Making & Using An Incense Extruder (Incense Magick Ep. 007)

Relaxing with agarwood incense
22 followers
#frankincenseart #agarwoodincense #meditation #relaxing #healing
#healingmusic #meditationmusic #relaxingmusic #reducestressfatigue
Probably the most forgiving form of self-combusting incense is the jaw stick.
While a masala stick has a wooden rod in the center to offer support to the incense,
a jaw stick is nothing but a pure rod of incense. There's no wooden skewer to inhibit the burning
and the shape is very simple. Now getting that perfectly round or even square jaw stick requires
a specialized piece of equipment called an extruder. Extruders are simple devices. They
help you create professional looking incense sticks at home. Now in this edition of Incense
Magic I'll walk you through the process of making your own simple extruder and show you how to use
it. Pretty important. We'll also look at the specialized drying boards that are used and
even get a glimpse at an oversized extruder made using a caulking gun.
All of that and more on this episode of Incense Magic.
Now first let me explain that what we'll talk about and build on today's show
is completely different than the tools that are used when commercial incense is made.
The types of extruders we'll talk about are for artisan incense makers and for home incense makers.
Now jaw sticks that are made in a factory are created using hydraulic machinery that puts the
incense dough under tremendous pressure and then extrudes sticks in large quantities. Very large.
You can find video footage of these machines from many different places in Asia right on YouTube,
but unless you're planning to open an incense making factory the methods we'll discuss today
will likely be more useful to you. Now jaw sticks can be made in a variety of ways. You can even
make them completely by hand by simply rolling incense dough back and forth until you stretch
it into a single thin piece. Jaw sticks made this way are almost impossible to create with a truly
consistent thickness and appearance, but they usually burn just fine even if there is a significant
change in the diameter. But if you want to get a consistent diameter and a nice smooth professional
look you really need to use an extruder. The concept behind an extruder is basically the same
as a pastry bag. Incense dough is forced through a small opening so that it will emerge with a
consistent thickness and shape. Although it's possible to extrude incense in different shapes,
the round cylinder is most commonly used for incense. Personally I think round sticks have
the best burning properties, but any properly formulated incense blend should burn even if
you extrude it as a triangle or a square stick. That shouldn't matter. Now the type of extruder
that we'll make today really is simple and inexpensive. You only need to purchase one or
maybe two items and the only tool that you need is a sharp knife or a razor blade. The main part of
the extruder can be purchased in most hobby or craft stores. Any national chain hobby or craft
store should have one or maybe more styles to choose from, but if your locally owned craft shop
carries plastic clay like Fimo or Sculpey, then they'll also either sell a clay extruder, often
a clay gun, or they should be able to order one for you. Please support your local shops when you
can. I purchased this clay gun recently for about $12. Most brands of clay guns look pretty much
the same, so for all I know they're all made in one factory and they just put them in different
packages. So your experience will be very similar no matter where you buy your gun.
Now when you open the clay gun, you're going to find that it comes with an assortment of
small metal discs with different sizes and shapes of holes cut in them. Now it's tempting to just
load up one of these discs and start extruding incense, but to get good results you need to add
one more item. The reason for this is that the discs are very thin pieces of metal, so they act
on incense dough a lot like a knife blade. Now the plastic clays that these extruders are designed to
use really do come out of the gun with a smooth surface, but the thicker more viscous incense dough
tends to come out of the disc with very rough jagged edges and that weakens the stick significantly.
Now if you use a disc with a large hole cut in it, you may get a rough appearing stick that will
burn without breaking, but it's still going to be ugly. But the results are usually far better if you
just add a simple tapered tip to your extruder. More and more of these clay guns are being made
from plastic. My personal experience is that plastic extruders don't last long at all. They
tend to break on their first use. In general, I avoid plastic tools for incense making if they have
to be put under any kind of stress or pressure. You can try one, but I've broken, warped, or split
every plastic extruder I've ever attempted to use. You can even use a pastry bag as an extruder, but
again they tend to self-destruct almost immediately. Now if you absolutely have to use a plastic
extruder, you'll want to add additional liquid to your incense so that it'll flow easier.
