Sailing on the TAG 60 Performance Sailing Catamaran | YACHT REBUILD WEEK 81

Sailing to the World
26 followers
So not a bad day today.
Yeah!
So the anchor is in.
It's a very nice present.
Cool huh?
We took a trip to St Francis Bay and climbed onto the 60 foot tack.
So not a bad day today.
We get to take a close to 2 million dollar yacht
to PE from St Francis.
Rotating mast.
All synthetic rigging.
We're trying to hook up a sail.
We're just motoring since it's a delivery.
We'll just motor most of the way.
This is the El Capitano crew.
Everyone working.
Give you a quick walk around.
We helped Andrew deliver her from St Francis to Port Elizabeth.
Some dive gear. We had to check the props this morning.
Check out some of the rigging that's sitting inside here.
That's insane.
Beautiful layout.
Amazing.
Gotta love life when you've got electric winches baby.
So I've been taking a nap while we've been sailing.
I know it sounds bad but the boats really make me fall asleep.
I think it's because I'm at full relaxation mode.
I sleep so well on a boat.
After all the boat building I think my body is naked.
Look at the dolphinos.
Look at those dolphinos.
Oh yes please.
Oh that's so cool.
Hey buddy.
What a way to end off the day.
Coming into the bay doing 10-11 knots.
SOG.
And check out the sails man.
We've got to trim a bit but we're going to turn now.
So we're motoring now. We're up to 60 knots.
Check out.
That side of the water already.
That side is digging in.
And this side we're slowing down there a little bit.
Check out her lean.
That's awesome.
Let's see what we're doing speed on the ground.
Our trip had come to an end and it was time to install our anchor and our anchor windlass.
It took a whole bloody day.
Now this you'll hook up onto the chain.
Obviously it's going to take a thimble.
And a hook onto there.
And then we'll hook onto the chain.
And that will be probably made a little bit longer than what I like.
But I like it having a nice long throat so that it won't swivel around too much.
But that's pretty much our bridle.
Don't forget to hit subscribe below if you'd like to follow us on the rest of our adventure.
See how it goes off to the side there.
Yeah you want to get that one that goes like this.
I needed to upsize this de-shackle because of the size of this bloody shank.
And that.
And there.
And then we've got to use...
I'll get some locking wire, some stainless steel locking wire to lock these up nicely.
And then from here onto the chain we'll put this one.
Another thing we want to change is these rollers.
Both of them or just those?
We're going to change both of these where these two are running to guided rollers.
And the other side?
The other side is fine. That's our Aqaua spare.
If we do run the spare anchor we'll run it through that setup.
We had these standard rollers on the front which is just...
I don't even know what material this is.
But they're rollers.
You usually find them on boat trailers for the boat to ride on or whatever.
And so we took them and we cut them to size.
Actually this came with Marcus when he built the anchor roller.
But then this one the chain wasn't guiding nicely.
So I got one of these, trimmed off those edges and I made it fit in there.
And that chain's running beautifully now.
Hooked up the anchor to it.
And this is a 45-pound anchor, CTR.
We'll probably change it at a later stage.
But for now there won't be much anchoring in South Africa when we go out of here.
So as we maybe get to Cape Town, if funds allow, we'll get another anchor.
Maybe something with a better holding pattern.
And we've got the bridle.
So that's also something else we've been working on.
So there's our bridle.
It is a long bridle.
That's the bridle we built.
I think there's maybe $25 worth of material in here.
Splice that in with a standard D-shackle.
And then I'll just wire secure these D-shackles on.
Ricky put in this stainless steel plate.
So what it does is protect our deck from getting scratched by our anchor.
So we've got our shackle over there, or our thimble.
A standard D-shackle on.
A nice stainless steel one.
Obviously we need to wire secure it.
And what that means is, you pretty much just put a wire through the eye there.
And then you take it around the D-shackle there.
And what it allows is that this doesn't come loose.
Another option is you can loctite it, but use it out of the water.
Because loctite's not safe for underwater applications.
It's kind of bad for the fishes.
Who taught you that?
My wife taught me that one.
