Cinematic Lighting 101 | How to Light Black and White

Studio Solution
24 followers
What is up guys, Nairs here from The A-Team. Today we are here at the ProBlood Visuals Clubhouse.
If you don't know what that is, we will leave a link in the description below and we're going
to be walking through how to film and light for black and white. Let's go! Sweet, so today we're
here on set with my friend Justin Jones. Justin Jones is a cinematographer who has shot for Trippy
Red, Anderson .Paak, Diplo. Justin, when it comes to lighting for black and white, there are a few
challenges because a lot of what we know goes out the window. Tell us some of your tips for lighting
for black and white. Cool, so I have four tips for shooting black and white. First is going to be
don't worry about color temperature. It's going to be black and white, so that doesn't matter.
Number two is going to be quality of light. Hard light, soft light, or a mix of both. Three is going
to be texture, adding textures and creating shadows. And four is going to be intensity,
creating a bright spot in the frame to draw the eye. Awesome, let's go to set and check out some
of these setups. Awesome, so we're here on set now with our first scene. Justin, what is the scene
and how did you light it? Cool, so it's a very dramatic scene. Basically it can be anything out
of any horror film. First thing I was thinking about, quality of light. I chose hard light
because it's a dramatic scene. I wanted to increase the contrast and give us more shadows.
The next thing I did is I wanted to draw the eye to our actress and to the knife. So I made that
the brightest part of our scene. Awesome, so walk us through light by light how you lit every part
of this. Great, so I put two 300Ds and a 120D outside to create moonlight. I walked those back
quite a ways just to sharpen our shadows. Second thing I did was I added smoke to the scene to kind
of see those shafts of light. And because I walked the lights so far back, it was able to give me a
really sharp kind of beam of light. The last thing we did is, well actually I didn't do it,
Ted did it, is cut down a branch from Shane's backyard. We put them on C-stands to kind of
give our light a little bit of texture and a little bit of movement in the background.
Awesome, let's go check out that footage now. Awesome, so we're here at our next setup. Justin,
you went a little softer with this lighting. Tell us about the scene and how you lit it. Sure,
so in this scene we were concentrated more on beauty, so we went for a softer look.
But the same rules still apply when shooting in black and white. The first thing we did or didn't
do is worry about color temperature. We had tungsten practicals and a daylight key, but once
again it's black and white. Second thing we did is use softer sources. It helps get a beauty look
and really helps hide blemishes and stuff like that. The third thing we did is we used the
intensity of the light to draw our eye to our actress, and we also used the leading line of
the practicals to pull the two actors together. Fourth thing we did, the image was looking a
flag that kind of just stopped down our background and kind of separated the talent from the
background and the wall. Super cool, so take us through light by light how you lit the scene.
Cool, so for the first thing we did is we used the 120d with a softbox as her key,
made it really soft and kind of flat and frontal on her face. The second thing we did is we added
another 120d with a mini light dome as her backlight. That kind of kept it a little soft
but still gave us a rim. Third thing we did is we used two 300ds on the patio just kind of coming
in as moonlight. We had them dialed way down but they could have been 120ds but that was what we
had at the time. And the fourth thing we did is turned on practicals over the pool table and that
just allowed us to bring up the ambience in the room and light the pool table. And I also noticed
that you enhanced the practical lighting a little bit. What did you do to the practicals? Sure, so
the practicals when we first turned them on were extremely bright. So the first thing we did is we
changed the bulbs out for dimmer bulbs. Then we used ND and diffusion to kind of soften them a
little bit and take the intensity down a little bit more so we could open up that iris and kind of
blur our background. Awesome, let's go check out that footage. Today's episode of 4 Minute Film
School with Justin Jones. Justin, walk us through your four tips for lighting black and white one
more time. Sure, so first is going to be color temperature. Since we're shooting black and white
it doesn't really matter so use what you have. Second is going to be quality of light. Use hard
and soft light to your advantage here because you don't have color so it becomes a lot more
important. Third is going to be intensity. Make sure you make what's most important in the scene
brighter than the rest. It'll help draw the eye. And fourth is going to be using shadow to kind of
cut light and make sure the light falls where you want it. Awesome. If you like this episode make
sure to follow Justin Jones at JustinJonesDP. Follow Aputure on Facebook, Instagram, the works.
We want to give a huge shout out to the Hurlbut Visuals team for letting us shoot at the clubhouse.
For those of you who don't know, they shoot all of Shane's Inner Circle's educational content here.
We'll leave a link in the description below. Also leave a comment below. With the next educational
video you want to see us make next we're going to be picking the best comment and giving them an M9.
I'm Nerris from the A-Team. We'll catch you guys next time.