That can lead to distorted shapes later when you dry the incense, but it really is your best
chance to avoid destroying a plastic extruder. Now this is a syringe that's used to dispense
liquid or gel medications. They're often sold in pharmacies, but sometimes if you ask nicely,
pharmacists may just give you one for free. They're mostly used to give medication to infants,
although other types of syringes can be used. Different brands of syringes are used for
different types of medication. They'll often have different size openings, so if you have several
with different sizes, you can potentially make tips of varying diameters for your extruder
and interchange them as needed. If you have a syringe that's been used for medication,
wash it thoroughly before you begin using it for incense making. Now to utilize this tip for
incense making, you'll need to remove it from the body of the syringe. A sharp knife is usually
enough to handle this task, but be careful that you don't cut yourself. It's easy to do if you
don't have a vise or another safe way to hold the syringe, but if your knife is sharp, you'll be
able to cut through it pretty quickly. I've even used a hacksaw blade for this task. You want to
cut the tip right where the tube opens to full size. You can see that this one's been cut almost
flush with the tapered surface. Leaving a lip bigger than just a few millimeters might stop
the plunger from traveling its full length, so leave as small a lip as you possibly can.
Now with the tip cut off the tube, you can now insert it into your extruder.
To do this, select one of the dies that came with your clay gun to secure that tip.
Select the die with the smallest round hole that allows the tip to extend completely through.
Too large of a hole can lead to leakage during use, but if the hole is too small, the tip may
not fit down far enough, and again it might limit the amount of travel that the plunger has.
Now although these extruders are easy to use, there is a bit of a technique to get the best
performance from them. One thing you'll notice right away is that some incense dough is rather
difficult to extrude. One of the easy ways to improve your dough for extruding is to add extra
liquid to the blend or even add a few drops of essential oil to act as a lubricant. Remember
that's going to impact the scent. Now adding additional liquids is a little tricky. If you
add too much, it'll make the incense runny and it won't hold its shape, so you have to strike a
balance between easy extruding and maintaining the quality of your incense. Even if you add
liquid or oil to make extruding easier, many blends still require a fair amount of pressure
to force the dough through the tip. There are a couple of different ways to improve this,
but in a few moments I'll show you an alternative that requires virtually no hand strength.
One way that many folks have addressed the need for more pressure on their extruder is to insert
the loaded extruder into an ordinary caulking gun. These are inexpensive and they're available
at any hardware store. In fact, some years ago I built a large extruder into a caulking gun.
I used electrical conduit for the tube and I used a conduit connector down at the tip
so that cake decorating tips could be inserted into the connector to make incense of
different thicknesses, different diameters, and even a variety of shapes.
If you want to invest a bit more money, $60 to $75, you can purchase a professional clay gun
that looks almost identical to a caulking gun. These have much larger tubes than my caulking
gun extruder did and they're designed for clay, so they're really durable and capable of handling
the stiff dough that's used for incense making. Most of these professional clay guns have tapered
tips that are available for them, although you might get acceptable results without the need
for a tapered tip on one of these because the dyes that are used are significantly thicker than
the really thin metal ones that come with the syringe style extruders that we're making.
If you want an extruder that doesn't require hand strength but you aren't quite ready to
invest $75 or if you just don't want to depend on hand strength at all, there is a middle path.
Now this extruder has a plunger that's driven down through the tube with a screw that's attached to
small handle. This type of extruder is a little more difficult to control than the syringe style.
It does take a lot of turning to extrude sticks, but virtually no hand strength is required. I only
spent about $40 for this one. One issue you might encounter with any extruder is the problem of air
pockets. When you load incense dough into your extruder, air pockets are often trapped inside.
Now as a result, when you extrude incense, if you hit one of those air pockets, the air will burp
out and it breaks the stick that you're extruding. Once that happens, there really isn't much you can
do aside from returning that dough back to the extruder and starting that jaw stick over again.
