Common U.S. Army & Marine Infantry flak vests used during the Vietnam War
26 Video Views·Oct 8, 2024
Corpsman up! Bruce is hit!
Bruce! Bruce! You alright man? You good?
I think I'm okay. I think...
Dude, it looks like your flax took the brunt of it, brother.
My flax saved my life.
What's going on guys? It's Prince031. Got my good buddy Bruce at Camp Armament.
Be sure to check out his channel and subscribe.
So, we're kind of picking up on where we left off with the Marine and Army
common infantry gear used in the entirety of the Vietnam War.
If you saw our gear video, it was a very vast video.
We covered a lot of gear, a lot of equipment, even uniforms.
And we didn't have time to really sit there and go in detail
over every little specific thing we had so much to cover.
So, we thought we'd do a little follow-up video.
This one over body armor in particular.
So, the commonly most used body armor for individual infantrymen
in both the Marine Corps and the Army.
And I'll be covering the Marine Corps since I am a Marine myself.
And Bruce is going to be going over the Army.
And I think what you guys will see if you start dabbling into
pictures from the Vietnam era and video,
you'll notice that Marines, infantrymen as a whole,
for the most part, commonly wore their flak vest.
Whereas the Army, you see kind of the opposite.
More so not wearing their flak vest.
Bruce, can you speak to that at all?
Oh, yeah. That's absolutely correct.
It just came down to unit SOP.
Typically, Marines were told to wear them and they wore them.
And those in the Army, it was left up to the individual units.
So, most of the time, unless they're inside base or inside vehicles,
if they're out patrolling out in the field, they chose not to wear them.
Good deal.
So, in this video, we're going to go through all the Marine Corps flaks
and then we're going to go through the Army flaks,
at least the most common ones that you've seen.
So, thanks for watching, guys.
Don't forget to leave a comment.
All right, guys.
So, the first flak that we're going to start off with, and again,
these are the most commonly used infantry flaks of the Vietnam War.
So, the first one we're going to start off with is the M1952 Marine flak.
And this is not to be confused with the M52A that the Army utilized
that Bruce is going to be talking about later.
But just to backtrack a little bit,
flak vests started to come into play in the late Korean War.
Pretty much, they conducted studies.
You've got to remember, Korea happened not too long after World War II,
so there were significant studies about, you know,
combat and battlefield effects and whatnot,
and they found that about 70% of casualties were induced by fragmentation.
So, that's when flak jackets as a whole started to kind of be looked at,
whereas we're going to start issuing these out en masse to infantrymen,
whereas before, you know, it was restricted to, you know,
like bomber pilots and stuff like that.
So, the Korean War is where we really started seeing the mass issue
of flak jackets to individual infantrymen, and that started with the M51.
Shortly after that, you've got the M52 variant,
and we're going to be talking about different patterns of flak vests
as we're going through these.
But the M52 had its own series of patterns,
and this one right here, I believe, is a third pattern vest.
But you'll notice that these later M1955 pattern vests are kind of modeled off this one.
It's pretty much the same for all Marine vests.
They consist of ballistic plates that wrap around the vest.
I've seen a reference to aluminum plates being used in the M1952,
but the one I have are Doron, which is like a high-strength fiberglass.
You also have a ballistic nylon material that helps form the vest.
It's all contained together by a nylon carrier.
Now, you'll notice that the Army kind of takes a different approach with their vests later on.
My understanding of this, and there's not all that much information out there,
but my understanding of this is the Doron plates were better for, you know,
being exposed to water and everything else.
Marines, essentially, are naval infantry.
So, obviously, we do a lot of ship-to-shore operations and movements.
Marines get wet.
That's just the nature of the beast.
That's why we're Marines.
So, again, we're naval infantry.
So the Marine Corps, when they were looking at flak vests to adopt,
they noticed that the Army ones were a little bit more susceptible to water exposure.
And my understanding is that these Doron plate-style vests were better for water-type operations.
