How To Install Replace Door Locks Chevy GMC Truck Silverado Sierra Yukon Tahoe Suburban - 1AAuto.com

Auto Retech
2 followers
This video is brought to you by www.1AAuto.com, your source for quality replacement parts
and the best service on the Internet.
You've got yourself a Suburban, Chevy, or GMC truck.
This in particular is a 1999 Chevrolet Suburban, same as a 1992 to 1999 Chevrolet or GMC Suburban,
and pretty much the same as an 1988 to 1998 Chevy or GMC truck.
What happens a lot on these things is the power door locks go out.
On this particular truck, this door, the actuator is not working anymore, so when you lock and
unlock the doors of the switch, they all lock or unlock except for this one, so I'm going
to show you how to fix that.
It's a pretty simple job.
The first thing you've got to do is remove the door panel.
For this door lock actuator replacement, you'll need a Phillips head screwdriver, a regular
screwdriver, a putty knife or door panel clip tool, a drill with a 5-16th drill bit, a coarse
bolt, 1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1 front bolt, a ratchet and socket for those
coarse bolts.
First we remove these two Phillips head screws from the door pull.
A little tip, if you get one that's a little tough, use a hammer and just tap the screwdriver
a little bit and that will loosen it up and also drive the screwdriver down on the screw
Remove the door handle surround by using a screwdriver, four corners, it comes out.
Here's the back side of your door panel, and you can see here the pins, and they go onto
these grommets.
You can see you want to pry and make sure you don't break.
What you'll do is you'll break the plastic on the door panel, you want to be very careful.
When you push your knife in, you want to push your knife in under here and pry like that.
Really you want to try and get it all the way right under there.
What you want to do is get your tool under there, slide it until you feel something,
then pull it out, put it back in, and force it underneath, and then put your screwdriver
underneath, and pop the clip.
Then repeat this procedure for all the clips around the outside edge of the door panel.
Now that the pins are all loose, lift it up like that, unplug your light, speaker, and
power window switch.
So you have a close-up on exactly how this switch works.
You press on this little tab here, and work it out.
That tab is what holds it in, and then on this, you'd be pressing down on the tab there,
and this light you can just pull right out.
Okay, so this plastic here is a water shield, and pull it out.
To remove our original, we've got to drill out these two rivets here.
So inside the door, it's positioned like this.
There's a rod you have to pull down through here, goes up through there, and then it connects
onto there.
There's a connector that connects onto there, and then you can take it out.
So here's our original, here's our new, so we're going to have to transfer this bracket
onto the back side of that, and I can also swap this dust cover onto here, because this
is a more complete dust cover.
So I've switched my bracket over, which is going to mount in like this.
I've put my dust cover on, so I'm going to put it up in there.
I'm going to connect this, and I'm going to connect the electrical connection.
Okay, so now I've got it in, I've got the rod back up, and you can see it's here, and
I'm going to use a couple of coarse-threaded bolts, rather than rivets, to hold the bracket
on the other side.
Okay, so it's in somewhat.
I'm just going to test it now, just to make sure.
I'm going to move you over here.
You can see our door lock right here, down in a closed position, and it's working.
So we'll put the other bolt in, and then put the door panel back on.
Okay, so we've got our door lock actuator back in, we've put the water shield back up,
we're ready to reinstall the door panel.
So first, we want to connect the speaker and the light, and then push the window up through.
So the speaker first, pretty simply clips on, and the light, okay.
There's our power window, so then we hook this on top, come through, and then we line
up a pin, open the first one on top here, make sure this one over here is lined up when
it is, start pushing them in, make sure all these line up, make sure the bottom ones are
Pull our switch up, install it, flip it back down in, flip on our door handle, grommet.
We install our two screws, tighten them up, and we're done.
So we've replaced the door lock actuator, we've got the door panel back on, and the
screw's all done, so now, lock, unlock, yay, and that's it.
Door lock actuator replacement on these GM trucks and SUVs, it's a pretty easy installation,
requires basic tools, the drill, and you can do it.
We hope this has helped you out, thank you very much.
Be sure to visit www.1AAuto.com for all your parts feeds.
This video was brought to you by www.1AAuto.com, your source for quality replacement parts
and the best service on the Internet.
You can call us toll-free at 888-844-3393.
We're the company here for you on the Internet and in person.