You can minimize this problem by poking your extruder after each stick is done. The easiest
way I found to do this is to use a wooden skewer. Bamboo skewers are available in most grocery
stores. I sometimes cut them down to make masala sticks. If the tip of your extruder is large
enough, you can just insert the sharp end of the skewer through the tapered tip and up into the
tube of the extruder. Now the skewer is going to puncture most of those air pockets, so when you
push the plunger again, the air pockets will collapse and the air will come out before the
incense dough. If the tip is too small for a skewer, you can split the skewer with a sharp knife,
but you also might try using a toothpick, although most aren't going to be long enough
to puncture all of the air pockets. It'll still help a great deal. Once you've constructed your
extruder, you're going to wonder how you ever made jaw sticks without one, but even so, there are a
few other items that will make extruding even easier. Within a few days of making my first
extruder, I made my first drying board. If you're making hundreds of jaw sticks at once, you can use
a drying board that just has a raised lip and is flat. That'll allow you to roll the mass of sticks
back and forth for even drying. But if you're an artisan or home incense maker, you might get
better results with this style of a drying board. You can see that there are wooden strips attached
to the board. These allow you to extrude sticks directly onto the board while keeping the sticks
nice and straight. To make this type of drying board, I just use those same bamboo skewers that
I use for other incense making projects, and I glue them in straight lines that are evenly spaced on
the board. You can see that this drying board has gaps in the strips. Those are used to cut the
sticks while they're still wet. It's a great way to make sticks of a consistent length, but be sure
that you use a really sharp knife to avoid distorting the shapes of the stick. Now, if you
want longer sticks, you just don't cut them. I like to keep my extruder several inches above the board
so that the incense is always under a little tension from gravity. This tends to produce
straighter sticks. Now, if you move the extruder too quickly, you can stretch or break the stick.
If you move the extruder too slowly, the stick can bunch up. Now, although those kinds of sticks
should still burn fine, it's easier to store and use just sticks that are straight and consistent
in size. If one should bunch up, you can straighten and stretch the incense back into the proper shape.
I like to use this small clay working tool, but even a simple craft stick can be used.
Avoid using anything with a sharp edge, though. A knife tends to cut or break the stick.
Once the sticks are extruded onto the drying board, you can turn them as needed for even drying.
I like to use unpainted bare wood drying boards because the wood will absorb some of the moisture
on the back side. Still, you are going to need to occasionally turn the sticks to ensure even drying.
If the sticks dry unevenly, they'll warp. Just as with other forms of incense, the color of the
sticks will lighten as they dry. Joss sticks dry faster than any other form of self-combusting
incense, but you still don't want to rush the process. Slow drying is important if you want
your incense to maintain its shape. Now, you can also use your incense extruder to make incense
spirals or coils. Just use a plain drying board without a lip or any wooden strips for making
these spirals. Simply move the extruder in a spiral path while pressing out the incense.
Although your incense may not come out perfectly spaced and shaped,
as long as the arms of the spiral are a few millimeters apart, it should burn just fine.
Those less than perfect spirals burn just as well as the perfect ones,
but they get to maintain a unique character.
Now, any extruder we've talked about today should come apart completely for cleaning.
Now, if you should happen to forget to clean your extruder and incense dries inside of it,
you may not be able to disassemble it anymore. But just soak the extruder in some warm water
for half an hour to an hour, and you should be able to open it up. Once it's open, soak it
overnight in water with just a drop or two of mild dish soap in it. Then in the morning,
you can easily clean and rinse it out. I like to use a wet paper towel or a cloth to clean
inside of the tube. Just stuff a wet paper towel into one end and push it through to the other end,
and that cleans off any tiny particles that might not want to rinse off the inside of the tube.
Be sure you allow it to dry completely before you reassemble it.
If you have a bottle brush, those work great for cleaning extruders too.
Are you ready to make an extruder yet? They really are simple to make,
and they're simple to use. They really do help create incense that burns easier and
offers the purest smoke possible from self-combusting incense.
Now, I didn't go through the steps to make the large caulking gun extruder in this video,
but if viewers are interested in that, please let me know, and I'll definitely make that the
topic of a future episode of Incense Magic. Well, that's all the time we have for in this episode,
but if you've enjoyed this look at incense extruders, I hope you'll subscribe to my
YouTube channel and that you'll visit my websites. In the next edition of Incense Magic, we'll delve
into the liquid side of incense making as we look at using wine, tea, coffee, and other liquids for
incense making. I hope you'll join me. Until next time, bright blessings.
