Sealing and Cooking In Unglazed Earthenware Pottery

Native American Crafts
28 followers
43 Video Views·Oct 3, 2024
Many people think that earthenware cannot be used for anything but that is not true. In this video I talk about some uses for earthenware, demonstrate two different methods of sealing earthenware and discuss eating out of unglazed pottery. Here I seal pottery using starch and oil, then test my pots to see if they are suitably sealed to stop water from escaping the pottery.
Today I want to talk about how to seal earthenware. I get a lot of questions about how to seal
earthenware, whether or not it can be used for cooking, things like that, and I hope to answer
those for you today. Our ancestors ate and drank out of earthenware for centuries, millennia,
and yet today it's often said that earthenware is not food safe. All that means is that it's
slightly porous. It absorbs what you put into it. If I pour milk in here and I drink milk out of
this glass every day, after a period of maybe a week, it might start to smell like sour milk and
it could potentially harbor bacteria which can make you sick. So they call that not food safe,
and in some ways it is, but you have to understand the limitations of it. You have to also understand
that there's no way to 100% seal earthenware unless you put a glaze on it, and at low temperatures at
which primitive pottery is fired, there's no way you can put a glaze except a lead-based glaze,
and that offers its own health concerns. So the short answer is no, earthenware cannot be sealed
100%, but depending on the clay and depending on how you treat it, it can be sealed 75 or 80%,
and it can be used for cooking and drinking out of as long as you understand the limitation.
So today I'm going to talk about three of the main ways that we can seal earthenware
to make it less porous and more usable for things like cooking and drinking out of, eating on.
So in my research, there's three main ways that earthenware pottery is sealed.
The first way I'm going to talk about is stealing it with starches. So here in the southwest,
the Native Americans would sometimes boil cornmeal or something else with a lot of starch
in the pot. Those starches would get down in the pores of the pottery and help seal that up,
and so pottery that was sealed this way would be much less porous than unsealed pottery. So
that's the first way, starches. The second way I'm going to talk about is sealing it with fats,
and so it was also common sometimes to use something like bear grease or some kind of fat
to rub on the pot and then heat it to encourage those fats to soak into the pottery, sealing
some of those pores, and then you'd rub it on some more and let it soak in and rub it on and
heat it up, you know, and repeatedly as that pot, the surface of the ceramic vessel, becomes full
of fats and oils, it kind of gums up those pores and helps to seal it. There's a few other ways of
sealing pots. Some of them are a little more experimental. There's one that a lot of people
are using called milk sealing, and it actually uses milk, you know, like cow's milk that you
buy from the store. I don't think probably Native Americans in the prehistoric southwest were using
that because they didn't have any domestic animals that produced quantities of milk. We'll talk about
that. I'm hoping to make a video in the future with my friend Motz Merman, who's been doing
some experiments with milk sealing, and hopefully get some more information on that. So today I'm
going to cover the starch sealing and fat sealing, and we're going to do some experiments here. We're
going to try sealing some pots and we're going to try cooking in some pots and just see how
sealed they are. Just to be clear, no method of sealing earthenware is 100%. Moisture is still
going to weep out of the pot. That's just the nature of earthenware, but that doesn't stop you
from using it for a lot of different things. You just have to keep that in mind as you use it.
As I said before, our ancestors used this type of pottery for millennia. It's not unusable just
because it's not glazed. So let me get some pots on this fire and we'll see what we can start doing.
So this is my big shoe pot that I made a couple weeks ago. You might have seen that video. If you
didn't see that video, I'll put the link right over here, so you can check that out if you're
interested. And I went down to the creek and I filled it with water. So I'm just going to throw
in a couple handfuls of cornmeal. I've got that on the fire and it'll start boiling before long.
Now in the video where I made this, I showed that it has a large crack in it.
So this pot specifically is far from sealed, given that it has a crack down the side.
So I'm going to try to see if I can really seal a lot of that crack with these starches.
Now I didn't have access to bear grease and I didn't go buy lard. What I've got here today
is Crisco. So it's something that's commonly available to most people. I know it's not going
to turn rancid and stink like lard or bear grease could. I'm just going to coat the pot
inside and out liberally with this Crisco. And then I'm going to heat it up near the fire.
