#tips#embroidery#stepbystep#hemstitch For my Fans! Don't know how to finish the edge of the embroidery? Just watch this video and you can hack your own products yourself. Для моїх Шанувальників! Не знаєте як обробляти край вишивки? Просто подивіться це відео і Ви самостійно виконаєте підрублення власних виробів. Я вдячна, що вас зацікавила моя робота та у мене в запасі ще є багато гарних ідей, які я маю намір показати, тож підписуйтесь і ми будемо творити прекрасні речі разом!
I am grateful that you are interested in my work, I have many more interesting ideas in store that I intend to show, so subscribe and we will create beautiful things together! Оn my channel, you will find clear step-by-step videos for all needlework lovers, which are made with hard work and passionate love for creating beauty! На моєму каналі ви знайдете зрозумілі покрокові відео для всіх любителів рукоділля, які зроблені наполегливою працею та пристрасною любов'ю до створення прекрасного!
Всі опубліковані роботи виконані мною особисто та показані в доступній формі. All published works are made by me personally and are shown in an accessible form.
Також щиро дякую всім за підписку та коментування. Also, a big thank you to everyone for subscribing and commenting.
Greetings,
dear lovers of needlework!
Today, see
one of the methods
with undercutting
the edge of the product.
I will try to show important points
that are worth paying attention to.
As a sample
, I took a small scrap
of homespun canvas #30
Kaplan silk thread
and a simple net embroidery.
According to the embroidery,
I have to pull out
these three threads
and pull out
in the direction of the corner.
You see,
I don't have enough threads for a full twig
.
Now I
pull out the threads
and I have full twigs. I am pulling out
these three threads
. Pull out
the threads
to the wrong side of the embroidery.
And on the front side,
I knit a single wire,
combining
the pulled threads
and three threads
of the main
wire.
That is, three upper threads
from the fabric
and three
lower threads
that
are pulled out.
I go over
and again continue
to knit
a single stick
across the entire embroidery of the product.
On the wrong side,
I fasten
the pulled threads
to the neighboring twig.
Now I need to pull out
three more threads,
stepping back from
the mesh with a single twig.
This is the front side of the product.
I measure the width
and cut off the excess fabric.
I bend the corner.
The lines,
I see,
should match.
Fasten the corner.
I perform hemming
and
fasten the hem with an auxiliary
thread
.
This is the front side of the product.
Now I take a thread
in the tone
of the embroidery fabric
and sew the corner.
I fasten the thread.
This is the front side,
and
here we have it,
the reverse side
of the product.
Now, from the wrong side,
I knit
a single stick
on a pulled out strip
of three threads.
On the front side of the product,
I make
a decorative seam,
joining
the upper
and lower nets.
I combine
the upper
twig.
Needle with thread
on the front side.
I combine the lower rod
and it goes
from the wrong side
to the upper left
rod.
Here is this twig,
I
divide it
into three threads.
Now
I bring the thread with the needle to
the wrong side
of the product.
I fasten the thread.
I hope
this video will give you many interesting,
creative ideas.
Oksana Blaguta
was with you .
Thank you for viewing.