So you'll see Marines and the Navy utilizing these style vests all the way into the 1980s.
But, again, this is the M52.
And I'm going to open this up so you guys can check it out inside.
But you can see these Doron plates going all the way around the waist and in the chest area.
And then it had a zipper closure, although my zipper is pretty much deteriorated.
And then it buttoned up.
And then at the bottom here you had this canvas material that facilitated the hanging of M1910 hanging-style gear.
And what I'm talking about like that is stuff like this,
like your canteens and your jungle first aid kits as well as bayonets.
You can see that they have these M1910 hangers.
So you could attach those directly to the flak.
You didn't have to have a cartridge belt or a pistol belt such as this to facilitate carrying that type of gear.
I also want to mention you'll see in early photos of Marines when they first got to Vietnam,
you might see them wearing this torso-type flak underwear.
And, obviously, for obvious reasons, you don't really see very many Marines wearing these
because, obviously, it's cumbersome.
Who wants to go to patrol with a freaking flak diaper on?
But you will see Marines in the early years coming off the bird,
maybe coming off the ship or whatnot that are wearing these ballistic underwear.
Where these really came into play were air crewmen in helicopters and stuff.
They're getting shot at from underneath,
so a lot of those guys would wear these ballistic lower torso protectors.
The first M1955 flak we're going to talk about today is what was referred to as the first pattern vest.
So right off the bat, you may have noticed that this vest is a different color than the M1952.
M52s had a darker forest green color,
whereas these have that olive green color that is typical of Vietnam-era gear.
You'll notice that this vest here has a rope sewn from the front,
and it goes all the way around to the back side.
And what that was used for is guys, when they're on the move and they got their rifle slung,
that rope will trap that parade sling in there so that it won't slide off the shoulder very easily.
So that rope was on there, and that rope was only on the right shoulder.
So we'll talk about another flak here in a little bit that incorporates two ropes,
but this one is only on the right shoulder.
The shoulder cord, or shooter's cord,
could also assist with helping to keep the buttstock firmly in the pocket of your shoulder to assist with shooting.
You'll also notice that it's flat here and bare.
There's no pockets.
The only pocket you have is the same one that's on the M1952 vest,
and that's to accommodate something like a notepad.
Guys might have even stuck cigarettes in there,
and it'll also fit a 20-round M16 magazine.
But it's also important to note that at the time when this flak was widely used in the early years of the war,
the M16 wasn't widely issued to Marines.
So it was more so probably designed for notebooks or cigarette packs, whatever the case might be.
We also have the addition of a collar around the neck.
Although it's not a very large collar like the Army vest that we're going to look at later,
it was added to give some protection to the neck.
You'll notice on the M1952, it does not have that feature.
But we retain a lot of the same features from that original M1952 vest.
You'll notice that it's got Doron plates in here.
I believe it's 23 Doron plates for the medium,
and the flak itself weighs about 10.3 pounds for the medium vest.
So, you know, it's a significant, significant weight.
But definitely, it's a step up from the original vest.
You also retain the webbing along the bottom that has the M1910 hangers for gear.
And outside of that, guys, that's pretty much it.
It's pretty much the same vest, just the addition of a collar and the rope and the color change.
All right, guys, so moving on from the first pattern, M1955, we're going to look at the second pattern, M1955.
So the biggest things that kind of jump out at you are these big, giant nylon pockets that are added to the front.
We also got a flak hanger back here in the rear.
And outside of that, guys, it's the exact same vest.
And you still got the Doron plates, the ballistic nylon.
You got the shoulder rope here on the right shoulder only.
And that's it, guys.
Not much change from the first pattern, second pattern, you know, with the addition of the pockets.
All right, guys, so now we're going to talk about our last Marine vest.
That is the third pattern, M1955 flak vest.
So there's some noticeable differences between these vests.
Now, one thing I want to mention, guys, is just because it's the third pattern doesn't mean this is, like, the last iteration of Marine flak vests that went on into the 1980s.
