Brunelleschi, Dome of the Cathedral of Florence.

Travel & Explore
223 followers
We're in Florence, and we're standing outside of the Duomo.
The Cathedral of Florence.
And we're looking up at Brunelleschi's dome.
It's huge.
Until St. Peter's, it was the highest dome
that had ever been raised.
And in its width, it was as wide as the Pantheon.
Almost.
If you think about the Duomo itself,
it had been planned in the 14th century.
The plan was to build a dome that
had a span nearly equal to that of the Pantheon.
And of course, the Pantheon had been built in the ancient world,
and that technology had largely been lost.
So first and foremost, what Brunelleschi did
was an amazing engineering achievement.
The challenge was how to build a dome this wide
without wooden centering.
Generally, when you build an archway,
and the dome is really just an arch in the round,
you put up a wooden framework.
So this is the wood to actually support the dome
until it can be locked in place by the keystone.
Exactly.
So you don't even really need mortar
to hold it together because you've got the keystone.
The problem is this was so big, they couldn't actually
get enough lumber, and lumber that was strong enough
to hold the thing up until they could lock it in place.
And so there was no way to do wooden scaffolding or centering
to hold it up as it was being built.
So how do you build this dome that inclines inward and not
have it fall down?
There's two problems.
You've got that issue, and then you've
got the problem of it wanting to splay outward.
A dome exerts pressure not only down, but down and out.
And so one of the biggest challenges
is how to raise the dome and deal
with that downward and outward pressure,
not cracking the walls underneath.
Now, in the Asian world, for the Pantheon, for example,
they had dealt with that by just creating sheer bulk.
In other words, the walls got to be 10 feet thick.
I think actually in the Pantheon,
there's something like 20 feet thick of concrete.
But Brunelleschi couldn't do that here.
So what he's done instead is, first of all,
he made the decision to make the dome as light as possible.
And that means that it's basically hollow.
It's a double shell.
And within the shell is a staircase
that snakes around that allows one actually to get to the top.
And if you look, you can see people just below the lantern
up at the top of the dome taking in the view of the city.
He also created ribs.
You're doing a lot of the weight bearing.
And then in between each of the major ribs,
which are visible on the outside,
there are two within that we can't see.
And those are actually locked in place
by a series of horizontals as well.
So there's this whole skeletal structure that's actually
holding this piece together.
I think most importantly, he was able to develop a system
where, as the dome was being raised up,
as each course of stone and brick was added,
it was actually locking itself in place.
And so it was self-sustaining.
Another way that Brunelleschi dealt
with the downward and outward thrust
was to create chains inside the dome made out
of stone and wood locked together with iron,
like a girdle to hold the dome in
and to counter that downward and outward thrust.
You might think of an old-fashioned wooden barrel
that has a couple of iron rings around it
to help keep the wood together.
Brunelleschi created cantilevered scaffolding.
That could rise as the building went up.
And so the workmen had a place to work.
Brunelleschi also built new kinds of pulleys and hoists
to bring up these heavy, massive pieces of stone
to the top of the dome.
So he created this ox hoist, just these remarkable machines
that no one had ever seen before.
He actually even designed a special barge
to go down the Arno to be able to bring the materials
to the city itself.
If you think about the sheer quantity of material
that had to be imported and had to be hoisted up
and had to be put in place, it is just this remarkable project.
Bricks that had to be created, stone that had to be quarried
and brought here, platforms for the workmen
to work on, machines to hoist everything.
And I think it was Alberti who said something like,
what Brunelleschi did, we did without having
any example to lean on.
Utter invention.
Now, we think that Brunelleschi may have gone to Rome
and may have studied ancient architecture as well
as sculpture there.
But there is no precedent in the ancient world
even for what Brunelleschi accomplished here.
Now, it's important to say that the dome is not
hemispherical like the dome on the Pantheon.
It's actually kind of tall.
Right, it's kind of pointed.
In a way, it has more of a Gothic shape
than a classical shape.
But in that way, it matches the Gothic church itself.
If you look closely, you can see these exedrae or blind tribunes
that Brunelleschi added around the outside of the dome.
They actually look very classical
compared to the Gothic church.
They, in fact, look like Roman triumphal arches.
So there's this curious classical moment here
in an otherwise very Gothic church.
And it's a church that is not only Gothic,
but really referring back to the Tuscan Romanesque tradition,
especially in terms of the polychromy, the colored
marbles, which Brunelleschi also carries up into the barrel
just below the dome itself.
But ultimately, you've got Brunelleschi,
who, through his engineering genius,
is solving a problem the Western tradition had never
been capable of solving before.
How does one span this enormous space?
And in order to do it, he's surpassing the ancients
that he's even here paying reverence to.
