How to load and fire bisque for beginners tips and tricks

Handicraft occupation
458 followers
#pottery #bisque #kiln #ceramic #tutorial #handicraft
hello you potters, how are you today.
this video was made specifically to show you how to load your greenware and ready it for a bisque Kiln load.
we go over how to fire a killing Master touch screen and a kill master control panel that most people should have if they have their own personal kilns.
hopefully you found this video helpful although if you have a manual kiln
** My website ( where you can buy my work and frolic around)
https://www.earthnationceramics.com
** wanna send me food and make me fatter?
p.o box : 4540 florin road # E 138 Sacramento
zip:95823
name: Donte the potter
In this video, we're going to learn how to fire a KMT, which is a kiln master touch screen,
and we're going to learn how to fire the regular old button box that usually comes
on the front display panel of most modern kilns nowadays.
Hello, you dirty potters. How are you today?
Today, we are going to be talking about loading and firing your bisque kiln.
There's a lot of information that I need to go over before we even start with actually
physically putting your stuff into the kiln, because the firing process of how to load
and fire your bisque kiln is actually really easy, but making sure that you're safe and
making sure that your ware will survive inside of the kiln while it fires is even more important.
So in this video, we're going to go over a couple of those tips and tricks to make your
firing experience a little bit easier and make sure that your work survives in the kiln.
Before we get started with this video, there's two things I want to tell you.
Number one, a lot of this video is going to be heavy information on how to physically
load your kiln. Some of the tips and tricks that I've learned over time about loading
your kiln and how it would make it a little bit easier for you and some of the things that you
probably don't know if you've clicked on this video, because you probably have never loaded
a kiln before or you're just looking for extra information. That's number one.
Number two, there's a couple of timestamps up here. These two timestamps are just going to
be the button sequences for firing your kiln. Some people are either impatient or they just
want to know how to fire their kiln in accordance with what buttons to push based on what they have.
So I've already made a video on how to fire a manual kiln, kilns that are usually a little
bit older. I made it quite some time ago. I'll post it down below for you. That one's pretty
easy for anyone who has a manual kiln. It's a little bit cringy because it's like one of my
older videos before I learned the lighting and sound quality, but the information is still there
and it'll still teach you how to fire a manual kiln. In this video, we're going to learn how
to fire a KMT, which is a kiln master touch screen. And we're going to learn how to fire
the regular old button box that usually comes on the front display panel of most modern kilns
nowadays. If you just want to cut to that part of the video where you literally just want to
see the buttons to push, then I will leave two timestamps up there. One of them is for the kiln
master touch screen, and the other one is for the display box that has the buttons on it. Those two
are actually really easy to explain and take maybe about two minutes to show you on camera,
but the rest of this video is going to be techniques on how to actually load a biskiln.
Before we get started, there's some information that you're probably going to need if you are a
true beginner at loading your kiln. Number one, you're going to need some bone dryware. Bone dry
is a term that most potters use to describe how dry their pottery is. I'll make a scale for you
right here, and this scale will describe the dry stages in which most pottery goes through
when crafting or after crafting it. When you first make a pot or sculpt, it's in like the greenest of
fresh phases. This is usually wet pottery, wet ceramic artwork. It's usually really tacky,
and it's super malleable. In fact, if you touch it even more so than you're supposed to,
sometimes it'll morph. Most of us know this stage. It's considered to be during the throwing stage
most of the time, or when you take the pot directly off of the wheel and put it somewhere
to dry. After this, it dries a little bit more and starts going through the leather phases.
At its softest point, it'll be malleable, but no longer tacky and sticky. This is called the
leather soft phase. This is the phase in which you can kind of morph and sculpt and form the stuff.
It's not tacky anymore, but it's still very malleable and movable. If you touch it a little
bit too much or bump into it, it will mess up from its symmetry, if that's not what you're
looking for. After it dries from the leather soft phase, it'll go to the leather phase. The
leather phase is where most of us do a lot of our trimming and a lot of our attaching of other clays.
