HOW TO PUT INTUITION LINERS ON A THE SEBA WIZARD SETUP

Hi YouTube, my name is Ricardo Lino and I'm a wheel addict. You know this guy? When last did I see you guys? So I came to the shop because I want to gut these things. Basically these are the same as CJ. I want to take the liner out of this and put these ones on. But I wouldn't do this without showing you guys what I'm going to be doing because I know some people also want to do it and they have their doubts. I've never done it to some SEMA skates. I've done it like two weeks ago to some USD carbons. It was okay but let's see how this one goes. Okay, so first thing is obviously you need to take the frames away, the sole plates, the laces. You're going to want the skate as naked as possible. So that's the first thing we're going to do. Okay, they're fully naked. I'm going to try to keep this part all the way to the top even if I don't think I need it because the cuff would cover it. But I just want it because it looks clean. So I'm going to try to make a cut here and just take the foams from the inside. Obviously one of the first things that come out is this. Something that you should know is that one of the main reasons why I'm doing these is because the foams on these skates they're soft and thick. Obviously with time I would get more space inside the skate but I'd rather have slimmer and thicker foams. So that's why I want to put the intuition liner and I think that's one of the main reasons why people do it. First, these ones go out. Check, this is really thick. Now here you can also see it. It's actually, it has a good heel lock. You can see that this part is for your heel to go in and then it gets stuck there. That's amazing but it's just thick. That's what it is. So now I'm going to try to make a cut around here. I'm not sure if this is going to work. Try it. And yes, I paid for the skates. Not the full amount. Main part is this. So like I said I was going to make that cut. I don't know if this is how people usually do it. I'm trying to get this thing from my own idea of what should be coming out. So as you can see here it's going to start becoming a bit messy now. I feel like I could now just pull the whole thing and keep it there. I'm going to try to keep the sole even if it's possible to just rip it if I want. The thing is a carbon skate usually doesn't give you a lot of room to play with it. If this would be a plastic skate I could just open the shell a lot easier. Carbon is usually not as playful if that makes sense. It doesn't let you open that much. Okay so this is what I wanted to do. See I cut the whole heel area. I made a cut here. Now I'm going to try to dig through these foams here and keep this shape. Basically I'm going to try to make it. I don't know if it's possible. I would love it to look as clean as possible. Maybe I can do it. I'll try to take one of the layers so I can actually now start seeing what I'm doing. I'm basically taking all the foams. So basically there was two thickness of foam. There was like the soft foam which was right here in contact with my skin right underneath this surface and then under this there was like some darker foam. I took basically both and now this is just the hard part. I'm gonna try to take all these foams from here. This should give me a lot more space. I think here on the side I might be able to go a bit more like forward. Cut a little bit longer and then I can still take this foam here giving me a little bit more space for the liner. Again I wish I had the right tools but as I don't. Try with it. Cut also a bit longer. More space here. I'll do the exact same on the other side. Here there's still a little bit of foam which I don't think is going to be problematic but I can actually just get it. I was really close to this neoprene. There's a piece of neoprene here and basically nothing is here now. That was really close. There's a piece of rubber here. If I need space I can still go and dig a little bit more. You know what? I think I took the biggest part of it. Now I'm even scared but let's do the test. I hope this fits because the reason why I'm taking all this stuff is because they weren't fitting my foot that good. Let's see. Now the final test. I really hope this thing fits. It doesn't seem like it. It seems like it's not gonna fit. I really hope this thing fits and these liners are becoming super stinky. A lot of people use this. It's killing me. It's way too tight in front. Let's see now. No insole now. Let's see it without the insole. I hope I gained a little bit of space. A bit better but this area is really... So I'm getting there. I just don't know what I'm gonna tight here. This whole part feels like it's a little too low. How do people skate this? I don't know if I can actually dig more. There must be a way. There might be a very very tiny bit of space. Yeah there's like a yeah I can feel it. There's like a one millimeter of foams all around. There's like a little bit of foam. I would say