From what I have seen, these were made concurrently with the second patterns.
And they pretty much stopped at some point during the Vietnam War.
And then, you know, they just fade away.
So the only story that I could seem to see or find about these vests was that they were damaged vests sent to Okinawa where they were pretty much refitted and sent back to theater.
Obviously, with numerous Marines in-country in Vietnam, there's a heavy demand for the M55 style vests.
So a lot of those vests that were damaged in, you know, whatever conditions were sent to Okinawa, regeared, refitted, outfitted, and then sent back in this configuration.
And from my understanding, that's what these third pattern vests are.
So let's get to talking about what the differences are.
So starting out, you'll notice that this material here is a nylon material, whereas in these other pattern vests was a cotton material.
So that's the number one big noticeable difference that you see right off the bat, different material carriers.
You'll also see the addition of two ropes on each side.
So whereas the other vests only have one on the right shoulder, you have two ropes on both the right and left.
Moving towards the collar here, you'll notice that you have these two eyelets, and then it has like a 550 cord going through them for the hanger, whereas opposed to you just have the sewn-in piece of webbing here.
So that's another difference.
Going down to the pockets here, you have exposed buttons, which, you know, when you have exposed buttons, you obviously risk them getting ripped off.
So this one actually got ripped off.
But you had exposed buttons.
You also had a square pocket flap as opposed to this style right here.
But you do retain the whole M1910 hangers, also buttons with a zipper.
But inside the vest, it's the same thing, guys, that ballistic nylon with your standard door on plates.
There's the back.
And again, same M1955 style.
This has a few different features with the third pattern vest.
Now, again, after the Vietnam War, these vests went on in production all the way into the 80s.
You still had Marines wearing them.
And pretty much what you see are the second pattern M1955 vests.
Again, I think these were only refits.
I could be wrong.
I'm not a subject matter expert on this.
But based on the limited information that I was able to find, that's something I saw about the third pattern vest.
That pretty much wraps up the Marine Corps vests that were used by your typical infantrymen in Vietnam for the Marine Corps.
All right.
So one last thing before I turn it over to Bruce to talk about the Army flax.
So it was not uncommon to see a sprinkle of Army flax mixed into a Marine infantry squad, platoon, company.
And that is because the Vietnam War was a very manned, equipment, uniformed, demanding war.
So Marines sometimes got their gear and equipment from already existing Army supply depots in country.
So that was not an uncommon thing.
But it was far more prevalent to see Marines outfitted with M55 flax than the onesies and twosies of the Army flax.
Okay.
Let's look at the U.S. Army ballistic vests that were used during the Vietnam War.
Just like with the Marines, they started out with a Korean era vest.
But it was quite different from the Marine vest.
You'll notice, first of all, that it's a solid brown color.
This will tell you that it is a 1952A model.
This was the most common vest used by the Army in the beginning of the Vietnam War up until and after 1966.
You'll notice that it's fully nylon and it's got no hard plates.
This is soft armor all the way around.
We have side laces and the armor will overlap to protect the side, not leave an open spot there.
We have drain holes in the bottom.
These little eyelets will allow water to drain if this thing fills up with water.
We've got epaulets on each shoulder, but no collar.
This is one of the things that made it really popular.
And you see vehicle crews or crews, anyone that was wearing a helmet with earpieces,
they liked these without the collar because it didn't interfere with their helmet.
All Army vests have these little bits of webbing on the front hangers so you can hang items.
Sometimes you'll see like someone with a grenade hanging from there or maybe a pouch.
You can stick a pin in there or whatever.
And all Army vests had double pockets on the front and they were all basically this same shape and design.
Zipper closure on the front.
Armor would overlap.
And then a button front also.
But yeah, this is the 1952A and would soon be replaced.
Well, let's look at our next set of armor.
Okay, so the second vest that was commonly used by the U.S. Army during the Vietnam War
was the introduction of the three-quarter collar vest.