Let's say you're making a mug. Well, this is the stage that we usually attach that handle
to the mug itself after trimming it, if you do choose to trim it. As it continues to dry,
it goes to the leather hard phase. The leather hard phase is like you're not attaching any more
stuff. You're probably not trimming it anymore, unless you're trimming it really late, which is
going to mess up your tools after a while. And the time in which you can attach clay safely
without it cracking too much or trying to really dry them at the same time when you're attaching
stuff, it's kind of over. But this is the perfect stage that I usually use for carving, things of
that nature. Going past that is the bone dry phase. The bone dry phase is where as much water has
evaporated or left the clay body as is possible for your current atmosphere. This is the phase
where it's ready to be put inside of your kiln so that it can go to the bisque and a little bit of
quartz inversion, something that we'll talk about later. But for those of you who are looking for
that fancy word, after all of your work is bone dry, that's when it's ready to go inside of your
bisque load. You don't want to put your stuff in the bisque before the bone dry phase. If there's
water left in the clay body and you put it inside your kiln, the water will usually expand as heat
rises in the kiln, which for lack of better term causes little explosions. And sometimes it rises
a little bit too fast and will end up destroying a lot of your work. Potters have tons of stories
about how they put their stuff in their kiln trying to speed up the process at the leather
soft or even the leather hard phase, only to explode in the kiln because the water molecules
inside of your clay body just expanded way too fast. So as a safe bet to make sure all your work
survives, you might want to make sure that it's completely dry and in the bone dry phase. It's
heavily suggested. All of the drying stages in which I just named on the scale right here are
all considered the greenware phase. Your stuff is greenware until it goes into the bisque. Once it
comes out of the bisque, it is then bisque ware. There is technically a little bit more explanation
scientifically and stuff that goes on in between the greenware phase and the bisque phase in the
kiln, but seeing as this is just a how to load your bisque kind of kiln video, I don't want to
talk about those just yet. We'll talk about them in another video. Making sure that the water is
outside of all of your work so that it's in the bone dry phase is a little bit difficult,
specifically if you've never done it before. As an experienced potter, I can kind of tell by just
looking at something or touching something, but as a general rule, you want to let it dry for a
fairly long time. About a week is what I let my stuff do for air dry just to make sure that it's
completely out. I can show you a couple pictures as an example of something that is leather hard
versus bone dry. For example, this picture here. These are both the same exact clay body and they've
been drying at different times. See how one of them is a little bit darker than the other one?
That's because one of them has a little bit more water in it and in fact is in the leather hard
phase while the other one is bone dry. They also make a different sound when you tap them.
Keep in mind these are pretty much the same exact cup and they're also different dry times. While
one of them still has water in the clay body, the other one doesn't. They sound, feel, because one
of them is cold to the touch while the other one is not. The one that's not is the more dry one
and they look a little bit different even though they're the same clay body. Keep in mind there's
many different ways to tell if something is all the way bone dry or if it's still in the leather
phases, but you really want to make sure your stuff is in the bone dry phase. After you've made
sure all your stuff is the bone dry phase, it's time to start loading it into the kiln so that
we can start bisquing your stuff. Make sure your kiln is off at this point. I usually just make
sure my kiln's off because number one, I don't want any mishaps and number two, it just saves
energy to have your kiln off when you're not using it. I usually go to the back, turn on the breaker,
the kiln turns on, power goes to it, and then I use it. When I'm done using it, I turn it back off.
I'm a big advocate of saving power and because of that, I don't like just having something on all
the time when I'm not using it. So you might want to make sure it's off and completely not running
while you're doing this. When you buy your first kiln, it'll either come with or be heavily
suggested that you buy kiln furniture. Most kiln furniture comes in the form of kiln stilts
and kiln shelves. Kiln shelves both come in whole and halves. I personally like to use halves but
there are some that fill out like over here and will come in entirely whole pieces. I just
personally like halves. This kiln furniture is meant to be used as if you were building
a little tower inside of your kiln. You're going to build them like this. You will then be putting
pottery on one level so that way it'll go right underneath it. They can touch by the way because
it's just bisque. After you're done filling that level, you're going to put one shelf up here like
this and then you're going to continue that process going up and up putting the next level
of greenware on the next shelf and on the next shelf until you have completely filled your kiln.
