PRO ICE HOCKEY STICKS | How It's Made

Process A-Z
9 followers
3 Video Views·Oct 8, 2024
The blade starts with a plastic core.
In the centre, there's a piece of hard foam wrapped in graphite.
It absorbs the impact of the puck.
Later, the core will be permanently moulded to the shaft,
but for now, they're just glued and clamped together.
When the glue has dried, the core is covered in a graphite sock.
The sock's fibres run diagonally.
The fibres of subsequent layers run in other directions,
building a combination of crisscrossed fibres.
That creates uniform stiffness throughout the blade.
Now the core goes into a glue applicator.
This heat-activated plastic resin permeates the graphite.
Once it cures, it'll fortify the material.
On the next two layers of graphite are strips.
On one, the fibres run vertically.
On the other, they run diagonally.
They're stiffer because they've already had a resin application.
They're then glued onto the core.
This is how the factory builds its graphite blades,
whether mass-producing amateur sticks
or making a few special order sticks for a professional player.
At this point, retail sticks head into large-scale automated production.
The professional sticks continue to be made by hand.
Initially, they produce a customised wooden mould for each player's stick,
and it's given an identification number to prevent mix-ups.
This two-piece mould is installed on a press.
This press shapes the blade to the player's precise specifications
for the face, or vertical angle, and the curve.
This moulding process also compresses the graphite layers into a single unit
and permanently bonds the blade to the shaft.
The plastic bag over the blade prevents excess resin from oozing all over the press.
With a router, the blade is profiled to a specific shape.
Each player orders his own personal template.
It can be any shape as long as it abides by the Hockey League's regulations.
Maximum curve, 19 millimetres.
Maximum height, 7.6 centimetres.
Maximum length, 30 centimetres.
Now the blade gets a good sanding and a thorough buffing.
The blades are dipped in urethane,
a colourless coating that fills any tiny imperfections on the surface.
Once that dries, the machines spray silver paint at the base of the shaft.
Finally, another coat of urethane to seal and protect the paint.
For the retail market, this company mass-produces six models of graphite hockey sticks
in a right-handed and left-handed version.
