Bichon Frise pet trim

Dog grooming and care
37 followers
Hi everyone, my name's Melanie Newman and welcome to our grooming channel.
Our guest today is Jamie the Bichon. He is a 13 year old Bichon and today I'm going to share with
you how I trim him. So I trim him in a modified Bichon trim because he is older so it is more
like a pet trim but I'll share with you all my little tips. So let's just get straight into it.
I have already bathed and dried him. So I've bathed him in our new puppy collection and I
know he's not a puppy but I'm absolutely obsessed with this collection. It's beautiful. So I've
already bathed and dried him. I've got out all his knots and tangles using my slicker brush
and a wide tooth comb as well as a fine tooth comb. So I use a fine tooth comb to make sure I've
separated all that coat for when I've clipped him because I can't clip him with any knots in his coat.
I've also pre-done his nails. I've clipped out his pads and his private areas. I'm going to be
clipping Jamie today. So I'm using my Oster 3000 eyes. They're a cordless clipper. These
are my favorite clippers. These are what I use every day. I'm also using a wide tooth snap-on
comb with a 30 blade underneath and the length I'm doing on his body is 5 8 or 16 millimeters.
I'm going to begin by clipping from his wither
down towards his tail. So I'm going to start by clipping his top line.
Once I've clipped his top line, I'm going to go down and around his ribcage and just
zipping out his flank area. So I'm not going hard in with the clippers. I'm coming in and just
skimming outwards. Once I've clipped his ribcage, I'm going to pull his ear over his head
and turn his head slightly and I'm going to clip probably from the point of his shoulder
and then just skim off because I'm going to actually scissor his legs later.
And I want my straight parallel line straight off. So I'm not coming in hard and then straight down
his legs. Coming in and straight down. That will match in with our clipper work on our ribcage
and our top line and our other side. So just following down our top line
and around our ribcage skimming over our flank area. So coming off our ribs and then just skimming
it and then moving his ear out of the way and coming off his shoulder and straight down
and then we're blending in where we've clipped his ribcage so it all blends in really nicely.
From our front profile we want nice parallel straight legs. So I'm just going to cross check
my clipper work and come off that shoulder and straight down that leg. So if he had really full
legs we would just be skimming over those legs and the other one we are going to be doing the
same with the rear as we did with the front. So turning on our clippers and then just skimming
straight off so we've got a nice straight leg and when he moves he's walking away from us that he's
not going to look like he's got broad legs it's going to be nice and straight. And his other side
just coming straight off so just skimming off anything that's hanging over around his knee
area and just blending those transitional lines from where we clipped his top line in.
As I clip around his rear I'm just going to follow the natural curve of his body
because this one should appear round so if I just follow his natural curve
it will just appear to be round and if I wanted to go shorter we can go in reverse with our clippers
and then just blend it all in. I prefer his chest area quite short and I prefer it really
short when we're heading into that jawline so I'm actually going to come up in reverse
and then flick it out once I hit his jawline and then go with the direction just blending all that
and skimming off in the front of his front leg so this will cut down our scissor work
with our using our blade to just skim over those legs and we can keep going over the area
just to make sure we've got everything. To clip his underline I'm going to gently hold his two paws
and lift him up and I'm going to go against the direction of his coat because I like this area
nice and short especially when I take him walking with the wet grass so it's nice and neat and tidy
and then blend it in by going with the direction and gently pop him down. Good boy buddy! If your
dog won't allow you to hold him up by his front paws another way is to gently hold his front paw
up and just stretching his leg out in front of him and then just coming in with the clippers
and it does exactly the same thing so going against and with just to blend it in.