This is the way that kiln furniture stilts and shelves included were meant to be used.
You're essentially going to be doing it on the inside of the kiln so that way all of your work
is on the inside and stacked all the way from the bottom up. A little potter tip here, if you have
a full shelf it's super easy to set the shelf down while putting four stilts just like this
and when you build the next level you're going to put the stilts in the exact same place.
Don't offset the stilts so don't build a level like this and then build another level of stilts
like this. Just keep them stacked on top of each other for stability but if you have half shelves
it's a little bit of a different story. If you have half shelves like I do you're essentially
going to have to share two of those stilts with the other half shelf so you're going to put one
down just like this and you're going to keep a little bit of space on this shelf right here so
this way when you put the other shelf down you put it right here and you're going to be sharing
those two middle spots. After this it'll sit like a full shelf just like that. Because you now know
the stage that your pottery has to be in as far as the dryness goes and I showed you how to build
levels with the kiln shelves the kiln stilts or the kiln furniture as you will you now officially
know how to load a bisque kiln just put your stuff in the kiln in that manner that I showed you and
it's really easy but here's a bunch of tips that you probably either don't know because you're new
or some stuff that'll help you load your kiln in the future. I'm also going to be providing you
with videos as well as examples up here for these tips. It'd be weird if I just told you I feel like
this is a very physical art form and I should probably show you at some point. Tip number one
your greenware going into the bisque can touch each other this means that not only do you not
have to worry about space that much you can probably load double the amount of greenware
going into your bisque for your glaze load later on. This means for every bisque load that you have
if you're really good at it you can technically get three glaze loads out of it depending on the
stuff inside. This also comes in handy for nesting or stacking. I nest and stack my bowls all the
time I make like 50 or 40 bowls per load but all those bowls fit on one level because I can do this
with them. This is I can literally just fit bowls inside of bowls because they won't stick together
because there's not a lot of glass like material or enough silica or enough metals or irons in the
clay body to stick together and melt to each other. So because stuff can touch in the bisque
you can pull off stuff like this all the time. Tip number two because you can put anything in
the kiln as long as it doesn't go over the kiln furniture or the stilts that I showed you earlier
you could technically put stuff in there a little bit wonky. See this bowl right here it wouldn't
fit flat on its foot so I just like put it in between a bowl and a cup and it totally fits now
but keep in mind when it's edged like this it's a little bit higher right so as long as it doesn't
go over the kiln shelf we're good. Tip number three and it does take a little bit of practice
but when you saw me putting the kiln shelves down earlier you probably noticed that my hands
were a little bit askew that's because it's super comfortable to hold the shelves at the very edges
of them like this like if the shelf is like this it's comfortable to hold it at these sides but
you put it down your hands which are gripping underneath the shelf are probably going to get
in the way of the kiln stilts right it takes a bit of practice but make sure that your hands
are a little bit askew otherwise you're just going to crush your fingers in between the shelves
I do it all the time actually even when I have half shelves to the point where I've developed
just enough forearm strength to put down shelves with one arm because I know for sure that the
kiln stilts aren't going to be in that space so I just put it down like that but for like
seven months I ended up grabbing the shelves by the two half ends and crushing my hands on the
stilts because I was like well this is the most easy way I have to put them in and keep in mind
you do have to bend over when you put them in the kiln so you're probably naturally looking for more
stability it's totally cool to make this mistake a couple of times but just as a pre-warning it's
just easier to skew your hands a little bit tip number four and this is more of a plea please
don't pick the largest stilt first and just be like well clearly it's the largest stilt it's
gonna clear all my cups because clearly this still is bigger than the other ones don't do that you're
gonna waste space here's a little video here right what I did is I got the biggest cup that I knew
would go on that level and as long as all the other cups are smaller than that cup whatever
stilts I picked that is just above that one cup is fine for the rest of the cups and that's how
I enter each and every level but do not make the mistake of just picking the largest kiln stilt
and being like well it's bigger than this cup like test them out see which one gives you the
most space because if you keep doing this you're just wasting space time and electricity tip number
five which is probably the biggest tip is the biggest it's not it's not you'll it's a pun you'll
