The most INTENSE Home Automations built with Google!

Smart Home Devices
120 followers
I went through hundreds of automations
that I've created over the years
and I picked my top favorites that I use every day.
But can I set up all these
without any kind of smart home hub?
It will be challenging because I'm only gonna be using
the Google Smart Home system with no hub to help me out.
Let's see how much I can do.
So I'm gonna start off with the most simple automation
and then every automation
is just gonna get a little bit more advanced.
So starting off with the first one being the most simple,
but one, honestly, I don't think I could live without.
Automating my porch lights to automatically turn on
at sunset and then turn off in the middle of the night.
I do not need a hub for this
and it's really easy to set up
using a basic Google home routine.
The only thing you'll need is a smart light switch
and you can use a wifi one so you don't need a hub.
Kasa makes a really good one.
So you can just use that to automate your porch lights.
Like I said, we're starting off really easy.
So let's turn it up a notch.
Here in the studio, I'm using Millimeter Wave
because it's perfect for turning off the lights
at the right time,
since it can detect the slightest little movements
and it only turns off the lights if no one's in the room,
which makes it difficult when I'm trying to hide for my kids.
Dad, I know you're in there.
But the problem with Millimeter Wave
is that they're expensive and sometimes require a hub
like the sensor I'm using in here.
So I bought a TreatLife Millimeter Wave sensor
and it's a fraction of the cost of the others
and you don't even need a hub to use it.
It connects directly to Google Home and it works great.
So this is a robot vacuum
and I try to have it clean as much as possible.
So I set up an automation
to just clean the kitchen late at night.
I'm using Roborock and you need to use the app
to define where the kitchen is,
but you do not need a hub for this automation to work.
You can just set up a basic Google routine
and then use a custom action
to have the robot vacuum clean the kitchen.
So far, these are super easy.
I mean, who even needs a hub, right?
So my next favorite automation
is when the backyard lights turn on when these doors open.
And my kids use this every single night
when they go out and play.
Now, I'll admit the sensor that I'm using on this door
does require a hub,
but there is a way to do it without needing a hub.
You would need to use this thread contact sensor
that connects directly with Google using Matter.
Now, these sensors are a little more expensive
than like Zigbee sensors that do the same thing.
So if you're adding a bunch of sensors around your house,
it might be cheaper to get a hub.
But the point is you don't need a hub
for this automation to work
and I set this automation up
in a simple Google Home routine.
Okay, this next automation
is probably in my top five favorite of all time.
Playing or pausing the TV
changes the lights exactly how we like them.
Here's how the automation works.
If the TV is playing, you turn off the lights.
If you pause the TV, the lights turn back on.
And I don't need a hub
or a complicated automation for this to work.
If you're using Google,
you can just use a Chromecast and a basic Google routine.
Having an automation to turn on the lights
when I enter the garage is so helpful.
I can see better, it's safer,
and it just makes me happy with how bright it is.
And best of all,
you do not need a hub for this automation to work.
You could use a contact sensor that uses thread
that I showed earlier on a regular door.
Or if the garage door opens,
I can use the Mera smart garage controller
that connects directly with Google
and trigger the automation.
To control the lights,
I'm using a Kasa smart outlet
that connects directly with Google.
And it was really easy to set up the automation
in the Google Home app.
Didn't even break a sweat.
But I might be sweating right now
because it's really hot in Arizona.
So this is all pretty easy.
So let's get a little more advanced if you can handle it
with another automation here in the garage.
And this automation helps us remember
to close the garage door if we left it open.
For this automation,
this little light turns on whenever a garage door is open.
And I really like this because it's very subtle,
but you can still see it anywhere here in the main room.
Now, this is a Z-Wave device, so it needs a hub.
But luckily I have a lot of Wi-Fi lights
for testing over the years, so it shouldn't be an issue.
But a warning, this automation is tricky
if you have two garage doors.
Say both garage doors are open.
The light will turn on.
But if one garage door closes
and you had a simple automation,
it will turn off the light.
And that is no good
because the other garage door is still open.
