#pottery#oxidation#reduction#handicraft hello Potters. in today's episode we're going to the answering a very basic question that many beginners have which is, what is the difference in between oxidation and reduction? this is a very simple question to answer and it mainly has to do with how much oxygen is in your atmosphere while you're referring your work primarily in the glaze. hopefully this answered a very basic question. most of us have kilns in our homesteads are oxidation Potters simply by the fact that we have electric kilns.
** wanna send me food and make me fatter? p.o box : 4540 florin road # E 138 Sacramento zip:95823 name: Donte the potter
Hello, you dirty potters.
How are you today?
Today, we're gonna talk about
oxidation versus reduction firing.
If you're a new potter in the pottery community,
you probably don't know what they are,
but you've probably heard these words before.
What are they?
How do they translate to my work?
When I buy a kiln, will I get an oxidation
or a reduction kiln?
Like, will it actually matter?
Does it matter to the bisque?
Today, we're gonna go over some of those things.
Firstly, we should get this out of the way.
The type of kiln that I have is an electric kiln.
Throughout your pottery career,
you're gonna meet a bunch of different types of kilns,
all different sizes, different shapes,
different firing processes,
but the one that a lot of people have in their homes
are electric kilns,
and that's because we have electricity in our homes
and not so much just, like, fire laying around.
The way that people with electric kilns, such as myself,
heat up their work and make sure that the glasses
fuse to the product and do their bisque
and all that kind of stuff
is with the electricity in their house.
We have elements or coils inside of our kilns
that heat up, and those are the things
that do the heat work inside of our kilns
through the process of electricity.
But most electric kilns are considered oxidation kilns.
I say most because there are a couple kilns that I've met
that are, like, neutral fire kilns,
where they're a little bit oxygenated,
but also, you know, they kind of do a little bit
of something else in between,
and I've also met a couple of these types of kilns
that have been turned into raccoon kilns as well,
and those technically are a different
firing process altogether.
So if you're sitting at home wondering,
is my kiln an oxidation or a reduction kiln?
If you have an electric household kiln like I do,
you probably have an oxidation firing kiln.
Let's start off at the base.
In ceramics, we throw our stuff on the wheel
or we sculpt it or we do whatever we do to it
with usually a bit of water,
and then we let it dry out to the bone dry phase.
Once it's in the bone dry phase,
we put it in the bisque kiln to be fired the very first time.
This is just considered the bisque.
You're getting the water out.
You're letting it be a little bit more handleable
when it comes out so that you can glaze it a little bit more.
It absorbs water a little bit more.
It's awesome at that phase.
It doesn't really matter whether it's oxidation
or reduction at that point.
People do do reduction bisque firings.
They're out there, but at this point,
that's not what we're really worried about.
When we potters talk about oxidation
versus reduction firing,
what we're really talking about
is the glaze firing process.
Oxidation firing just means that in the glaze firing,
there's enough oxygen floating around the kiln
for the combustion of fuel to take place.
But usually when we talk about this,
we're talking about a gas firing kiln.
As I said before, I have an electric kiln,
so I don't have to worry about the combustion of oxygen
as a fuel source or fire for heating up my kiln.
My elements do all the work for me
through the use of electricity.
When we're talking about oxidation versus reduction,
most people are usually talking about using fire
as a source of fuel,
but this would include, in an oxidation firing,
having enough oxygen to flow throughout the kiln
in order for the fire to use it as combustion
as a fuel source for heating up your kiln
more and more and more.
There's these things called dampers and flumes on the kiln
that you can kind of manually adjust
to let air in and out of the kiln
so that you can adjust the amount of oxygen going in
or staying out of the kiln.
In a reduction firing,
especially when you're using a gas-powered kiln,
it's the exact opposite.
You're trying to reduce the amount of oxygen in a kiln.
That's why it's called a reduction firing.
They're trying to reduce the amount of oxygen in the kiln
by certain processes.
This might be closing or plugging up
the flumes or the dampers.
This might be pushing more fuel into the kiln,
into the chamber,
so that the fire uses it as a combustion point.
Because fire technically uses oxygen
as a point of combustion and fuel,
you can technically force way more fire into the kiln
so that it can use up all of that oxygen.
It's actually really interesting
because when you close up all the holes
where oxygen would get into a gas-fired kiln
and you increase the amount of gas,
the amount of fire in the kiln,
the oxygen still has to burn, right?
The ware still has to heat up, the kiln still has to work.
So that fire,
knowing that there's not a lot of oxygen molecules around,
will often borrow a lot of oxygen molecules
from either the surrounding environment
or the glaze inside of your pottery.
Yeah, it can do that.
It blew my mind the first time too.
The fire will actually borrow oxygen
from your clay and glazes and use them as a fuel source,
which generally changes the look of your pottery.
One of the more common reactions
is that whenever you put copper
inside of an oxidation kiln, it turns green, right?
It's just, it's copper, of course it's green.
But when you put it inside of a reduction kiln,
that fire ends up borrowing a lot of the oxygen molecules
from the pottery and the glaze itself,
which turns it like this weird bloodish kind of red.
And it's awesome.
There are some beautiful reds
that come out of reduction kilns.
A lot of people actually choose to do reduction firings
for this very reason.
When I was a baby potter and I was in school,
I actually grew up using a reduction cone 10 kiln
for like the first four years of my life.
And then I went to a studio and did my own thing
and used an oxidation kiln, but it was really big.
So the heat worked a little bit differently.
Now that I have my own kiln,
I understand the difference in between,
well, I understood it before that,
but when I was kind of in school,
I just thought that this was all kilns.
I thought you needed a fire for every process.
So when we talked about oxidation and reduction
and we always did reduction firing,
I just thought that's the way kilns worked
throughout the world.
That's not true.
Now that I have my own couple of kilns, actually,
I know the difference and I know how they react
with the chemicals inside my glazes and my clay.
But that being said, if you're looking for an explanation
in reduction versus oxidation, that's it.
It's really just oxidation, oxygen in the kiln chamber,
reduction, reduce the amount of oxygen
in the kiln chamber.
That's all it is.
Well, thank you Dirty Potters for joining me today.
I hope that helped some of you beginner potters.
I feel like this is knowledge that you kind of come across
at a later time when you start messing with other kilns.
But when you're a new potter and you hear these terms,
you're like, I don't know what those mean.
It all really just has to do with reduction of oxygen
or the presence of a lot of oxygen with any kiln.
That's all it is.
Just remember, reduction is reduce for oxygen.
Oxidation is just straight oxygen in the kiln.
That's it, simple as that.
I will link another video down below for you
in the description below this video,
just in case you want another source.
I mean, it's always good to get multiple sources, right?
You just can't believe everything that everyone says.
But I think that you should see
some other information as well.
Plus, this one has pretty pictures and me small brain,
so it helped me lots.
But thank you, Dirty Potters, for joining me today.
If you found this information helpful,
click the like button.
That way, YouTube doesn't hit me while you're not looking.
You guys have a fantastic day.
Good luck on your next art projects,
and I will see you, Dirty Potters, next week.
You know, it's funny.
I actually remember a long time ago,
people, when we started moving towards oxidation kilns,
would try and get reduction stuff
out of their oxidation kilns.
So you would get potters who would light incense
and try and stick them in the peepholes of their kiln.
I'm like, oh, if I just put smoke in there,
it might help a little bit, right?