This is a 5Ch RTF Qidi-560 brushless RC airplane. It comes with 3.7V 500mAh 1s lipo battery which provides flight time of 15-20 minutes. The plane is equipped with rudder, elevator and ailerons as control surfaces as well as cool led lights which can be controlled by a single click on the transmitter. Also, it has three different modes of flying - beginner, intermediate and expert. In beginner's mode gyro is fully activated which will prevent new pilota from crashing but in this mode, you cannot do any aerobatics. In intermediate mode, gyro is partially activated and you can do some aerobatic flying while in 3D mode or expert mode, pilot has to control the plane himself/herself without gyro assistance. You can watch rest of the features and specifications of this plane in the video.
Welcome to the channel guys. We are unboxing this cross-country RC aircraft today. It's a
four-channel RC aircraft and is available in blue and red color. You can see some specifications.
Wingspan is 51.2 centimeters. Fuselage length is 37 centimeters. Take-off weight is 94 grams.
Motor is 1504B, 4700 kilovolts. Electric regulation, 7 ampere. Steering gear,
3.7 grams and the plane has three of them. Remote control, 5 channels. Oh, it's a 5-channel
RC plane. Sorry, I said it's a 4-channel. Flight control system, 6-axis gyroscope.
Propeller size, 5 by 4.5 centimeters and it's a two-blade propeller. Battery, 3.7 volts, 500 mAh.
Continuous flight time, 14 to 15 minutes. Easy to assemble and suitable for beginners.
Suitable for 14 plus years and the model number is QIDI-560.
Wing, you can see the servo that controls the ailerons. Fuselage with horizontal and vertical
tails and this propeller. You can see the brushless motor inside. Flight controller,
this is the battery compartment and we get a spare propeller, screwdriver,
LN key and some screws and this is the front landing gear and this is the transmitter.
It says 6-channel multifunctional remote control, 2.4 gigahertz. QIDI model. It needs four AA
batteries and finally we have this instruction manual for this RC plane. Safety precautions,
charging and battery cautions, names of aircraft components, assembly instructions,
this is also same. Transmitter function introduction, mode 1 and this is transmitter
function introduction for mode 2 transmitter. Battery charging and assembly, operation
introduction, flying adjustment, adjustment for the left or right deflection, flight warning,
replacement of engine components, replacement of steering gear components. Let's start to assemble.
Before fixing this wing to the fuselage, we have to connect these wires to the flight controller.
You can see two wires coming out of the wing. The red and white one goes into this slot.
Done. And the next wire, this one, goes into this slot of the flight controller. This one.
Done. Now we can fix this wing to the fuselage. We're almost done. Just need to install the front
landing gear. Done. And yeah, I forgot to show you the charger and the battery that comes with
this plane. This is 1s LiPo battery that comes with this plane. It's 3.7 volts, 500 mAh LiPo
battery and this is the charger. Let's connect the battery to the plane. Lights look really cool.
Let's put in four W batteries in the transmitter. On-off switch. Once you turn on the plane and the
transmitter, once you turn them both, this white front LED and this back red LED will go solid.
Now for the connection, you push this throttle up and then down. Now the transmitter is connected
to the plane. This right stick controls the elevator and the ailerons. Elevator and ailerons.
And this one is throttle and it controls the rudder also. Alright. And this one is one key
aerobatic button and it controls these LED lights as well. So if you press this for three seconds,
the lights will turn off. You can see the LEDs of the plane have turned off.
And if you want to turn them on again, you need to press this key for three seconds again
and the lights will turn on again. And here you can see a switch at the top right and you can see
3D manual mode, gyro auxiliary mode and novice 6G mode. So you can switch from 3D to 6G and 6G
to 3D mode using this switch button. And these four buttons, these four buttons are trims.
If your plane is not leveled, you can use these buttons to level your elevator, aileron and rudder.
Alright guys, I can't wait to fly her. I will see you outside.