see it's funny you'll see put your larger stuff at the top of your kiln load there's gonna be
so many times where you know I'm just gonna show you actually there's gonna be so many times that
you want to put something that's like this in your kiln but you can't exactly put this at the
bottom because my biggest kiln stilt is like this big so it's almost impossible not only is it
almost impossible if you have a little bit of space left at the top of your kiln this will fit
right in without another shelf going above it you don't have to stack and if you have half shelves
like I do you can just work around it you can put one shelf here and the other half can be full of
other stuff up here like cups and bowls that's one of the reasons I choose to use half shelves
but for bigger stuff specifically just put them at the top of your kiln not only is it just better
for your space it's also far more stable because even if you could find a kiln stilt that was
a foot and a half tall like this like sideways bases right here you would pretty much have to
have the instability all the way down at the bottom so as a general rule we put the stuff
at the top of our kiln that's super big like this if you're really having a hard time and you have
stuff that's that kind of shape like I just showed you right now you can technically lay it down so
for example the top level of my shelf is right here but that vase was like this big right it
almost didn't fit the camera screen I could just lay that down it's not too hard I don't have to
stand everything up like I said in the previous tip earlier so you can do that with big stuff as
well as long as you put something in between to make sure it stops from rolling because most of
our stuff is round you can even use other pieces if you want so let's say you wanted to put that
big round base on its side but you don't want it to roll while it's firing just in case it hits
anything else just put a piece by its side over here put a piece by its side over here and put
the big piece in the middle and it doesn't roll I like to use kiln stilts but don't tell nobody
that's a secret that's my secret as a final step before I show you how to program the touchscreen
kiln because I know someone's going to mention it down in the comments below there are potters who
are experienced enough who can technically tumble stack their stuff tumble stacking is where you
don't use shelves like I just showed you this is the very standard way tumble stacking is where
people use certain pressure points and load certain things in certain spots so that they
don't crack underneath the heat and the pressure of each other in order to get the maximum space
out of their kiln it's really good for heat distribution the issue is that if you're watching
this video and you're learning how to load a biskiln you're probably not to that level yet
but I know there's gonna be some nerd in the comments below who's like um you don't have to
do this this way guys and there's a thing called a tumble stacking I just wouldn't feel very
comfortable showing you that when you're learning how to load a biskiln but tumble stacking essentially
equates to throwing all your stuff in there but knowing all the pressure points so that you get
the maximum amount of stuff in the biskiln you can get like three or four different glaze loads out
of that biskiln it's really good for conservation of energy and it's really good for distribution
of heat the issue is that it's definitely not a beginner thing could you imagine if I just turned
on the camera and I was like yeah guys just throw your crap in there don't even use just throw all
your crap in there it'd be great everything will survive and when I go over how to load a glaze
load you're gonna have to know how to do this shelf technique anyway and this is kind of the
standard for a bisk anyway as well so it's it's not like I'm teaching you this just because I
think it's the better way I'm teaching you this way because you're gonna have to learn this anyway
the final tip that I can give you that has nothing to do with actually loading your bisk
is that electricity costs different rates for different people at different times of the day
for example in California they charge me way more for electricity in between the hours of like 9 a.m
to 8 p.m so if I want to fire my kiln load I usually fire it after 8 p.m while everyone in
the house is sleeping it saves me money it saves energy and they charge me way less money for
electricity because those are the non-active hours in my general area so if you want to save
yourself a little bit of money or you're a little more concerned about that I heavily suggest checking
out the prices and seeing when like the low cost times are for your electricity so that you can
fire it during those times okay with all that being said I am now going to show you what buttons
to push on the kiln master touch screen in order to fire it hopefully you went through all that
not knowing that stuff but if you did I did leave a time stamp for you so you can't complain now
so this right here is the kmt kmt stands for kiln master touch screen there are such models without
a touch screen and we'll be talking about those later but for now this is the touch screen model
of the kiln master from scott now this is pretty simple to load your bisque it's extremely easy
because it's a guided system you can just push begin here for now you can just go to programs