And then as it soaks in or burns off, I'll add more. This is the third coat of grease for this
particular bowl. The first one, it didn't burn too much. It just pretty much just soaked it up.
And so it wasn't in the fire too long. I pulled it out. I coated it again.
And this time, the second time, it really got hot and it burned like a candle.
Meaning the grease was literally burning out of it. So in between, there's kind of a cool down
period when, you know, it's too hot to touch. Maybe if I had some kind of utensil where I
could apply this grease without burning my hands, I could put it on hot. But as it is,
I got to let it cool a little bit before I add another coat. And it's borderline right now. It's
pretty warm. But it's warm enough that it's melting the Crisco pretty fast and it's running
down and soaking in pretty good. So that's, I think, pretty positive. Because when it becomes
liquid, then it's going to soak into the clay more readily. And you can see the pot is taking on a
rather rustic patina, which, you know, depends on the person, I suppose. But it's kind of
attractive. It certainly makes it look used. Like, you know, pottery back in ancient times,
at least utilitarian pottery, probably had that look. It probably looked well used and
had that patina of use on it. Okay, I have coated the two little, the bowl and the jar
three times with oil. And I think this is my last time because it seems the oil isn't soaking in as
quickly as it did the first couple of times. So I think we're getting kind of impregnated with,
whether it's impregnated with oil or just, you know, carbon from the burning off of the oil,
I'm not sure. But so I'm going to do it one more time. Well, no, I've done it the third time.
I'm going to go ahead and burn that off, sterilize it good and call that good for the sealing. And
we'll see how it does. The shoe pot has yet to boil. It's been sitting here the whole time,
maybe an hour or so on the fire. It's got a lot of water in it, though. I think probably holds,
I bet it holds over a gallon. So it's got a large heat sink. And it's probably,
it's my opinion that these types of jars were meant to be buried down in coals. That's why
they're shaped like that. So you can put the coals all around them, get a lot of heat on them
at once, which I don't have enough coals for here. And it's a little bit of a windy day. So I don't
dare build up that much coals because I don't want to start a wildfire. So I'm just going to leave
it soak in there. Every once in a while, I reach in with the spoon and I stir around that cornmeal
so that it's able to do its business wherever. I'm sure there's a lot of starches in that water. So
I'm not sure if boiling is as critical as just cooking it in there. But, you know, we will see.
The cornmeal water in my mug is boiling. So that's good. Getting that one taken care of.
The shoe pot is cooling. I plan on using that cornmeal water to cool the fire, put out the fire
later. So I don't want to dump it out yet, but I'm letting it start to cool down so I can carry it
back to my truck pretty soon. The oil sealing of these two pots is finished. I'm cooking my lunch
in the little bowl. The other jar is cooling. So that's where we're at. We'll do some experiments
once I get these back in my studio to see how well I've done at sealing this earthenware.
A little cornmeal water won't hurt me. These beans are boiling, so I'm sure they're plenty warm.
So good. They're almost too hot to eat, but they're so delicious.
Okay, back in the studio today, I'm going to test how well these are sealed.
Now, this isn't very scientific, because if it was, I would have tested these
before I sealed them and then tested them again afterward, which I failed to do. So here's the
idea. I've got a measuring cup. I'm going to pour exactly one cup of water into each of these vessels
and then I'll let it sit for an hour. I'll come back in an hour, I'll measure again,
and we'll see how much water was lost during that period of time. These two were sealed
with oil or Crisco. These two were sealed with starch or cornmeal. So I'll pour the water in,
come back in an hour, see what we got. Okay, one cup of water in all four vessels.
It is currently 140. I'll come back here at 240 and we'll remeasure the water.
Okay, let's see how we're doing. Ready to measure some water.
First, the bowl. This was oil sealed and before it was fired, it was burnished. Not all of these
were burnished. So this was burnished inside and out, which would help seal it a little more.
And I am at just barely under a cup. It's so less than a cup, it's practically insignificant.
We've lost very little water in this bowl. Next is the jar. This was made from the same clay as
the bowl, but it was not burnished beforehand. It was sealed the same way using Crisco.