So should you just throw in the towel
because you don't have a hub?
No way!
You don't need a hub for this automation.
That's where the Google Script Editor comes in.
And this is great for scenarios like this
because you can have more advanced automations.
So I love getting a good night's sleep.
And this automation is one of my favorites
because it helps me sleep better.
When I walk into the bathroom,
the lights turn on bright from a motion sensor.
But when I need to use the bathroom
in the middle of the night,
only the light strips turn on to a dim brightness.
That way it's not blinding.
But it is bright enough.
I can still wash my hands.
And not bright enough
so I can still easily go back to sleep.
And I don't need a hub for this to work.
I could use a Matter Over Thread motion sensor
that pairs directly with Google
and use some Wi-Fi light strips like Wiz or Kasa.
Okay, this is the most useful automation that I have.
When my phone and Allie's phone leave the house,
our Smart Home goes into away mode.
So the robot vacuum starts,
the thermostats run less,
and all that kind of good stuff.
But there's one really important feature.
And that's the ability to skip away mode.
Like if the babysitter is over.
So can you do this without a hub?
Well, kind of.
You would have to get creative.
Like turn on a specific smart bulb
to a certain color that would skip the away mode
if that was the case.
I'm not gonna count this as working without a hub
because it doesn't really work well.
So it's our first fail of the video.
Now I love a good nap.
So an automation that improves it
will definitely be a favorite.
Normally I have a motion sensor
that opens up the shades or turns on the lights
so we can see better.
But if I'm napping, I don't want that to happen.
So I have a pressure sensor underneath my mattress
that knows if I'm in bed or not.
And it only runs the automation if I'm not in bed.
The problem is the pressure sensor only works with my hub.
There's not a lot of good options for Google Home.
But there might be a way.
So you can use the Aqara FP2 sensor
because this sensor can scan the entire room
and you can divide it into different zones
and knows if someone's in that zone or not.
So you can make a zone for the bed
and it would know if someone's in the bed.
And this sensor would work over the pressure sensor
because you do not need a hub
to connect it directly to Google.
But you would need a Google Script Editor
for some of those advanced automations.
All right, I have some really cool automations
using my doorbell and outdoor camera
and it would take a miracle
to get these automations working without a hub.
So we'll see what I can do.
But first, a quick travel by map.
All right, I'm here in Southern California
and I'm excited to check out Panasonic's solar panels
and battery storage, which are installed on this house.
And you have to see this, it's a crazy setup.
You're looking at a house
that's not even connected to the grid.
80 solar panels, 72 kilowatt hours of battery storage
and a generator backup that will kick on
if the batteries get too low.
See, pretty crazy, right?
So Panasonic's been a leader in this industry for a while.
But what really caught my eye is this hybrid inverter
because it's DC coupled,
which means it's much more efficient
at storing the energy from the solar into the batteries
because it doesn't have to convert it.
So these Evervolt battery storage options are interesting
because they're modular.
So each one of these battery cabinets or stackable batteries
can come in three different sizes.
But what I really like is that you can add more battery packs
after it's been installed.
So you could start off with a smaller battery pack
and then when you realize you need more battery storage,
you could add more after.
I wish I would have had a system like this
because this would have taken all the pressure off
when I was picking out my system.
On top of all that, Panasonic has a really good warranty,
25 years on the solar panels
and 12 years on the battery storage system.
And that's on product and labor.
Nice.
Since Panasonic's been around for so long,
it's much easier to trust their warranty
versus another who might not be around long enough
to honor it.
And this has been so much fun to see in person.
And if you want to find out more,
then check out the links down below.
And thanks to Panasonic for supporting the channel.
So another automation that helps our house run smoothly
is all the lights in the main room.
They turn on bright before dinner
and then they turn down to a dim setting
right before the kids go down to sleep.
And that helps them wind down, or at least it attempts to.
And then the lights turn warm so I'm tired.
And when I go to bed, all the lights turn off.
And this just happens automatically.
I don't have to think about it.
And I do not need a hub to run all these automations.
Or the Google Script Editor,
I can set up everything in the Google Home UI.
