How To Light and Use Natural Incense Charcoal from The Incense Dragon

Relaxing with agarwood incense
22 followers
#frankincenseart #agarwoodincense #meditation #relaxing #healing
#healingmusic #meditationmusic #relaxingmusic #reducestressfatigue
Charcoal from the Incense Dragon is quite a bit different from the typical imported charcoal
sold in most shops or online. This charcoal is about half an inch thick so it's comparable in
size to other charcoals. Our charcoals are made using pure charcoal powder in a natural binder.
We don't use potassium nitrate which is used to make self-lighting charcoal.
You can see the detail on this charcoal leaf is highlighted with silver mica.
Different colors are used to indicate the types of wood used to make the charcoal.
To light the leaf, hold it with metal tongs, tweezers, or pliers. Hold the charcoal in the
flame of a burning candle. Light the edges of the charcoal by holding it directly in the candle's
flame. Slowly rotate the charcoal so that the flame touches every edge of the bottom.
When there is a solid gray line around the bottom edge, hold the top edges of the flame
in the flame briefly before placing the charcoal into your sensor. Once the bottom edge is burning,
you can place the charcoal into a typical brass sensor or, for best results, you can use a sensor
filled with ash. Allow the charcoal to sit for several minutes to become fully lit. Once the
entire surface is covered in gray ash, it's ready for use. You can place resins, woods,
and herbs directly onto the surface of the charcoal. Although this charcoal is burning
at 850 degrees, it's cooler than the self-lighting charcoals like Three Kings or Swift Light,
which means your incense will burn longer and you get more for the same amount of money.