This may be a hair less than the bowl, but certainly not much. It's not a quarter cup
down. It's not even an eighth of a cup down. It is down a little. So I'd say it lost a little
more water than the bowl, but not significant. Now my mug. My mug was sealed using cornmeal
boiled in it. This was also burnished a little bit on the inside.
And this is just slightly less than a cup. So maybe it's less than an eighth of a cup down.
So again, it's slightly less than a cup. It probably lost equivalent to the jar,
but more than the bowl. Now the shoe pot. It does have the crack on the side, but of course
with a cup of water, the water is far below the crack. And this of course was sealed with cornmeal.
That probably lost the most, to tell you the truth. That's over an eighth of a cup down.
It's less than a quarter cup, but more than an eighth. Somewhere in between there.
So almost three quarters of a cup left. So can't really say why, except maybe the inside of this
being a large jar was the least smoothed, the least polished. And so it has a coarser texture.
I don't know. But none of these are especially, like a lot of times with an earthenware jar,
if they're sitting there holding water for a period of time, they'll feel damp on the outside.
And they all feel cool on the outside. This one probably feels the most damp. This a little bit
damp. And this just barely, just barely. It could have to do with the volume of this. Perhaps the
clay itself was wicking up more water because there's more clay in it. I'm just guessing.
But this one does not feel especially damp. You can see the stain on it where it has gotten a
little bit wet here. It has soaked up some of that moisture and it's showing.
And I can feel, like I said, dampness. This one the least. But you can feel a little bit
of dampness. But sometimes if you do have one that isn't sealed and that is quite porous,
you leave it sit here, you will actually have a wet spot on your table. And I do not have that
here. There's a couple of drops here, possibly where pots were sitting. But honestly, they could
also be where I just spilled when I was pouring into my measuring cup. So it's hard to say.
But I would say these are all pretty well sealed. And I'm pretty happy with that.
And I have no problem, you know, drinking coffee or tea out of this or food out of a bowl. I don't
think that's going to be a problem. Yes, if you're eating things in it that can sour easily,
like dairy products, you know, that sort of thing, you may have some problems and you may need to
throw these in the fire and sterilize them occasionally, you know, burning, heating them up
to kill any bacteria that's living in them. But an earthenware vessel is no more dangerous than
a wooden cutting board or a wooden spoon, because the wood is porous, and it can also draw in food,
and it can become sour. But like I said, our ancestors ate off of earthenware. So,
you know, you have to decide for yourself. I am not a food safety expert by any stretch of
the imagination. I'm just telling you my observations, and the fact that our ancestors
did eat on these. And I know people that do eat out of these and I have eaten out of these,
as you saw in this video. So, you know, make your own mind up what you think is right.
But as far as using this for things, yeah, would I use it for a flower vase? No,
it would make a terrible flower vase because it's porous. But would I use it to eat out of?
Certainly, or eat on. I live in Tucson, and down the street here at the University of Arizona,
at the Arizona State Museum, they have a whole set of dinnerware that Ansel Adams commissioned
from Maria Martinez, plates and such. And that was what his formal dinnerware was at his house.
And these were earthenware pots that Maria Martinez made, fairly low fire. And yeah,
they are porous. So, lots and lots of people have eaten off of earthenware. Like I said,
use some intelligence when you come to deciding what to use it for. It'd make a terrible fish
tank, right? But in New Mexico, it is really common to cook beans in a micaceous cooking pot
on your stovetop. Earthenware vessels have been for millennia used for various purposes,
and in many parts of the world still are. So, use some discretion. But these can be sealed to a
certain degree, and they can be used for things. If you know any other ways to seal earthenware,
go ahead and leave a comment about it down in the comment section, and I'd like to see what
your ideas are on that. Like I said, also, I'm going to be in the future, hopefully,
making one that deals with milk sealing, because I don't know much about it myself,
and I am curious. If you'd like to learn more about how I fire this earthenware in a low fire
outdoor firing, check out this video over here, which is going to go into detail on that process.
I appreciate you coming on my adventure with me today. We'll catch you next time.
