again actually further back into the 10th century or so, shapes again not quite so
popular. Now I mentioned that this has a wooden core, now there's a couple of really important
things to note with that. First of all, whatever you do, do not have a scabbard made of a high
tannin wood like oak or chestnut because the tannin, I call it tannin, but it's tannic acid.
Acid in contact with metal will rust it, so basically if you make a wooden scabbard, an
oak scabbard and put your sword in it, two weeks later it will come out a bundle of rust, don't do
it. So low tannin woods, poplar is one, it's very tough. I know there's a lot of people who use
birch, I've never used it for scabbards but you know a lot of respected people do, so I guess
that's fine as well. I also think that it probably has very very similar properties to poplar.
Poplar has got some very particular properties that make it really suited to scabbards,
so very low tannin content, no acid content, so it doesn't rust the metal, clearly a good thing.
It's also very light, very tough and easy to work and what I mean by tough is I've got a bit of thin
poplar here, about three and a half mil, eighth of an inch and you can break it, no problem, but
do you see how it stays connected? It's tough, it wants to stay in one piece
and that makes it a really good scabbard wood, so again you can see. So although you can break it
and of course you can, it's thin, it's wood, but it does want to stay in one piece, so even if it
cracks you basically have still got a scabbard left. Now if you come onto the rest of the scabbard
here, no decoration on this particular one, decorated straps here, bit of stamped work,
a bronze distributor, so basically what happens here, there's a video on this,
another one here on Todd's Stuff, but if you put your sword in there, quite clearly the whole thing
is going to dangle about, okay, you can see it. Now if you put it onto a third point, so I'm just
going to tie that belt off and you put it onto a third point here, suddenly you end up with a
sword, nice swing of the hips there, which really wants to stay put. Now the distributor itself,
you've got to size it for you, but here it's a little bit over, but basically around about
the small of your back and you adjust all the straps to suit, but we've got that in another
video so we can talk, we can have a look at that anytime you want. Now I'll just whip this one off
and I'll go through the scabbards that I have here. Starting with this one, this is actually
set up for an Albion Gadagelt, which is a 10th century sword, I think from memory. This particular
sort of Z arrangement of the strap, of the belt harness, that seems to run really from the 9th
or 10th century all the way through to about the late 13th, early 14th, becoming less common of
course, but as a layout, it's really quite a long-lived thing. The shape here, it's bronze
again, cast bronze, particularly proud of it, it's a reproduction of the Brighthampton shape.
Brighthampton is a part of this village, so the original of this shape was found about a mile,
mile and a quarter from where I live. This one is a little earlier, it's about 8th, 9th century,
whereas the scabbard is, you know, a couple of hundred years later perhaps, but the look doesn't
change that much, so you know, slightly anachronistic, but I thought I'd go for it anyway.
Just pierce the back of the scabbard there, it just helps to stop anything moving around
sewn seam as before. This one, very often at this period, they would be lined. Now I don't
line my scabbards unless requested to, this period actually I usually do, but that one's
a stock piece, but later on I don't line them unless I'm requested to. They did do it, but
very, very seldom actually, so people say, oh if you don't line it, the wood will scratch the
steel or something, that won't. The benefit of lining is twofold, one is that you can have a
slightly loose scabbard, I'll come to this, but it still holds a sword, and also that you can
introduce grease into that lining which will just keep the sword itself oiled. This one,
Albion Arn, very famous sword obviously from the film, a bit of carved decoration at the top here,
we have two straps coming to a slightly different cross-linked piece, another one here and then two
sets of the thonging crossing around. This type of scabbard, it's almost like the industry standard
for scabbard makers of medieval reproductions now, you don't have to follow it slavishly,
sometimes there's two straps, sometimes one, sometimes across two, you know they did all sorts
of things, they didn't come out of a mould, so just as long as you end up with a scabbard that
looks kind of something like this, it'll kind of be right. Bronze horse shoe shape, a sewn back,
and this one again, there's another video of this type, it's what I call a French tie,
I'm sure it's got 58 different names to it, but essentially get it sat on your hip nicely,
just a loop on the bottom one, goes around on the top one, just pull through, pull it tight.