But I would need the Google Script Editor
if I wanted to skip these lights changing
if the TV was on or something like that.
All right, this next automation I'm about to show you
is easily in my top five favorites.
When a package is delivered while everyone's away,
we get reminded from our smart home once we come home
to go check the porch for the package.
Check the front porch for a possible package.
And I'm so happy when this automation runs.
And my family is probably sick of hearing me rave about it.
This automation is my crowning achievement,
the thing I'm most proud of.
What about me, Dad?
The automation might seem difficult,
but I can set it up without using a hub.
Here's how it works.
When everyone's away from the house
and the video doorbell detects a package,
then turn these smart lights green.
So when I come home, I can see these green smart lights,
know that there's a package on the door.
And once I open up the front door,
it will turn these lights off or turn them back to normal.
Now packages never get left on the porch again.
You know what's insanely useful?
Person detection on our outdoor cameras for automations.
That's what I'm using for one of my favorites.
When the sun is down and we're playing basketball over here,
the camera can detect us and the person detection
can trigger an automation to turn on the smart floodlights
so we can see while we're playing.
And I'm using a hub for this automation.
And I was like, there is no way this can work without a hub.
So I asked the Google AI if it was possible,
and it is.
I have to use a Nest Cam to trigger the automation
with the person detection.
And you have to use the Google script editor to access that.
But hey, it works.
And the smart floodlights are Nova Stella
and they work with Google.
So yeah, all of this works without a hub.
If you've ever had a one-year-old,
you know your life and your automations
revolve around the baby.
When someone rings the doorbell,
instead of blasting throughout the house
on the smart speakers that someone's at the door,
my automation first checks the baby's door
to see if it's closed.
And if so, it will skip the smart speakers
and only notify our phone
because the baby's probably asleep.
And I can do this without using a hub.
All I need is a Google script editor
and a contact sensor on the baby's door,
and I'm good to go.
I love this automation because I press one switch
and then I know when my shower temperature is ready
and when I should be done showering.
So all I'm using is a timer
and it starts when I turn on the shower lights,
which I usually turn on the same time I start the water.
And once the right amount of time passes
and the water's hot,
the light strips turn green to let me know,
hey, it's time to get in the shower.
So once again, a little bit of time passes
and then the light strips turn orange
to let me know it's time to wrap things up.
And then the light strips turn red
when it's time for me to stop.
This helps me take shorter showers,
wasting less water and time out of my day.
And you do not need a hub for this.
All you need is the Google script editor
because you can set time delays
in between the different actions.
Then you need a smart dimmer switch like Casa
to kick things off and some wifi light strips.
Okay, now I'm really pushing the limits.
I have some smart bulbs in these pendant lights
that can change brightness and colors.
And of course I have them automated
with all the rest of the lights in here.
But what if my family wants to control them
from the light switch?
So I set up a few automations with this smart light switch
that I can change the brightness of the bulbs
or I can even change the colors of the bulbs.
And I can turn off the light bulbs
by just pressing the off button.
And the best part is it doesn't kill power
to the smart light bulb so I can still automate them.
But I look forever for a smart light switch like this
that control the smart bulbs with buttons,
works directly with Google Home
and does not need a hub and it does not exist.
This is one of my favorite automations.
So fail.
If you ask me what my number one favorite automation
of all time is, it's hitting this cabinet
in our theater room and having everything turn on.
I originally set this up as kind of like a joke
because in movies and in TV shows,
they hit things and then just magically they start working.
But we actually use this and it's a lot of fun
to hit a piece of furniture for a productive reason.
But here's the thing though, it uses a vibration sensor
and I could not find one that works with matter
to connect directly with Google without a hub.
So I was super disappointed
that I couldn't get this automation working without a hub.
As you can see, there are some limitations
if you don't use a hub, but I was still able to do a lot
with just a Google Smart Home system.
And I have some really cool automations
that I'm working on that I can't wait to show you.
So hit that subscribe button to not miss those videos.
Thanks for watching.
You can't stay there forever, Dad.
We have to eat.
I need to get him distracted.
