Cheapest 60cm ALL IN ONE Tank Kit | BETTA SORORITY Aquascape Tutorial

Small gardens and aquaspace
198 followers
Superfish have sent us another all-in-one kit aquarium.
So this is the Superfish Start 70 Tropical Kit and it is one of the most affordable two-foot
tanks or 60 centimeter tanks that you can buy. Not only do you get a lidded tank that's a decent size
but you also get a bunch of accessories coming with it as well including a filter and a heater.
Okay I think we should get this bad boy out and have a little look what you get inside.
Well I know what you get because it's on the box. And the fish that we're going to be putting in
the tank are in here. So these are female bettas. I've had them oh year and a half I think yeah
about a year and a half now. I originally had a massive group but I slowly whittled it down and
took some back. I did have them in a massive tank and these are my favorite ones of the group. Now
some of you are going to be saying oh no look at the stress stripes. These certain fish with the
stress stripes have always had those stripes. It's their coloration and you can see the other ones
that are near them as well but they don't have those and because that's their coloration. It's
just it's just how it is. Well either that or they're always stressed but then thinking about
it they if they were they would they still be alive after all this time. But yeah we're going
to create a really nice environment for these today. They've been in here for a good it's
getting on for seven eight months now and they deserve something bigger better and a bit more
exciting but they're a really good group. They seem to get along really well. The colors will
come out a lot better in a different tank as well because they're quite sort of muted at the moment.
So the tank can come in two colors. Well not the glass obviously but the rims and the hood and I've
gone for the white one because I think it will match really well with a previous setup I did
from Superfish. There we go look at that. I would say that this is the perfect size fish tank if you
well I would pick forefoot because I've got the space but if you don't have space for a forefoot
this is the the best size because you can do so much with it. This is the perfect dimensions.
You don't want it too deep that you've got to like put so much sand and things like that in
but you do want a half decent amount of height so you can actually show off your scape
and yeah looking good. So yeah with the kit you get the heater which I'm not going to need because
I heat the room but you might. A net because you can never have enough. Thermometer. Filter.
Some tap water purifier and some beneficial bacteria get things started so that is everything
you would need to get started other than fish, water, hardscape and all of that. So yeah I went
for the white rim because over here it's going to look great next to this one and this one's also
got a black background on so I'm going to put a black background on this new tank as well and to
do that I use black masonry paint the smooth variety mainly because it goes like a plastic
film and it's easy to scrape off if you want. A little sponge roller and a heat gun is optional
but it does massively speed up the process. There we go a pure black and you can't see through it
at all. Right let's get it in the position I'm actually going to be scaping and keeping it in
put the lid on and show you the lighting as well. So we've got a lid here we've got a nice little
flap for feeding and everything like that so you don't have to lift it up not that it's too hard
it's just a bit of a pain isn't it and we've got one led strip and as you can see there is a gap
for a second one should it be needed I am not sure yet I mean I'm thinking for a low-tech
scape that one light is probably going to be enough if you put too much in all we're going
to do is get a ton of algae I need to hide that as well it's very ugly you go away there we go
that looks better yeah I think what I'll do is just scape everything first and if I need to add
some more led strips than I can because I've also got these two here now these are optional extras
they don't cost a huge amount for upgrading the lighting if you need to so this one's just pure
whites this one's whites and reds as well just to see how it goes saying all that though I can't
very well scape it with the lid on can I and if I remove the lid I also remove the lights which is
fine when you're at home but making a production for you guys that doesn't really work so I also
have a spare 60 centimeter super fish scaper light here oh did I no it's fine um so I can just put
this over the rim now if you want to you can upgrade to this light you can buy it separately
it's a really really good value for money as well it looks sleek so there is options to upgrade with
this tank as well lighting wise I mean all of these lights that are in it will definitely do
the job it just depends if you want to go open top or not not everyone does so it's both options
really there we go I think that looks great especially with the black background I'll put
the lid on at the end obviously and uh swap out some of the tubes as well just to get see what
colors we can get but yeah for scaping obviously I need this gap don't I right composition wise I'm
going to switch things up a little bit because we've got all of them with open flat foreground
and then sort of staggered backwards what's that composition concave convex one of those but like
all of them have got like flat fronts if you know what I mean so I want to make this one a little