I'm going to blend in in front of his two front legs so just gently coming in with my clippers
and it doesn't really matter if he stands or if he sits for this either
so just making that all neat and tidy in front of his front legs. I'm just going to give his body
one more go over with the clippers so making sure I've got all those little bits of tufts of hair
I'm going to clip inside his back leg so that will minimize the amount of scissoring I'm doing
so I'm just gently holding up his opposite foot and just gently clip out any little bits of hair
and his other leg. I have finished clipping his entire body so I may need to go back over it
later but I think I've got most of the hair nice and even so I'm going to begin now scissoring
his legs so the scissors I'm using today is a pair of blacksmith pnw curves so these are a 7.5
scissor. I'm also going to be using a pair of groom tech these are a 8 inch scissor so these
are quite long if you're not comfortable with using longer scissors you can drop down to a 7 inch
and I absolutely love these I use these on a lot of my legs when I scissor
so these are a 28 tooth pnw blender and these are a 7.5 as well so these are really good for
blending in that transitional line for where we've clipped and making that scissor work look nice and
polished. I'm going to begin by just gently combing down his hair on his front legs and
I'm using my fine tooth comb so this will separate the coat really really well and using my curved
scissors and gently putting them on a 45 degree angle I'm just going to gently go around the base
of that foot and I've clipped out his pad so I won't really need to pick up that foot to trim it
and the back of his front foot and I just want to minimize the amount of hair that is actually
touching the ground so that's the end goal and I'm just using the tips to work around those feet
and I'm going to continue this process on each foot once we've trimmed all four paws we are now
going to scissor his legs so the shape that we want to achieve is a cylinder shape so nice and
round and we want to come straight off that shoulder as well so nice round full legs with
our straight scissors we are just going to come straight off that shoulder and straight down
and just working the scissor around that leg to create that round cylinder shape as well
and this is just the outside of the front leg so it's nice and straight off that shoulder
when scissoring out the inside of the front leg what I like to do is just gently hold out their
arm in front of them so they're nice and relaxed comb out anything that we're going to scissor off
so we want to scissor in a nice straight line and we want to scissor towards the middle of our
dog's chest so towards that prosternum we don't want to scissor towards the underarm of our dog
because this will make little holes underneath that area so once we've combed everything into
place using our straights just coming straight up towards the middle of our dog we can cross check
by combing everything out again and then just gently place his leg back and let's not forget
the back of our front leg so just combing everything up and using our straights to come
straight down and then into that foot that we've scissored we would like the same width
throughout our front leg so from the top of our leg down to the bottom just going to comb
everything back up and pull everything out and using my coat conditioning spray
that keeps it all in place for when we're going to scissor and then using my blenders
i'm just gently rounding those edges off i'm not cutting any length off i'm just
rounding everything into itself and the front of our front leg
so making sure everything's nice and round and to scissor the inside of the front leg
i'm just going to lift the opposite leg and just scissor everything into nice round curves
and i still want the same width i'm then going to just comb up where our clipper work was
our transitional line so our clipper work into our scissor work combed all that up and i'm just going
to smooth it out with the blenders so any little bits of hair sticking out that the
clippers have missed i'm just going to scissor them off and we are going to repeat the process
on the other leg we are just going to tidy up in between his front legs we're just combing that
through and with our blenders just scissoring off any little tufts of hair we are now moving
onto our back legs and the process is really similar to the front legs so we want nice
straight parallel lines so anything hanging outwards we are going to scissor off so we're
going to comb everything up and out with our fine tooth comb and then using our straights
just scissoring anything that's sticking out off remembering earlier we clipped out
in between the back legs we are just going to brush all that out or comb all that out
and then using our straights just coming straight down
just scissoring off anything that's hanging over anything that the clippers have missed
and again we would like the same width with the leg so we don't want big
hocks or a really really big bum we just want the same width throughout this whole leg
remember that we've clipped the back of his back leg earlier we're just going to tidy up
this nice curve and we're going to use our blenders for that so just combing everything
upwards and pulling everything out and i'm just going to spray it a little bit with a
coat conditioning spray so this actually keeps it in place for when i'm scissoring
so i'm just neatening up anything that's sticking out so i'm blending in the clipper work and just
making sure it's nice and smooth and i get this nice little curve happening
so everything's nice and round i'm just going to comb up around his little bottom
and with my blenders just blend in where i've clipped him nice and short to where i'm keeping
it a little bit longer i would like to then blend in this nice swoop that's coming off his rear end
into that hawk hair so i'm going to gently comb it up again with my fine tooth comb
and then with my blenders just use them to scoop out that area and then i'm just going to
round off the hawk area into where we've done a little bit of a scoop out and moving on to the
front of the back leg so where his knee is we are not going to take off much hair because he