and you can go to guided start if you're just doing a bisque load and this is your first time
you can worry about these two later if you ever need something a little bit more fancy
but for now we're going to click guided start it's going to ask you if you're firing ceramics
or glass we are firing ceramics so we're going to click next it'll ask you if it's bisque glaze
or preheat we're going to be doing bisque preheat is a whole different thing I usually say yes
because in my old manual kiln I used to do something called candling candling is where
you slowly heat it up until you're sure that all the water is out and I like to do this
just because I like to be a little bit more safe than sorry so I usually put other time it'll ask
you what other time after you push next and I usually go for about two hours most people can
probably figure this out but the hours go on the left hand side and the minutes go on the right
and they display that right about here for you so I'm going to put it for two hours by pushing two
zero zero filling in the minute side with just zeros and then pushing next once I push next
it'll ask me if I want cone o4 o5 or other most people bisque their stuff in between cone o4
and cone o6 the regulation is usually o4 so I'm going to go with o4 I'm going to push next and
it'll ask you whether you want to do it slow or medium at this point you have to decide whether
you want to heat up your stuff slower or medium medium is if everything's kind of thinner or on
the same size scale nothing really in there is too thick or too big because if you heat your stuff
up way too fast it sometimes expands a little too fast in the kiln and it'll ruin that specific
piece because I have a vase in there that's about a foot and a half tall I'm going to go with slow
as I usually do just because I'm more safe than sorry and that's pretty much it for the touch
screen for loading your very first bisque the kiln master touchscreen models are extremely
easy to use they in fact have their own guided system after this you push next you can view
program you can change the time here you can do essentially anything you like but after you've
gone through that guided start process assuming everything is correct into your specifications
it'll tell you the estimated time right here it'll tell you the alarm which almost never well I've
never seen it get to this temperature here you can also change the speed if you want right here
the cone you can change almost everything including the preheat on this little panel right here it's
kind of a review panel and then you can push start if you want it to start it's going to go through
its check all system and then it's going to start firing as you hear it click off now if you don't
want this or you're unsure you want to go over the specifications again you can always push details
and it'll show you that panel again and if you want to stop the entire process altogether because
you either have to go somewhere you're unsure about the firing process or you want to load
some more stuff and you have a little bit more time to do it you can always just push stop and
it will stop the entire process and go back to idle but this is pretty much it for the touchscreen
although it does have a fantastic guided system so it's pretty easy to fire these things off
after you've learned to actually load your bisque now the button box system is a little bit different
but it's still pretty easy to manage so we're going to talk about that one next lindsay hi are
you loading your bisque i'm loading my bisque cone right now can you please show the viewers
at home how to load this specific type of control panel on your kiln because i feel like most of
them have this type yes okay so the first thing that i'll do is i'll hit stop this is basically
like hitting clear on a calculator so next thing i'm going to do is i'll hit cone fire it's going
to ask me how long i want to preheat the kiln sometimes for a bisque i'll do one to two hours
so i'll hit one zero zero enter now it's going to ask what cone i want it fired to it's going to
show the last uh cone that you fired this at but let's say it had been a a glaze firing so i would
hit cone zero five and hit enter again now it's going to ask what speed i want for the most part
for a bisque firing i will do slow or medium so let's just hit slow hit enter again now it's going
to ask for how long i want to hold so this is once the kiln reaches its peak temperature how long do
i want to hold it at that temperature um i tend to not do a hold um but if you wanted to this is
how you do it let's say you want to do a five minute hold so zero hours and five minutes enter
again that's pretty much it but since humans are fallible you want to make sure that you
input everything correctly so you'll go down to this button here and hit review so cone
oh five which is fahrenheit 1888 speed is slow hold is five minutes preheating is for one hour
delay there's no delay alarm i don't have the setup ercd can't remember what that is
cost don't have that setup either fire is 206 so for those things that i didn't clarify what they
are i know it's in the manual i'm just too lazy to look it up but um anyway that's that's basically
how you do it and then also you hit start of course it's of course and if you if you messed
up you're like oh no i didn't mean to hit start cool you just hit stop and you can hear the relays
once you push start kicking on and off usually with this type of kiln yeah yeah okay we are now