bit different I'm going to go for a triangular composition you might notice I've shoved it up
as well because I want to put a little nano scape in there I think that'd be cool so yeah triangular
composition but for that first of all we need nutrients down in this back corner and to start
with I'm going to put in some Nutribase just fire this in the back corner it's really good stuff
it's got like loads and loads of nutrients in it it's also got dormant bacteria as well which means
starting a tank is way faster that's what I found anyway use the Nutribase and you're like doing
really well after just a week so I'm going to put the Nutribase in the back corner sort of raised up
we want the thickest area of substrate in this back area because that's where most of the planting is
going to be I then thin it out as it comes closer to the foreground and then on top of that I'm
placing some pond soil now this is just like regular soil but it's had some of the nutrients
removed so it's not quite as potent which is good because if it comes up into the water column
not an issue you can get this stuff from like most garden centers or pond places I'm then taking some
recycled substrate which is a mixture of sand and gravel and just capping over the whole lot just to
lock it all down it's also going to add extra substrate to plant into but this won't be the
final layer the decorative layer is the final one I also like to pat everything down just to make
sure there's no gaps and then I use a flattening tool to just scrape it away from the foreground
because it's not what we want to be seeing when the scape is done okay that's all the boring stuff
out of the way but absolutely necessary I even do this when I'm not putting a ton of plants in the
substrate as well I just find it makes a better balance for the tank you've got this full-on
system underneath that just works but that's not what we're doing in this one this one we're putting
lots of plants and not a medium amount of hardscape I'd say now rocks for our border
we've got quite a bit of serious stone we've got quite a few rounded pebbles in the crate
and then we've got quite a lot of dragon stone as well which I think will lend itself to this
tank quite well plus I haven't got any dragon stone in any of the other scapes up here and
I'm trying to keep them all a little bit different so I think that'll work well now the great thing
about having dragon stone is that it kind of scapes itself you just sort of chuck it in and
because it's all detailed it even a pile of it looks good but for this one we're deliberately
putting it in like a retaining wall which can look a bit odd on its own but once we put the
rest of the plants in and the wood as well it will tie it all together really well plus dragon stone
is also really good for being able to put epiphyte plants in like you know anubias and java ferns I
find that the bonsai anubias works really well with dragon stone now keep going with this piling
in rocks until you've created what you consider a wall that will lock sand behind it because in
the sand behind it is where we're going to put our plants and it's like the dividing line between
the foreground and the background you can create a really neat open foreground or you can use
aqua soil or something like that and plant a load of monte carlo to get a full carpet in this one I
want to do it just sand though keep it simple there we go look looking good added in a couple
little extra smaller bits in the foreground as well just to bring the dragon stone out a little
bit and I think that adds quite nicely to it but now cap everything again with your decorative sand
or you can even just cap the foreground if you're looking to save but I'll just add more everywhere
so I've got some spare play sand which I'm going to put in the back just because the decorative
sand I haven't got a huge amount of it so anything will do you see just to cap with in the areas
we're not going to see the sand not that there's anything wrong with the play sand it's just a
different color tone to what I actually want to be seen in the scape it's also nice and fine as well
so it locks down any particles underneath and then in the foreground I've got a pool filter sand and
you can see it's a lot more sort of white in comparison to the play sand I think if I used
to play sound with a dragon stone the colors will just mix there won't be much contrast and most of
the time if you can create contrast with your rocks and sand it looks a lot better than if they
all merge in as one okay looking good and now it's time to get the perfect piece of wood for this
scape and welcome to wood world okay right let's have a little look we can't have anything too big
now do I go for a brand new piece I always sort of leave the brand new pieces of like spiderwood
because they've got this color it doesn't stay that color it goes like all the other browns
I'm always put off using it to start with because it just doesn't look great but maybe for this one
I should try it fresh as if it's you guys buying some from the shop that bit's actually pretty
good I think I want that bit and it should sit nicely in this area looking at that that's a lot
in one bit can I manipulate it to sit a little bit differently I can but it's huge it's pretty big
I think if anything I need to snap off that bottom and it could work there we go I snapped
off the bottom bit and that means I can get it in about there I think that works a lot better
this is nothing groundbreaking by the way it's just your traditional sort of triangular composition
