Making Incense Using Wine, Tea, Coffee and More (Incense Magick Ep. 008)

Relaxing with agarwood incense
22 followers
#frankincenseart #agarwoodincense #meditation #relaxing #healing
#healingmusic #meditationmusic #relaxingmusic #reducestressfatigue
Self-combusting incense, like sticks and cones, require a binder to hold them together.
Now, water is required to activate both gum binders and wood binders, but you don't have
to limit yourself to just water. Any liquid that's mostly water will activate your binder.
In this episode of Incense Magic, we'll take a look at using wine, tea, coffee, herbal teas,
and more in your incense. Don't pour out that flat wine. Hold on to it,
and I'll show you how to use it in your next batch of incense.
The most ancient incense recipe known is Egyptian kefi. Kefi was a critical tool in ancient Egypt,
which was sometimes described as being filled with fragrant smoke from one end of the Nile to the
other. Kefi is very complicated to make, as many ritual incense blends are, and wine is a critical
component. Although kefi falls into the realm of non-self-combusting incense, it's good to note
that the use of liquids other than water in incense is as old a practice as we've ever found.
If any incense purists try to tell you that water is the only acceptable liquid to use in incense,
I hope you'll laugh in their faces and cite this historic precedent.
The topic of using various liquids in non-self-combusting incense will have to wait for
a future episode of Incense Magic, but today we are going to explore some of the huge variety
of liquids you can use in your incense sticks and cones. The first question that many people ask
is how much impact do different liquids have on the scent of incense? And really, that depends
on the liquid that's used and the way that it's used. Some liquids will have no obvious impact
on scent at all, while others have a profound impact on that scent. Even for those who use
incense strictly for its pleasurable scent, different liquids can have an impact, but those
of us who use incense on an energetic level will also notice a difference when more unusual liquids
are used, but we'll discuss that a little later. Adding a liquid, even a fragrant one, will not have
the same impact as adding an essential oil in most cases, but having said that, although it seems
obvious to say, remember that essential oils don't contain water. You can add oils to your incense
for fragrance purposes or to make your incense easier to extrude, but no matter how much essential
oil you add to your blend, the oil will never activate the binder. Many years ago when I was
experimenting with liquids, I attempted to make water-free self-combusting incense by using only
essential oils and no water, so I ended up with a slimy lump of incense dough that wouldn't stay
together. It smelled wonderful, but I had to wipe off the bulk of the incense and then add water
in order to make the binder function properly. Now, in addition to wine, you can use beer and
sometimes of liquors or liqueurs for making incense. For example, you can use schnapps of just
about any flavor for incense making. Schnapps is very low proof, meaning that it has far more water
in it than alcohol, so any variety should work to activate your binder. Keep in mind, however, that
most schnapps is flavored using artificial ingredients. If you want to keep your incense
completely natural, avoid using any flavored liquors or liqueurs unless the label clearly
indicates that they're from natural sources. Now, there will be a companion booklet to this episode
available on my website shortly. It has the recipes we're going to make today, along with another
dozen or so, that illustrate the variety of ways that you can incorporate liquids other than water
into your incense. One of the recipes in that booklet is for a juniper incense blend that uses
slow gin as the liquid, and while you might think that incense made with flavored gin contains
artificial flavors, most brands of slow gin are flavored in the traditional manner using juniper
berries. So although that blend uses a flavored liquor, it still remains natural. If you're
interested in getting a copy of the booklet, visit my website for more information.
Now, many of the liquids that are used in incense making are considered infusions or decoctions.
An infusion is when plant materials are steeped in hot water, while a decoction is made when
plant materials are boiled in water. Now, in modern times, most coffee, and even most tea, is made just by
pouring boiling water over the coffee, like with a drip coffee maker. But as recently as 40 years ago,
most coffee was made as a decoction. Just ask anyone who was around back then about the hazards
of percolated coffee. Some coffee is still made this way, though it's still more rare in the 21st
century. You can use drip coffee or tea in your incense, but you'll usually get a stronger scent
from your liquid if you steep your ingredients in boiling water. The longer you boil them, the more
the oils will disperse into the water, although you can only gain so much from any one batch of
plant material. If you want to make stronger liquid, there are two methods, and the good news is that
you can use those two methods together if you want. First, a stronger decoction can be made by boiling
a batch of plant material and then straining that liquid. You can then return the liquid to a boil
and add fresh plant materials. You can continue this process for as long as you'd like to get the
decoction to the desired strength. A second way to make a stronger decoction comes from lessons
learned in the kitchen. If you've ever made a reduction sauce, you can do the same thing with
your decoction. Keep the strained liquid just below or at the boiling point and stir it every few minutes.
