Binding Peter Rabbit using the Sewn-Board Binding; Sewing // Adventures in Bookbinding

Sparky Deal
161 followers
In this two-part series I will bind The Tail of Peter Rabbit using the sewn-board binding structure. This robust structure, along with the heavy paper I use, make it a perfect book for little children.
#Handicraft #DAS Bookbinding #Sparky Deal #bookbinding #DASBookbinding
This week I'm going to bind the Tale of Peter Rabbit. This is a family favourite for us and I
used my wife's copy from when she was little as influence for the formatting of the PDF I made.
This binding style is the wonderful and undervalued sewn boards binding. It's perfectly
suited to children's books because it opens so well and it's easy to make and produces a
wonderful looking book. It's perfect for people early on their book binding journey.
I start by finding some suitable paper. I wanted a heavy paper that will resist being torn by
little hands and is smooth and white to reproduce the wonderful images of Peter Rabbit, his family,
friends and his mortal enemy Mr. McGregor. I found a very nice 200 gsm paper at Officeworks
in A4 long grain with a matte finish and it was suitable for inkjet printing.
The finished book size I'm after is just under A6 and so I need short grain A5. This paper ticked
all the boxes and I just need to cut it in half to A5. I did a heap of test printing using another
200 gsm paper I already had. 200 gsm is heavier than my printer is rated for, you just have to
give it a go and see. The test prints went well and there was no problem with double-sided printing.
The scanned faded images didn't show up very well but this wasn't the printer's fault
and I spent a day enhancing the images to make them print nice and vibrantly. Printing at the
best quality it took three hours on this economy Epson Workforce WF7840. When I grabbed the pile
I was confused as to why there were so many sheets. It had printed single-sided. I spent
another couple of hours trying to work out why. Maybe I broke the printer. Even with the paper
from the tests it no longer would print double-sided from the manual feeder or the trays.
Standard paper still printed double-sided fine. I ended up feeding the sheets through a second
time and printing on the other side. This meant I finished with two copies which is fine because
I was so pleased with the result. I'm happy to have another copy. You can see the A5 paper will
result in a larger text block than the original I'm using as my inspiration but the sewn boards
binding doesn't have a square and I'll trim it down so that the finished book is about the size
of the original. In addition to the text block I need two pieces of A5 short grain decorative paper
for the end papers, two pieces of A5 short grain 300 gsm or 10 point card for the outside of the
boards and two pieces of A6 long grain one millimeter board for the core of the boards.
If you want to bind your own copy of Peter Rabbit the PDF I made is available from my Patreon store
and the link is in the description. This is the first digital product I've made available for sale.
I've tried to keep it affordable and buying a copy is another way you can support the DAS Bookbinding
it first and then fold it more crisply with the one millimeter board inside of it so that the fold
is in the shape of the edge of the board. For the sewn boards binding you want no swell. One way to
reduce swell is to have more paper than thread in the sections. That shouldn't be a problem with 200
gsm paper but I also don't want the sections to be too thick. I settle on two sheet sections and
using one of my thinner linen threads. I used 25 3 but I should have used 43 which I used on the second
copy. I had to do a bit of pressing to remove a bit of swell with the thicker thread. I also left
everything under a weight overnight to compress everything and to get the air out as bookbinders
sections are connected to each other in between the kettle stitches. So I decide to do a single link
stitch halfway between the kettle stitches. I made a punching guide for the holes. I marked trim marks
eight millimeters in from the head and five millimeters from the tail and positioned the kettle
stitches 12 millimeters in from these. For the link stitch I mark two holes 12 millimeters apart
and for keeping the sections in order. I marked my punching guide on the wrong side for using right
handed so I quickly use an awl to transfer the hole positions to the other side. One advantage of this
I tip the endpapers on to the outer sections. There's no advantage to sewing on endpapers since
the boards are sewn on with the sections. It's a very strong design perfect for children's books.
Sewing is very straightforward. The first two sections are joined at the head with the square
knot and I catch up the section below each time at the center. This is often called French sewing.
I only use this on small books without sewing supports or on very large books, and I mean
really large, over tapes or the occasional book where the sewing will be visible. In which case
it's more of a decorative element than a functional one. It can be both. I finish with a double kettle
the cover boards. Because there is sewing thread inside the folios of card I'll cut a thin sliver
of board off the spine edges. But I want the board to be full width outside the kettle stitches.
I glue it in at the spine and a bit at the head and tail where the board might be exposed.
I forgot I'm planning to trim the book heavily at the head and tail or I would have glued it in a bit more.
and putting it in a finishing press. But not everyone has a finishing press and you don't need one.
It's common for professional bookbinders to glue the spine on the edge of the bench.
They usually put some weight on it and just glue it up. The main reason they do it is because it's
fast and time is money and you can do this too. I'll pretend the bottom brick is the edge of my
bench. The finishing press does give you more control especially if you're trying to avoid
gluing tapes and don't want to get glue on your floor. Because this book doesn't have a heavily
lined spine the material used for the lining needs to be strong. I normally use a quality Japanese
paper around 80 gsm. I forgot that I'd moved my paper to my storage locker. Instead I use a high
quality handmade paper. I cut a strip slightly wider than the spine and glue out the spine and
paper and apply it. I use a paste brush to stipple the paper and work it down into the grooves between
dried I trim the overhangs at the head and tail and then transfer the trim marks from the punching
guide to the outside of the book. I then trim the edges with the guillotine with a nice newly
sharpened blade. I always tell people not to cut greyboard with the guillotine. This is a time where
it can't be avoided. If you don't have access to a guillotine then the best thing to do is to trim each
section individually to the same size before sewing. You get a very good result like this. I wouldn't try
cutting the edge with a knife and a ruler. With the heavy paper and boards attached it's likely to end
in tears. Next week I'll finish the book by covering it. Don't forget the pdf I made of The Tale of Peter
Rabbit is available from my Patreon store and the link is in the description below. As always I really
appreciate you hitting the big thumbs up button. If you're able and want to you can support the
making of more videos like this through Patreon or with a one-off contribution and the details are in
the description below. If you want to be notified of my future videos please hit the subscribe button.
Until next time, cheerio.