so we've got room here all the plants will be able to be seen we've got room for our filter as well
because we don't want that on show really so we can put it behind the plants in this section
and then we're going to need something here as well I reckon so I've cut up a smaller piece
hopefully it sits good yeah I think that works perfectly I can see straight away got some good
contact points as well because we're going to need to glue this wood it's never been used
that's just keeping everything going keeping the same sort of theme of wood loads of spaces for
planting as well and this place is in between it all so I'm now going to use the superfish glue
it's like a gel and works way better for putting hardscape on rocks and it's a simple case of
finding some contact points like here and just splodging it on now this is of course rather
boring but very necessary because this wood's brand new and will definitely float up and there's
nothing worse than that and you've spent ages getting everything right and in position try and
get as many contact points as you can because you can't really put too much on always better to be
safe than sorry and you can either be patient and wait overnight for that to dry you can do what I
do and get some of this stuff which I'll leave a link for spray it on it goes hard straight away
and it's not bad for fish or shrimp or anything I've used it loads of times with no problems
you only need a tiny bit as well that's already stuck down okay that is all not going anywhere
and now it's time for some planting and I am talking about you guys this is my little greenhouse
for plants all of the ones you can see in here or the whole studio actually are from aquaflure
look at the quality of those oh let me get them out I want some really nice java ferns but not
too big if I remember there they are we've got some java fern at windelof which is smaller but
will work perfectly for our small escape obviously I'll put a big one in as well one sort of main
feature one I think it'll be awesome yeah just look at that the quality from aquaflure absolutely
huge all the leaves are perfect just what we want from our java ferns and there is no better place
for this absolutely gorgeous plant than right in there that works so well and then making sure we
keep that pathway open in the middle the other one can come on this side maybe we can sort of
pinch it in there yeah that's cool then we've got room for some more sort of anubias down underneath
I often find it's quite good to put java fern on the top parts anubias in the dividing line between
the wood and the rock it seems to tie everything together really well such a nice piece that might
need to glue it though yeah I've just stuck some glue on it just to make sure it sticks on that
part of the wood because I don't want it sort of going anywhere else glues on just hold it down for
10 seconds I sprayed the reactor onto the wood and then the glue onto the plant base and then it
can just stick there because these plants don't have to be put in the substrate they pull all
their nutrients from the water column there we go that's not going anywhere now and then I've got
some amazing little pieces look of anubias there's bonsai and the normal nana in there I think look
that'll just lodge in there it looks like it's been growing there forever then I've got the larger
nana for this side not nana like your nana mind you it's about the same just wedging it in perfect
it's subtle there but the subtleties all sort of bring everything together keeping that gap in the
moment a little bit of anubias wants to sit in that gap though oh even better I've got a nice
piece of you can't see it there let me just put it in this piece of boos glued onto a rock
that means I can tilt it forwards as well yeah nice that looks so good then I've also got some
boos thea I think it's pronounced which is one of my favorites that can sit there like that
that looks amazing loving that and then I just want oh hello buddy then I just want to close
up this corner with a bit more anubias petite so that can sit right in the gap look just creates
that illusion then that we've got an island more because it's all enclosed now but that is perfect
looks so good so for the next part I'm just going to fill the tank up I find it a lot easier to
plant stem plants when the water's already up you can see exactly what height they're sitting at
and you know how to shape them a little bit better if I was to put them all in now they all flop over
when I like fill up with water they're kind of everywhere it will make the water a little bit
murky but it's okay not a problem get that clean in no time so there we go we're filled up I think
the next job should be to get the filter in the back corner so then when I plant I know exactly
where I'm planting and where to avoid and the filter that comes with the kit is more than
capable of doing the job 400 liters per hour you know up to 100 to 200 liters well you know that's
plenty powerful for what we've got plus we are putting better fish in here as well so
they don't like a lot of flow it's a decent size it's also if I remember how to do this I don't
bottom there we go no that's the top there we go so inside of here we have got activated carbon inside
and then um just like mechanical filtration with the sponge as well so very good and that's fine
enough as well to get the water crystal clear there's also a little controller here to control
the flow rate if you do want to turn it down we might need to we'll just see and there's also
