Control Surface Direction | Quick Tip | Motion RC
Sep 23, 2024
For beginners, knowing which way your control surface are supposed to move is imperative in flight. Hopefully, this Quick Tip helps!
Today's tip is going to be on control surface direction and for beginners mostly,
how do you know your control surface is going in the right direction?
Hello everyone, welcome back to MotionRC. I'm James with another Tuesday's Quick Tip.
Today's tip is going to be on control surface direction and for beginners mostly,
how do you know your control surface is going in the right direction?
Obviously every plane you get will more than likely have some sort of diagram within the
manual. I know everyone that we sell, I always see it in there and they give you a little idea
of when you make a right aileron roll, how your aileron or control surface should interact,
how it should direct the direction that it should go. So for the purpose of this video,
we're going to quickly show you which way and how to know which way is the right way.
So we're flying with mode two. So if I make a, my ailerons are controlled this way,
elevator this way and rudders down here. If I make a right aileron input, then you should see
that aileron pop up on the right side, looking at the plane in this direction, as you do. Now
for beginners, one of the ways that I got over this, you know, and as I was building up and
getting into RC and aviation in general, was just thinking about it logically, was as the
passing over, if this, you know, if this aileron goes up, what do you expect? What would you expect
the plane to do? The wind is going to push and roll that aircraft to the right as it's doing here
and left the wind is underneath it, pushing that side of it up. If that's one way to think of it,
elevator, same thing. When I pull down on the elevator, that's going to bring my elevator up
and put my direction, you know, up, if you will, in your angle of attack. And then on the rudder,
your rudder moves into the movement that it's doing. So if you make a right rudder input,
you're going to see that rudder move to the right, which is going to kick that tail around
and make the plane, direct the plane to the right and to the left. So that's pretty much it.
Basically, when it comes to ailerons, whatever direction your aileron should move up into the
direction you're controlling, elevator should move up with the direction you're controlling,
and then rudder should move into the input that you're making on your sticks. So I hope this
helps you out. This is the Skynetic Havoc. If you're interested, link will be in the description
of this video. And as always, guys, this one was for beginners, but you never know. It's one of
those things you're always going to check. And even us seasoned pilots sometimes take off with
reversed ailerons or reversed elevator because even we forget to do a proper pre-flight check,
or we're so used to it, we just think it's perfect. And we make a mistake. It happens.
But that'll do it for us here with another quick tip. Remember guys, the wheel. Every Friday,
we're spinning that wheel. So be a subscriber for our sub spin and win contest. Every Friday,
we're giving away something great. You just got to subscribe and click that notification bell.
That'll do it for us with this quick tip. See you next week. Bye guys.