The longer you heat the liquid, the more water will evaporate from it. Now, as it reduces in volume,
which is why it's called a reduction sauce, it'll become thicker and more potent. Just remember that
you need to keep enough water in the decoction to properly activate the binder you're using,
so don't reduce it too much. I wouldn't use a thick decoction for incense that's being extruded
without watering it down first, and then what's the point of making the reduction in the first place?
Now, also keep in mind that the binder will require a certain amount of water,
so if you use very strong, very thick decoctions or reductions,
you'll have to use more liquid than if you were just using pure water.
Now, that's because the water in the decoction is a smaller percentage of the total liquid.
Now, you can make a decoction or an infusion for virtually any type of plant material.
You don't have to limit yourself to herbs that you might drink as a tea. If there's an ingredient
that you would like to include in your recipe, but it's difficult to work with, like my personal
bane, parsley, a decoction might be a better way to add those oils and the energy to your blend.
Now, likewise, if you have fresh plant materials, you can make infusions and decoctions without the
need to dry those materials first. Now, if you have multiple plant materials that you want to
include as decoctions, why not boil all of those ingredients together? It'll create a more cohesive
scent if you make the decoctions together, but if you have some of these decoctions pre-made in
their own containers, as I certainly do, try mixing them together as desired a few days before
you start rolling your incense. That'll give time for the various scents to melt together.
Now, one simple way to make decoctions is to check your local thrift stores and tag sales
for an old coffee percolator. Unlike a drip coffee maker, percolators continue to recirculate the
liquid as long as they remain heated. Now, percolators have a basket at the top for coffee,
but for making other kinds of decoctions, just fill the basket with whatever materials you want.
Pack the basket with ingredients, and then allow the boiling water to circulate for half an hour
or so. Then, remove the percolator from the heat and discard the contents of the basket.
You can then refill the basket and return the percolator to the heat,
and it'll continue to enrich that liquid. Now, you might occasionally have to add more water
when you change out the materials, but it's a good idea to just press as much liquid as possible
out of those materials before you empty the basket. That's powerful liquid you don't want to
waste. Now, you can find stovetop percolators in the outdoor cooking section of your favorite
camping store. Stovetop percolators are usually smaller and less expensive, but a freestanding
electric model is even more convenient to use. Now, I own both a stovetop model and a large
freestanding model, and I pay less than $10 for the pair of them at a local thrift store.
Electric percolators are thermostatically controlled, and they turn the heat on and
off kind of like a central heating unit does. You may need to run an electric percolator for
several hours to extract the maximum amount of oils from your plant materials. Just as with a
stovetop perk, you want to change those materials out every session, but you can continue to run
the same liquid through again and again to achieve maximum strength. Now, in addition to decoctions,
you can also make reductions. You can use the reduction method for any decoction and for most
types of liquids. A wine reduction, for example, will intensify the impact of the wine on the final
scent of your blend. One thing you should never do is attempt to make a reduction from an essential
oil or from high-proof alcohol. Remember that essential oils don't contain water, so you really
can't reduce them, and they're often quite flammable, so making a reduction from oils
is risky at the very best. Now, likewise, alcohol with a higher proof has very little water in it,
and it's very, very flammable, so don't try to make reductions with any alcohol over 80 proof.
Now, on today's show, we'll be making an ultra-simple incense blend that illustrates the impact of a
decoction on the aroma of your incense. You only need three ingredients. You'll need two tablespoons
of fine wood powder. In this instance, I'm using yellow sandalwood. You need an eighth of a
teaspoon of gum binder. Today, I'm going to use guar gum. And finally, about one tablespoon of
coffee reduction. You can substitute any of the types of liquids that we've already discussed if
coffee isn't your favorite, but by using a very familiar base like sandalwood, you can easily
experience the impact of the decoction. If you really want to compare, divide the wood and binder
blend into two equal parts and make one batch with plain water and the other batch with the
decoction. Once they're both dried, you can easily compare the scents between the two.
