Mastering Eye Lights | Cinematography 101

Studio Solution
24 followers
Hello, my name is Valentina Vee and welcome to 4-Minute Film School.
Here on the Aputure channel, we are talking about eye lights. Let's go.
Hello, I'm Valentina Vee and today I'm with cinematographer Jon Salmon.
You may know him for a little thing called VGHS, Video Game High School on Rocket Jump,
as well as Dimension 404 on Hulu and 5 Second Films.
And I've asked him to come and teach us a little bit about eye lights.
First of all, what are they?
So an eye light, you'll actually see one on me right now,
is a reflection of a light in an actor's eyes.
And its purpose is to draw the audience's attention to the actor's eyes.
I see it. It's right there.
It's literally in the eyeball. That's what the eye light is.
So when we're thinking about do we put an eye light or not,
what are some things that we should consider?
So you want to think about the genre you're playing in when you use an eye light.
Does it need to be naturalistic?
Or in something like a music video, can you be more kind of strange and abstract?
With an eye light, you never want to have the source pointed directly at the person
because it's just meant to be a reflection of the light.
And you always want to place your eye light before you place your key light,
unless your eye light is your key light.
Let's take a look at some examples.
All right, so for our first setup,
it was more of a traditional eye light setup that we had here.
I see sort of two eye lights gleaming in her eyes.
What were those?
The first thing I set up was a 120D skipping into like a silver reflector
placed on the floor to create like a really low eye light just in the bottom of her eyes.
And the second thing was an MX with two layers of diffusion
placed directly above the camera creating a second sparkle a little bit higher up.
So I noticed that you first place it and then you pan it off
because you don't want that direct light on the subject.
Why not?
Correct.
Well, if you think about where these eye lights are placed,
one is from a skip bounce on the ground.
So I'm not trying to do a horror movie look, right?
I want to pan it off enough that I can just let this be very ambient fill beneath everything else.
And then the second light is just like right from above but it's a very small source.
It's not a good thing to be keying a person with.
So again, you pan it off until you don't feel the effect of the light on the face or you barely do,
but you still see the reflection in the eyes and that's the sweet spot with eye lights.
So I noticed you had a third light playing in the scene which was your key light.
What was that?
That was a 300D with a light dome on it basically creating a soft box
and that was my soft key light.
The reason I placed the other two lights first
was because I wanted to make sure that those weren't going to be my key.
I had them panned off enough that it would just be an ambient fill,
but then my 300D would overpower all three of them
and create my third and largest light in the eyes.
Well, let's check that out.
So the second setup, the eye light does not look very natural at all.
Why is that?
This is for the purposes of like a music video or kind of an abstract setup,
something where you're allowed to like kind of get weird with the lighting.
So what created those streaks down the center of her pupils?
So we took two RGB quasars and we put them on either side of the camera lens,
just right next to the lens,
and we had them vertical, a little bit lifted up,
and then in between the quasars we also had an MX, an aperture MX,
and we had it panned off just a little bit so it wouldn't spill,
it wouldn't be the key light for the subject,
but it would still create a nice reflection in the eyes more than just a cat's eye.
Yeah, so those lights were the eye lights,
but they also were the key lights, at least those quasars were, right?
Yes, that's true.
The key and the eye light were the same unit.
And sometimes that's how it goes, like what you're looking at right now.
And then you had another light there off to the side, what was that?
That was the 120D that was being handheld by my grip Braden.
He was just lifting it up and down,
basically just there to create a lens flare, something on the edge,
and we were shooting on a 24 millimeter lens
because that allowed us to bring the camera much closer to the subject,
which was necessary because I wanted the lights to be very large in the subject's eyes,
so I wanted them to be right next to where she was.
Plus it creates a really cool music video effect,
pushing the face back, making it look like 90s style hip-hop.
So let's take a look at how you built that.
So the last lighting setup actually looks really difficult, but it's only two lights.
It looks like an old camera that took a flash photo and created the red eye effect.
Can you explain what's the purpose of this?
So Jordan Cronenweth used this in Blade Runner to create kind of an alien effect.
If you want to have someone look like a replicant or somebody in sci-fi,
it's very surreal because instead of the pupils being black,
they kind of have a glow about them, like there's light coming from the inside.
That's awesome.
So how do you make someone's pupils glow?
So the way you pull this off is by putting what's called a 50% mirror,
it's part of any teleprompter,
and you put it directly in front of the camera lens,
and then you skip a light into that lens,
but you have the glass at an off axis,
you shoot at a 45 degree angle, it bounces back,
and so if you were standing in front of the camera when you're doing this effect,
you would see just a light emitting from the middle of the lens.
That's what it looks like.
I know you used a Mini 20C for that, which is a color temperature adjustable light,
but did you notice any difference between the different color temperatures that you were trying?
Going between 3200 and 5600,
I didn't really see a big difference in terms of the color inside of the pupils.
That didn't change that much,
because I think what's happening is light is skipping into the eye
and doing some really weird things,
and bouncing around and coming back at colors
that are probably reflecting off the colors inside of your eye.
Yeah, I mean there's a reason why it's called the red eye effect
and not the green eye or purple eye effect.
And what other light did you have off to the side?
I had a 120D going through a Bowens reflector,
and it was creating just an edge light,
just to create a more three-dimensional feeling.
Awesome, let's take a look.
So that was your episode on eye lights.
Super cool by the way, that last one with the mirror thing,
that was, I've never seen that done before.
So what are some of those points again to remember?
So our three points are,
you want to think about your genre when you're sculpting your eye light.
You never want to point a light directly at the subject,
you want to have it panned off,
because it's just meant to be a reflection in the eyes.
And you always want to place your eye light
before you place your key light,
unless your eye light is your key light.
To play devil's advocate,
sometimes you don't need an eye light at all.
I know we've been talking about eye lights this whole episode,
but there are so many examples of popular TV shows and movies
where they don't even need an eye light to create drama
or to create intrigue,
which brings us to our question this video.
What's an example of a scene in a movie or TV show
that did not use eye light and was successful?
We want to know.
Leave your answer in the comments below.
And the best one gets an Aputure MW,
which is our little underwater LED.
If you liked this,
go ahead and subscribe to the Aputure channel,
follow Aputure on Facebook and all the social medias,
follow Jon on Instagram,
follow me on Twitter.
And until next time,
bye.
Bye.