a spray bar which I will be utilizing again it just keeps the flow spraying over that top area
it means that there's plenty of spots in a tank where the fish aren't going to be blown around
so yeah I'm going to put it right in this back corner the good news is with the black background
as well look you can barely see it oh there we go that's about the right height switch it on
okay there we go that's currently on full flow and it's only skimming across the top but look
the rest of the water column it's pretty gentle I'd say so I think we can keep it like that for
now let me turn it down a little bit whilst we're doing the plants there we go there's the lowest
set actually yeah that's perfect we don't need any more than that now for planting in the back
section I think it'll be really really cool to just use red plants you've got all that green
in the sort of mid ground and then just explosion of red behind it I think it would look awesome
and for that I'm going to use a load of plants from the barb tank now it needs to trim up anyway
so this is the perfect way trim it right back and I've got tons of red stems to be able to use
now I'm going to be brutal and go in really deep with the scissors and cut down nice and low to
make sure we can see all the plants in the other tank over the top so like right down at the base
of these plants I'm trimming because they're not really receiving any light down there anyway so
by doing this the regrowth will come right from that bottom section and fill it all out nicely
again there we go massive trim up there I've left a few at the back because you know I like the red
this in there but this is how much I've managed to take out there's a lot there I'm going to use
all of them because why not so what I've done is clumped all of the plants up together put a little
bit of paper towel around them and then a plant weight ceramic plant weight these plant weights
come in with delivery of plants from aquaflora and I keep them and use them for instances like
this and now all I've got to do is slot each one where I want it and I can just get the right shape
and everything then because some are taller some are shorter so foreground and background
there we go now we just need to let the tank sort of clear and then we can put the fish in
but I do want to bring the brightness down a touch it's not quite as bright as the camera's
making it appear but if I put some floating plants in the top here they'll go over to this section
take some of the brightness down off of the white sand and I think that's going to be better for the
better fish better for the better fish so I'm adding in the mini water letters just because
it's the most easily manageable you could just come in and take it out whenever it gets a bit
too much which is always quite quickly it's going to collect in that back section for sure
but that's all right there we go look a couple of days later everything's looking really clear
although there is a slight tint to the water and that's to be expected coming off the spiderwood
and also these funny little fungusy things here that's very very common for this type of wood so
nothing to worry about what I'll do is I'll brush those off with a toothbrush and then just change
the like half the water something like that and that'll sort of reset it back to perfect conditions
to put in the fish so I just want to add a little bit more detail to the foreground area so I've got
some pebbles here got five pebbles and I've got some stringy moss I'll probably use all of that
and a little bit more as well it's called stringy moss I've never used it before apparently it grows
sort of tall and stringy and I think that might look quite cool in the tank I'm just going to glue
some of it to each pebble and you can just place it wherever we want it now the moss grows in this
sort of gel so you do have to wash that off first there we go all washed off and now it's just a
case of dividing up however big you want it I'm just going to go in half placing some glue on
your rock I don't want too much because otherwise it would like seep through the moss and then just
lay it on press it down and the whole rock is covered then you can't see the rock at all and
it just looks like these perfect little mossy stones here we go then I've got five nice pieces
and we can just place them wherever we want look at that just sort of blends it all in nicely and
brings it together nice big one there I reckon let's have a little smaller one out in the foreground
and then one in this section and then I think and then I think one more down here as well
perfect and they'll just continue to grow as they want they'll probably cling to bits of the rock
and make their way everywhere it's got to keep on top of trimming the moss I mean when you've got
one tank it's quite easy but I've got so many that you turn around and come back and it's everywhere
but this one I'll keep it short now you could if you wanted add more detail to that foreground area
but I've added sort of like scatter stones and gravel in all of the other tanks in this sort of
area so I'm thinking just keep it plain a little bit different then and it does create like a real
sort of clean look but first of all let's put the original hood on take off the superfish scaper
light and just see where we're sitting because to be honest that's a lot of light for this tank it's
going to get algae on that sand so just for comparison you guys ever wondering if anything's
too much light I'd say for that bright level of sand there it will cause algae so let's put the