Now, blend all of the dry ingredients and mix them until the powder is one consistent color,
just like you would with any incense blend. Now, once they're mixed, you can add that liquid.
As with any incense recipe, the amount of liquid to add is highly variable, so I suggest starting
with about two-thirds of the recommended amount in the recipe and then add more as needed. It's
easy to add more liquid, but it's difficult, very difficult, to remove liquid if you add too much.
Now, with the liquid added, begin to knead the mixture by hand. You can add liquid a few drops
at a time if more liquid is needed. Once the dough is at the proper consistency, you can begin rolling
or extruding. Now, as with any incense dough, you can make cones, sticks, coils, or any other form
that you desire. Let's try one more recipe to demonstrate a different kind of decoction. Wine,
red or white, can be used directly in your incense in place of water. Wine is mostly water, so it
works fine to activate the binder, but you can also use wine to make a decoction. In this case, I'm
using a little white wine in place of water to make this decoction. I'm infusing this wine with
fresh lemon balm leaves. If using a pot, bring the wine to a low boil, just as you would with water,
and then add the leaves. If you have a percolator, you should fill the basket with the plant material.
Now, after boiling for about 30 minutes or so, longer for an electric perk, strain the mixture
and return the liquid to the heat and add a new batch of fresh leaves. You can continue to repeat
this process until the liquid reaches the strength you desire, but make sure that the liquid doesn't
begin to thicken too much. Thickening is a sign that the water content is dwindling, and as you
know, you need to retain some of that water in order to activate the binder and to make the
incense malleable and workable. Now, repeat the recipe that we made before, but this time use the
infused wine instead of the coffee decoction. When both are dried, then you can compare the
coffee to the wine experience and see how much impact the different liquids can have on your
incense. Yes, it really is that simple, but before I leave you today, I want to talk about another
category of unusual liquids that can be added to your incense. Now, though I've worked to make
incense magic mostly about the physical and mechanical aspects of incense making, with the
word magic, with the letter K in the title, some of you might have guessed that I also teach about
the energetic aspects of incense. Not only is there energy in natural incense from the plant
materials that are used to make it, your liquid can also have an energetic impact even if there's
no change in the scent. For those who make incense purely for scent, there's really no benefit to
using different types of water, but for those who use incense for meditation or religious purposes,
this can really have a profound impact on the energies released by your incense.
Now, what I'm referring to here is water that's taken from a special, meaningful place in the
wild, often called wild water. I like to call these meaningful places places of power.
Now, we call it wild water because it hasn't been purified or processed.
When you take water from a place of power, some of that power travels with the water.
Some incense makers only use water that was blessed or sanctified. Personally, I find the
energy in wild water to always be more interesting than tap water or purified water. A great example
of this is the incense that I make to sell my charcoal as well. I usually use water that is
taken directly from one of our beautiful rivers here in Oregon. Now, though the water that comes
out of my tap is from that same source, it's been filtered and purified, so a lot of that special
energy has been removed. Another example of this is from another place of power that I used to
visit on a regular basis. Yellow Rock Creek runs through my favorite state park in Arkansas.
On every trip I took there in the final years I lived in that part of the country,
I'd always bring home a bottle of water taken directly from that creek. While the water isn't
pleasant to drink without purification because it contains sulfur from Yellow Rock Cliff,
the energy that it imparts to my personal ritual incense has always been intense.
So now that you've seen some of the many different liquids that can be used in your incense, you might
find yourself collecting bottles of liquids right alongside your jars of herbs and resins.
And while the impact of various liquids on the scent of your blends can range from minimal to
absolutely overwhelming, this approach gives you new tools for developing the precise scents that
you want. Experiment with liquids, and if you make something outstanding with a novel liquid, I hope
that you'll send me an email about it. Now that's all we have time for in this episode, but if you've
enjoyed this video, I hope you'll subscribe to my YouTube channel and visit my websites.
On the next episode of Incense Magic, we'll look into ancient and modern processes for making
incense pellets. Some of those techniques use unusual liquids, such as the ones we looked at
today. Incense pellets produce amazing scents, even for novice incense makers. I hope you'll
join me then. Until next time, bright blessings.