doesn't have a lot to take off so i'm just actually going to tip that area and try and create a little
and just tidy up in that flank area and any little bits of hair we've missed
let's give it one quick check with the comb good boy buddy and repeating the
once i've finished his little body we're moving onto his head
onto his sweet sweet face so i just need to scissor out in front of his eyes so i'm actually
going to use a pair of pnw thinners and these are a 65 tooth 7.5 in length but i mostly just use
the tip of these and just gently placing them up into the corner of the eye and just gently
scissoring that out and i prefer to use thinners with his face because he is that little bit older
so his hair is a little bit thinner and if i shave it out it actually looks too much so i like a nice
soft blended look and going with the direction of the hair on top of his nose in between those two
eyes and i keep all this hair here as much as we can so not scissoring that off once once i've
scissored out in front of his eyes i'm actually just going to brush a third of his fringe forward
so not all of it it's probably about that much so just gently combing that
and you can either use curves or straights i just prefer straights because it gives a more
definite line and i'm just using the tips and just coming through on a 45 degree angle
just to trim that fringe and i trim roughly about a centimeter past the corner of his eye
so this area and you may need to just comb out any little hairs to make sure you've got them all so
no little hairs are going into his eyes and constantly comb that area down just to cross
check all your work and his other eye so again a centimeter past the corner the outer corner of the
eye and comb it all down just to cross check we've got everything so no little hairs are going
back into his eyes and if you notice i'm just using the tips so i've got that little bit more
control with the tips so when grooming our bishan head we would like the appearance to be round
from the front and round from the side and if he'll put his head down and round from the top
so that's our appearance so we can change the size so he'll have a smaller bishan face because
he is a little bit older and he is missing some teeth so i don't like any little bits of hair
getting caught in his mouth so i'm going to begin by combing all this hair down and remember we've
clipped up to that jaw line and using my curved scissors i'm then going to head towards his ear
so we're starting our round head and just roughing in our shape to achieve this round bishan head we
need to keep the hair in front of that ear as soon as we take that out and then we expose the
break between the cheek hair and then the ear hair so we need to keep that hair so it's nice and full
and just trimming up towards the top of the ear
and still trying to keep in mind that we're trying to keep a nice round head
so i'm actually not scissoring the hair on his cheek just yet and his other side
and a good tip is to really comb out your work so once you've scissored it comb it out
and then scissor the shape again i prefer a round his jaw line quite short so no hair is going to
go back into his mouth because he is missing some teeth and he does get a little bit messy as he's
got older now i'm going to switch to my blenders and this will just soften everything and i'm still
just working on that front profile so i haven't moved to my side profile yet once i'm happy with
my round head on my front profile i'm now going to move to my side profile so coming in from the
start of his nose and just rounding off his muzzle into his ear and then back around so just creating
that nice round circle so using my comb to comb everything out and i'm going to use my blenders
and again i like him to have a nice short muzzle so you don't need to take your dog's muzzle this
short and then follow behind that ear because we've still got our crest through the through
his neck area so this is how short i'm going on his muzzle so i like to just comb everything out
and then with my blenders just work blend in that muzzle with the rest of the roundness
so i still like him to have that fish honey look but it is really hard for him with the
missing teeth that he does have because he is that little bit older he's an older gentleman
so constantly watching the side profile and the front profile at the same time so combing all
that hair out so we don't miss any hairs and then using our blenders to blend in our muzzle
and again you might want to do the dog that you're grooming the muzzle a little bit longer i just
prefer his muzzle quite short so remembering that you want roundness from the side and roundness
from the front so when you're grooming the dog that you're grooming you would just leave a little
bit more muzzle so you get a nice round line through up and around i'm just going to comb up
the hairs on the top of his nose and with my blenders scissoring downwards so i'm blending this
and just tipping that area and the other side if we scissor upwards we may take too much hair
and if we scissor with the grain it will actually blend the coat really really nicely
you can take up in their jawline a little bit shorter if you prefer
just comb all that hair down using your blenders or your scissors coming in and around
keeps it nice and neat and tidy and scissor that transitional line in where we've clipped to where
we've scissored and once we're happy with the shape of his head i'm now going to scissor his
crest in so what i'm going to do is comb all this out and then pop his head backwards and then just
scissor straight down into his withers so from the middle of his skull let's come straight down
into his withers and then that gives us a nice crest
happy with that shape we can just blend all that in with our blenders just blending in our
scissor work to our clipper work on our neck area so we've scissored in that crest and we just want
to blend it into the areas that were clipped on their shoulders and on that neck it's nice and
neat and tidy i'm happy with how his little head has turned out so jamie is all finished and he's
feeling pretty good he looks back to his normal self if you guys have any questions pop them in
the comments below and please like and subscribe to our channel and until next time happy grooming