Now what you end up with is, as you can see from me pulling it, it doesn't want to come undone,
it sits nicely, sits on the hip well, stays close to me, doesn't swing about, which is that's what's
really important, you don't want the thing swinging about. You want to undo it, just pull it and it's
done. Now I talked earlier a little bit about the lining, now the thing is, if you make a scabbard
and it's really tight to the sword, feels beautiful, goes in, oh look at that, oh lovely,
isn't that wonderful, goes in lovely, look doesn't come out, give it a little tug and now it comes,
perfect one might think, but don't forget wood swells when it gets wet, so after a day or two
days of campaign, this scabbard is going to be holding that sword real tight. Now the modern
market wants these scabbards to be beautifully fitted like this, I actually, and I do it,
that's what I do, but I actually don't think that that's the way it was really done because
like I say, you're caught in a rainstorm for a day or two, you're not going to get your sword out.
Now, but you know, it comes down to you. Again it's Albion Burgundian, another Albion sword,
mid to late 15th century. Now this one here, it's got some stamp decoration on this panel here
between the straps. At earlier periods, occasionally you would end up with decoration
all over your scabbard. This kind of period, I suppose late 14th, 15th century, even into the
16th, they tended to decorate perhaps this section of the scabbard, but not the whole thing on the
whole, so there's just a little fairly subtle decoration there. You have the scabbard knots
here, they're done in a very particular way that holds it, they look pretty and they work well,
and I'll just film a little bit of that later, and then again bronze belt fittings here,
much the same as the Agincourt scabbard earlier on. These particular fittings are done so they
are permanently connected to the belt, you cannot undo them. I also supply, all of these are
available through Todd's Foundry or Todd's Stuff, just drop me an email if you're interested in the
all the sword belt fittings, but have a look on the site first, they're all there.
This sword belt is slightly different, this is a long sword by myself, this one is now detachable,
so you can separate the belt and the sword itself, it just unclips, but the setup of these is all the
same for the Agincourt and the Burgundian and for this one indeed. The setup is the same,
that you get the distributor over the small of your back, belt comes through, obviously get it
the right kind of height, and then it comes like this. Now I haven't punched any holes in this yet,
but so what you've got is a scabbard that sits there, the sword doesn't waver around too much,
it's kept close to you, it's what you really want because in that way it doesn't tangle with your
legs and so on, so it's basically a better way of wearing it, less distracting too,
but if we take this one off, the other principal difference here obviously is that we have metal
fabricated fittings. These ones are again obviously done by myself, very heavy ribbed decoration,
very typically Germanic, but otherwise this is the same kind of system as the scabbard knots.
This setup with the metal bracket seems to come in as far as I can tell around about the mid-14th
century, perhaps a little bit earlier, and then finally this one is slightly different,
a circa late 15th century messer, also by myself, bronze shape sewn up the back. So what's notable
about this scabbard here, it's for a messer that I've done myself, is we have two points,
two pickup points here that are very close together in terms of height. The earlier strap
scabbards where you have a difference in height between the two sides of the belt,
they actually wear quite well. Any sword that has two points like this or god forbid two points on
top, which actually Europeans didn't seem to do, but they did seem to favour that in some Islamic
countries. The sword is just flying everywhere, it's a horrible way to wear it. This one is not
quite wonderful, but it's not quite horrible either. So what you've got going on here
is two points which are almost on the same level, so you'd think that it swings around a lot,
and if it was a long sword, and actually 14th century, they had long swords on two points like
that, but if this was a long sword it would swing about, but because it's short and it's a messer,
it's pulled quite close to you, so it's fine. But the thing to note as well here is that because
it's a messer, you've got a wide peak here, and that means that the whole scabbard needs to be
parallel all the way up. What that means is the scabbard is wider at this point than the blade,
and you inevitably get this rattle and looseness. There's nothing you can do about it, it's just
the way they're set up. So we'll just have a look at some close-up scabbard details, but
that'll be the end of my beautiful face, but thank you very much, I hope it's been interesting.