And this is the kind of stereotypical vest that we think of when we think of Army guys wearing armor during Vietnam.
This is essentially what it looked like with the exception that visibly it would have had epaulets on the shoulders.
That vest was made for only about six months and it was known by the contract code on the tag as the 823.
It'll be marked 823 on the contract code of the tag.
They're fairly rare.
They were fairly rare then because they were only around for about six months.
But there's a lot that they bring to the table that will kind of build upon as subsequent vests are adopted.
Side laces.
Double pockets.
Zippered front.
Still got your hangers.
Three-quarter collar as opposed to the vest that it replaced, the 1952A, that had no collar at all.
But just like this 1952A has epaulets, it would have had epaulets on the shoulder.
The fully soft armor vest.
Again, it was only around for about six months before they introduced this vest.
Okay, so the second series vest and the three-quarter collar vest would be denoted by its new contract number, which was 122.
If you look here, you'll see 122.
This had replaced the previous vest that had the epaulets.
And if you'll notice, this vest has no epaulets.
They've been removed.
Still got your three-quarter collar.
Other than that, it looks the same as the previous version, except there was one big difference.
One thing that they noticed was that in the previous version, the armor would sometimes shift around inside the carrier itself and get bunched up.
So they added stiffeners, ballistic stiffeners, inside that armor to help it keep its shape and not slack down and get bunched up.
That's what that 122 denotes.
All that came about in late 1968.
And by 1969, these were the vests that we were seeing that were standard issue.
Things to note, everything else is the same.
We've still got the zipper front, double pockets, still got our grenade hangers, three-quarter collar vest.
The only difference was the change in the contract code because we added the stiffeners inside the vest.
Let's look at the last version of the flak vest used in Vietnam by the Army.
At least by your standard combat infantryman that was issued on any large scale at all.
And that's going to be the M69.
Again, it looks almost just like the previous three-quarter vest.
There was a couple of major differences, though.
One is they added Velcro to the front and got rid of completely the zipper.
The idea was that the zipper could get damaged through shrapnel and the vest may be hard to get off while the medics were trying to work on the patient.
So they just added a Velcro closure on the front instead.
You can see that it's marked M69 here.
This was contracted in 69.
They started being issued around 1970.
So this is going to be a late war vest.
It kept the exact same 122 contract number.
So that did not change.
You can see it marked there.
Just like the previous vest, everything else is the same.
Nylon, soft armor, drain holes on the bottom.
Three-quarter collar vest.
Got the same dual pockets up front.
Got the same grenade hangers on the front.
The only big difference being the addition of this Velcro closure.
Okay, guys.
That'll wrap up the four primary body armor vests used by the Army during the Vietnam War.
Well, that's it, guys.
That concludes this video over the most commonly used infantry flak vests for both the United States Army and the United States Marine Corps during the Vietnam War.
If you're liking what you're seeing, don't forget to check out my channel.
Also, go over to Bruce's channel at bruceatcamparment.
We've done several Vietnam-oriented videos.
And this is something that we're both heavily interested in.
We both collect gear and equipment and read continuously about the entirety of the war.
So you got anything to throw in, man?
That's true.
I've learned so much about Vietnam.
My whole perception has changed just in the last couple of years when I stepped back off into this again.
And I would just say I know we've got some veterans that are watching.
And you don't always post below, but for those of you that are viewing, welcome home.
You don't get told that enough.
We appreciate what you've done.
Yes, 100% agree.
Those guys did not get the same reception that I got coming home from Iraq and Afghanistan.
So thank you, guys.
And we'd love to read your comments below for what units you were in and when you served.
So thanks for watching, guys.
Don't forget to leave a comment.
Man, you good? You good?
I think so.
I think I'm all right.
I think I'm okay.
I think your flak took the brunt of it, bud.
My flak saved my life.
Is that going to work?
I don't know.
Let's try again.
Okay, I've got to get dirty again.
Bruce! Bruce! You good, man? You good?
Don't touch me, you idiot!