back at the house and my kiln is done firing you probably didn't know this because i was using it
for example but i actually fired my kiln earlier for realsies there's a couple of things that
number one what's up with these peepholes should i leave any of them out does that count as venting
what is venting what do i do with those these are called peepholes they're usually meant to
look at the cone watchers that you would usually place right here in front of the hole so that you
could look at it and see how the fire is going i generally don't use them that way but that's
mostly how they're supposed to be used the secondary use for them is to make sure that
some airflow gets in and out of the kiln especially when you're firing or after you're firing your
kiln load like for example whenever i fire my bisque load i actually leave this top one right
here just completely out i take it out all together that's because i know that heat rises and
any of the impurities from the clay bodies are probably going to come up and out of that hole
it doesn't help that much but i always had kind of an inkling of this later on i read the manual
and they were like yeah you should do that that's actually a good thing to do i usually do something
called venting my kiln i usually start venting my kiln around 250 or 300 degrees and that's
considered relatively safe for a lot of other experienced potters i've even heard of some
potters venting their kiln around 400 or 500 degrees slowly cracking it open to let cold air
in and hot air out which is basically venting around that temperature and i'm always afraid
of something called thermoshock thermoshock is essentially when you let cold air in and hot air
out and they kind of meet in the middle on one body you ever wash a candle glass or like a wine
glass that was really hot or had fire inside of it at some point and you wash it underneath cold
water and it gets thermoshock and ends up just exploding you know that can technically happen
with your pottery granted it's really rare but it's one of the reasons why i don't pull one of
these whenever it's like 500 degrees so what most of us do is we open the kiln little by little when
it's done firing somewhere around 400 degrees is my personal take on it a lot of other people have
different takes on it for their temperatures and i'll slowly do this and as it gets a little cooler
i'll start opening and opening in fact this is so regular for potters that the type of kiln that i
have came with this little stilt right here built into the side so this is kind of the locked level
right here where you don't want anyone to open it especially for children it's really difficult
for them to open this just straight up this level right here is if i want to start venting my kiln
this lets a little bit of hot air out and a little bit of cold air in this level here is pretty much
full vent you want the kiln to cool down you're ready for it to go this usually happens for me
somewhere around 200 to 250 degrees i don't have special kiln gloves to take stuff out i heavily
recommend that you get some heat resistant gloves but i take them out barehanded after washing my
hands this is just the level at which i go okay i want it to speed up a little bit more but i
usually do this around 200 to 250 degrees this is something that i'm pretty sure they didn't
intend for me to do but i do it anyway this is when i'm really in a rush granted it's heavily
suggested that you just leave your kiln alone until it's done firing and it equals kind of
the outside temperature of whatever's going on around you i understand that it's going to be a
lot colder than 100 degrees in a colder place than it would be in a hotter place so whatever
your normal temperature is let it get somewhere near that to really open it it's heavily suggested
that you just leave it alone until it's done with its process but i know for sure that some of you
are going to ignore that and when the kiln is completely done firing you have nice ready to go
bisque ware there's a massive difference now you'll probably notice in between this which
is greenware and this which is fully ready to be glazed bisque ware well thank you dirty
potters for joining me today i just thought i would make a video on how to actually load and
fire your bisque along with a couple of other tips and tricks on how to fire your bisque firing
your bisque load as far as the actual sequence of buttons isn't that difficult it's like a five or
six button press along with reviewing your steps and i have a touch screen so it's easy but we did
show you how to do the kind of manual box that lindsay has but i have also made a manual kiln
video with the kiln sitters and everything so we've covered all the bisque videos from this
point on keep in mind that i put the other video the manual kiln for the older kilns
down below for you but thank you dirty potters for joining me today if you found this video
helpful click all the youtube buttons so my youtube overlords are happy with me hopefully
you guys have a good bisque load if you're watching this video specifically because you're starting to
learn to load your own bisque and be your own kiln master i hope you have great luck with that i love
your dirty potter faces and i will see you dirty potters next week thank you for your patronage
it's almost like i thought about what i was going to teach you before i taught it to you
and i'm teaching it to you in a progressionary fashion