maybe like less than a millimeter all the way around. So I thought it would be enough. Something like really thin. I thought it would be enough to finish it here but this part still feels like it's a little bit too low. So I'm gonna try to shave that. I don't know how. I'm gonna try it. Let's see. So what I'm gonna do now is I'm gonna try to cut all the way around this part. If for some reason I can still do it. I think I can still take this sole because there was a part that I was pulling this and the sole was coming out. So that might give me still a bit of space. I don't know. My last chance. Now the sole is coming out. Yeah this might be my only chance. So I'm gonna check this. Here I'm gonna cut it and this should create a bit more space. Now the liner will be just like as if it was a hard boot. Because now see now that's the carbon boot from the inside. If this doesn't give you more space I don't know guys. I don't really know what I'm doing. I don't know what I'm doing. So this is something weird because it's kind of like um See now I created a lot more space. I can actually even take this thing which if I take it out I have so much more space that in fact I'm just gonna see. So now all I got is really carbon. So now I should have the space. There's no other way for me to get my space other than this. See I just seriously don't know. I just don't know. This just came from there. So I guess now there's really nothing on the inside. So if I don't have the space now I don't know. Carbon. There's carbon all the way there. There's no foams. No nothing. Even in the front it's just a leather. So if it doesn't fit now it's not my size. Now it's gonna fit me Jacko. I'm telling you. Check this. Like a glove. Now it fits perfect. I think I can even you know what I might even be able to do this. Let's see. I really hope I can. My goal would be to put this underneath the super fit. Come on. This would be the plan but probably now I get too much height there. This is perfect now. Now my friends I just gotta put my skate together and I'll show you the second. I need to do it to the second skate but you don't need the second. You don't need to see the second skate. So now I'm gonna finish the other one. I'm gonna put it together and I'm finally gonna put together the wizard skates or the wizard setup. I think that's how everyone calls it right? But it took me a little bit longer. I even had time to to get younger. I wait for a gear tree meanwhile. It was yesterday that you saw me getting the liner. Now I've done both skates and put the frames, wheels, straps, cuff. Everything is together. So here's the skate. It does look really really good and here you got the intuition v2 liner. The second version liner. You already saw me getting the the boot so you know that there's no foams inside. As a cuff I'm using the MT plus cuff from micro and this is a strap from an upcoming skate from micro. So I really like the detail. It just says MT here. It's all rubbery. I really like the detail on this one. That's why I'm using it all black. Then well here wizard NR100 so I'm using the 100 version of these. They also come in 110 and in 90. I do believe that this is something that goes more into what I want to do. I don't want like a shorter frame because I have other short frames. I also have other long frames and this was a wheel length that I didn't really add. So I really like it. I think it's going to be good. Then wheel wise I'm going to be using the 83a hyper concrete z1 but these wheels also come in 78 I think version and in 85. I will be trying all of them because I have enough wheels to try all of them and I'll be making videos telling you my experience with the different durometers on this setup. But for now these were the ones that I first tried and I really really enjoyed them. Bearing wise I'm going to be using the micro twin cam ilq9 pro. It's a long name so it's just ilq9 pro bearings. They're really really good. I'm not really that picky with bearings but these ones I know they work so that's what I'm going for. Now skating with these it's not going to be on this video but if you want to see me skating with these and if you want to see if they work with me because you know that these work with everyone else. I don't know if they're going to work with me but if you want to see if they work with me well subscribe to this channel. Give me some thumbs up if you like this video. If you're subscribing make sure that you press on that bell because if you press on that bell you will get a notification every time that I upload one of these. Either on the computer or on the phone there will be some sort of notification and then you can see me skating these. If you didn't like it well you can press the thumbs down button you can even press it twice if you press it twice it's even better for me. Other than that what I always say is to just not forget why we all started skating and that is because it's fun. Cheers and see you on the wizards