Eric Smith: The Functional Potter

Making ceramics and glass
106 followers
I fire a large wood kiln. It's not perhaps the most sound way. There's a lot of risk.
There's a lot of loss. But what you get out of it, if you've put, I think, your full heart
into it and energy and commitment and time and focus, you end up with something
that's quite unique and extraordinary. Working with clay is so basic.
Depending what kind of clay you're using, it can be so responsive and alive. My name is Eric Smith
and I'm a functional potter and I live in Cummington, Massachusetts. Jill and I ended
up in Western Massachusetts after my apprenticeship ended in North Carolina.
We were going to set up a pottery and where she was going to continue her gardening and
landscaping design business. Everybody loves watching a potter make a pot. There's something
amazing about it. I feel the same way when I see a woodworker turning a bowl. I'm blown away.
I can't believe they can do that. The material for me is just so unrestrictive. It can really
bite you. It's easy to lose pot. I lose pots all the time. But when everything is just right
and they start coming off the wheel, it's this really beautiful almost exchange between you
and the material where you feel like you're really working together on this thing.
The way I work, it's pretty athletic. I stand, I don't sit.
There's movement and I move and the clay moves and together we create these things that
on the best of days will even blow me away. I'll come back in the evening and think wow
it's hard. I can't believe I made those. What I like about the material is that it does not
feel precious and that's why I choose to make functional pots. I don't want things
necessarily to be looked at. My primary focus is that they're used.
So the materials I use here are fairly straightforward. I get a stoneware clay
from North Carolina that gets shipped up several times a year. I get about a ton. It's just a clay
that I trust and I like to work with so I am willing to go through the effort of getting it
up here from there. I also worked in North Carolina during an apprenticeship so the clay
has some connection to that time for me and it has a familiarity about it. There's a language
of clay down there. This is a craft I feel what I'm doing like a good electrician. When you go
into a house where the walls are torn out and they've just put the electrical work in and you
see a good webbing of electrical it's like wow that's amazing. It's beautiful to me and I've
always been attracted to that skill of anything whether it's a good cook or a good woodworker
or somebody that makes marble tops. Whatever it is I've always been, it's from a kid,
from the time I was a kid I've always been fascinated with that. So I take a great deal
of pride in making a very good well-made skilled pot. My intent is that people will pick these up
and take a breath and say wow I need that. I think the response is that they're not
challenging. I want it to be a very immediate response to where you see it and you want it
and you're not sure why or you see it and you want to pick it up and you're not sure
why exactly. To be able to walk into someone's space I think puts the pots in context that
that is rare to see these days. It's very different than going into a gallery. I just want
these things to end up in people's homes and in their lives and a part of their daily rituals
that they go through whether it's scrambling their eggs in a mixing bowl or drinking their
coffee or tea. There's nothing that moves me more than a great pot that I hold in my hands
and can actually use and touch and feel. So you can take a wood-fired pot and turn it and
I never tire of it. There's always something new. The surface quality is so rich and so deep.
With wood it's a ferocious type of firing where you're consuming a lot of wood. The wood ash is
flying through the kiln. It's sticking to the pot. It's melting. Because the kiln is large I need to
make a lot of pots to fill the kiln and I'm the only one filling it. You have to be fully committed
to giving up a great deal as far as predictability. Oftentimes there are spots in this kiln and in
other kilns where you know you might be risking it a little bit. So I spend about five days loading.
I do that alone and it's a time I actually really enjoy. It's a puzzle. I piece it together every
time. It's always different and I take a lot of care and pay a lot of attention
to making sure things are, posts are straight, shelves are level, pots are in the right spots as
best as I can tell. And I do, I enjoy that time. So after I load the kiln you know I brick it up
and we start a small fire and the temperature is maybe about 200 degrees. It's like a fireplace
and we depending on the pots that are in there it's typically about a 24 hour and
preheat is what that is. And then from there we start raising the temperature
very gradually about 50 degrees an hour and you just incrementally raise the temperature until
you finally hit about 2300 to 2350 and that's typically on the last morning of the firing.
The whole firing from start to finish is between 50 and 60 hours. This is a beautiful kiln and
it's very responsive. You know a lot of people struggle with their kilns to reach temperature
and it's like shoving wood in and they're cursing and can never get temperature and this is this
thing just wants to go up, up, up, up, up. So it's more a matter of slowing it down and just
making sure you take your time which is why I have a kiln log. I have a a good team of people
that are friends and neighbors that help out. We do six hour shifts. So you come and it's all laid
out what temperature you're supposed to be at at what hour and they follow the book and feed
the kiln and raise the temperature accordingly. I then move to the to the back of the kiln and
start firing the sides of the kiln by introducing wood actually into the the ranks of pots that are
set from the outside while they're maintaining temperature up front. It's called side stoking
and what that's doing is pulling the heat back to raise the temperature throughout the entire kiln
for a 15 foot stretch. After all the temperature is up to where I want it throughout the kiln
high and low front to back I then salt. So I use a lot of salt about 100 pounds per firing
which we blow in with a modified leaf blower with a funnel and a big nose on it
and what that does is creates the salt glazing which basically the the salt is sodium and so
the sodium reacts to the silica in the clay and creates sodium silicate. I think in industry they
would casually call that liquid glass. It creates this beautiful shiny very slick surface which can
also go kind of what's called orange peel or it's kind of mottled speckly but it's a beautiful
surface that I love. We did a lot of salt glazing when I spent my time in North Carolina. We used a
little bit of salt in the kiln I fired in Ohio but North Carolina is where I really got turned on to
the heavy heavy salt glazing and I just I love how it reacts to the clay and the glazes and
what comes out of it. It's very powerful and there's a lot of movement and because it makes
things run and it makes things bright and I love that. I try not to get too overly attached
to anything because that is part of the process and that's really what this place is about is process.