You see, I would have stuck loctite on it one time.
So that's the principle of it.
At a later stage we are going to change this to a proper chain hook.
Because that's the right thing to use these things.
They're pretty strong.
They can load, I think the loading manual on this said about a thousand kilos.
But I trust 2,000 kilos probably not.
So the anchor's in.
And you test it to check if it's set.
Once it's set, hook up the bridle to the chain.
Let the chain out.
And now the bridle takes the load on the chain.
And the extra...
Which means it's got about 40%, I think it's 40% plastic as a bridle.
Take it off.
Take it off, baby.
Take it off.
Heck yeah.
Anchor's on.
So what we've got going on tonight is this over here.
I don't know if you guys remember when I installed this.
If you haven't, check that episode out.
One of the earlier ones used to have an ugly thing.
And this is the reason why I installed this box here.
So you see you've got a hole over there and a hole over there.
And one of them...
So that bracket is going to mount on there.
And it's going to take this VHF.
So that's the purpose of having these ones.
So that you're going to have an outside setup.
And with this I can turn the inside one off and operate purely on this.
That'll go inside there.
When it's not in use, we can close up the box.
Leave it in there.
And that's going to get a lock in there.
And I'm sure someone can break that.
If you want to get in, you're going to get in.
No matter what I do.
So that is the purpose of having that.
And that's why we installed the VHF inside.
But it's because we were going to get one of these.
And that's what it looks like now it's installed.
And our little aux port over there.
So just drill that little hole.
And now we're going to stick this little grommet lock in there.
Just keep that closed.
Check how excited I am man.
I'm like a kid that just got a present.
Well it is a present.
It's a very nice present.
Shit that's nice.
Freaking heck.
Feel the quality on that.
It's like hardcore material.
That's like complete.
It comes with a pump and everything.
That's so freaking nice.
So tell everyone what it is.
So when me and Simone started talking about what toys we were going to get.
One of the things was a paddle board.
And they were just completely out of our budget.
We were not even going to get one.
And a big thank you to Vetus head office for this amazing toy.
And we're going to freaking use the heck out of it.
One thing you can always be guaranteed with Vetus stuff is the qualities of their product.
And that's one thing we've seen before.
You pay for what you get.
Freaking premium quality stuff.
So if you are thinking of getting one.
It comes with a big ass suck board or stand up paddle board.
The fin.
Big pump for it.
Really big pump.
So it's a 2000 cubic centimeter pump.
Nice oar.
Three piece oar.
So really easy and adjustable.
So you can adjust the length of the oar.
That's really nice.
A repair kit that comes in it.
Beach.
And a freaking awesome carry bag.
How nice is that?
I'm so flipping stoked.
We've totally got to go test this thing.
It's so cold in this water.
It's cold but I'll still go test it.
So what have we got?
So we're going to test out our paddle board that Vetus gave us.
And while Ricky's going to test it.
I'm going to warm up in the cold water.
How's it go?
How's that tail?
Beautiful.
We're definitely going to use this board a lot more.
Getting used to it.
This is the first time we get a paddle board.
Or any kind of board for that matter.
It's been good fun.
Oh man.
Just being out here.
That's so amazing.
My paddle boarding skills are terrible.
Definitely figure that one out.
But just being out here.
It's freaking amazing.
Let me give you guys a view of what it looks like.
Check it out.
So so awesome.
Dangling for calling the sharks.
And it's relaxing.
Simone should be somewhere on that pier.
I just don't know exactly where.
Oh there she is.
She's the one in the white t-shirt.
Let's go paddle past her.
See if we can catch some surf in.
Oh shit.
We're going to take a swim.
Thanks so much Vetus.
For letting us explore the ocean.
Freaking awesome.
Stay tuned till next week.
Where we get started on our rigging.
And do final mast prep.
Don't forget to subscribe below.
Give us a thumbs up.
And if you'd like to support our production.
You can do so by clicking on any of the links down below.
Thanks to Aubrey and Maria Martin.
And Lief Machnis in Weijer.
For your generous donation towards Lady Africa.