hood on which has got one bar in we've currently got this one strip bar in if we need to add the
other one we can let's just see how one does first there we go look that is looking good yeah I like
that I'm definitely sticking with that it's not too bright obviously the camera does compensate
but that is looking a perfect sort of light level for me for the better to be able to enjoy it they
don't like it too bright you see but they have got plenty of places to hide for cover those
floating plants that you can see in there will multiply very quickly as well but yeah we're
ready to put our fish in come on girls let's get you out of this boring tank so here we go then
in goes our group of girls now remember all temperatures matching so they're all good
straight in okay so now some of them are showing the stress stripes as you'd imagine because they
usually don't show them but some of them are because we've just put them in a new tank and
taken out the other one so that's understandable and now the fish are in I'm going to add in some
beneficial bacteria because this is a new filter in there now what that's going to do is seed the
whole tank now we've got such a low bio load in there that there's not really going to be anything
to cause ammonia spiking or anything like that but what I will do is I'll come in tomorrow morning
I'll test the water make sure there's no spikes in ammonia or nitrite and then if there isn't I'll
just leave the tank just let it to do its thing but if there is I'll do a 50% water change and
I'll just continue doing that until it's showing no signs of ammonia now this is called a fishing
cycle and I do it a lot with great success if you're not accustomed to doing it I suggest
starting with just one fish only and putting it in then over the course of like another week or so
maybe put a couple more in and then a couple more up until the the actual final number that you want
to actually add I find it completely safe to do this just don't rush the process there's no need
to really is there obviously I'm doing it a little bit different because I'm producing a finished
video for you all in one go and I have a lot of experience with it now but look at this look at
how good the lighting is I'd say this is absolutely perfect light for this tank with these fish
the plants will continue to grow and they'll stay red as well and the light that comes with the kit
is the one that we're seeing here so all of this is included and I have to say I think that is
fantastic value for money you're getting this whole thing for around 100 pounds I mean that's
crazy isn't it 110 euro something like that full kit everything you need obviously not plants and
substrate and that sort of thing but remember with any tank when you start get big pieces of
hardscape like you can see here and as many plants as you can afford the more you put in the easier
it is to start the less chance of algae and the more beautiful it looks as well so yeah I hope
you've enjoyed this one guys it's given you some inspiration remember if you're going to do a better
sorority with girls like this all of these came from the same batch when they were young which
does help a lot but also they've been together a long time I suggest making sure if you do go for
a better sorority heavily plant the tank like already loads of them are going in and exploring
these plants they can find their own little zones and territories and that's the key really in the
other tank it was a little bit different and they've been in there for a long time and like
I say they're so used to each other but if it's a new group definitely tons and tons of plants
breaking up lines of sight and that sort of thing little caves little areas for them to go in so
what I found is the uh stress stripes that look like that are not stress stripes they're like
jaggedy so when they're jaggedy it tends to be more of their coloration rather than when they're
straight it tends to be like because they're stressed like that one there is obviously where
he's just gone in or she's just just gone in sorry this one's probably the boss of the tank
hence just a fully block colored or they just might not oh look at I've just yeah of course
we've got the male better right next to him I'm gonna have to put a slot in there I'm gonna have
to put some paper in between this gap because that'll be just too much for him and her constantly
and to be honest there's potential to put one across and do a little bit of breeding I'll have
to read right up on that though because I know that if you if you don't uh like monitor it and
do it for too long the males can kill the females eventually so yeah that's one to look forward to
though a little bit of breeding I think that's going to be the prize one because that is the
dominant female of the tank for sure look at this he's showing off he's lit he's flaring and
everything let me come around yeah he could see very interested so out of the group there's only
a couple that actually have the stripes all the time I'm pretty sure this one is usually a full
block of color but give it a couple of hours that we settled right in I mean it's a far better tank
and even in the other tank which didn't have all this cover and everything they were still fully
block colors so yeah pretty happy with how it's all turned out but yeah deliberately a nice simple
design here that everyone can replicate give it a go if you're interested and have to take a look
at this tank if it's going to be your first tank I'd say this is a great first buy I hope you've
enjoyed this one and I'll see you on the next one
