Beginners guide to making a functional TEA POT

Handicraft occupation
458 followers
#teapot #ceramic #pottery
this is the final step in The beginner's playlist as far as a normal progression goes, within the upcoming weeks we will most likely be cleaning up the channel and organizing The beginner's playlist so that we can round it out for people who are just starting their Pottery journey.
this is a very long video and I reiterate things many times such as a teapot is nothing more than a jar with added attachments.
- wanna send me food and make me fatter?
p.o box : 4540 florin road # E 138 Sacramento
zip:95823
name: Donte the potter
I'm not gonna lie, this is like the chunkiest teapot I've ever made in my entire life.
This is, this is a thick boy, this, this, this, he's had too much pizza in his life
for sure.
Hello you dirty potters.
How are you today?
Today we're gonna be tackling the final step in the beginner's playlist, which are teapots.
Now when I was going to school, the very last thing my teacher had me do were teapots.
Because in order to do teapots, you first need to learn the other gambit of things in
the beginner's playlist.
Because doing a teapot requires a couple of things.
The first thing is you're gonna have to learn how to make a jar.
If you don't know how to make a jar, and the lid that goes onto a jar, and how to fit
it properly onto a jar, you're gonna have a hard time making your teapot.
The second thing is you probably have already learned how to make and attach a handle to
a surface of clay, or a mug.
Because in order to make a teapot, you are going to learn how to make a handle and attach
it to that surface.
Because at the end of the day, all a teapot really is, is a jar with a handle attached
to it, that nice lid fit on top, and then after that, the only real step you need to
learn how to do in this progression, is to make a spout.
And the same process in which you use to attach a handle to a clay body, is pretty much the
same process that you'll be using to attach that spout.
Don't go telling me you don't know how to make a jar and attach a handle, I have made
videos for you!
Before we even get started, make sure you have your bulk of your clay, which is most
likely going to be our jar body, make sure that you have your handle and your spout clay,
and make sure that you have your lid clay, right here.
Make sure that you set some extra clay to the side for your handle, your spout, and
your lids.
First, let's make our basic jar.
I know that we've gone over how to put our hand inside here, and pop out a nice form
before, but just in case any of you forgot, let's go over it real quick.
At the stage in which we have our cylinder, we're going to want to pop out this portion
of the pot right here, to make that nice classical teapot form.
Gonna make a big ol' American stomach.
This'll be a little bit easier for those of you who already know how to make a bowl, because
popping out a cylinder, is pretty much the same exact hand formation and pressure that
you're going to use to make a bowl.
First, wet your hand.
Make sure your cylinder on the inside is nice and wet, so you don't get too much friction.
And as you start from the bottom, go ahead and push out with your fingertips, just like
this, and continue to curl your fingertips as you come upwards, but make sure not to
go too high.
You're gonna stop right about here.
And when you get to the top, slowly release pressure, don't push anymore, and just take
your hand right out.
And you can essentially make it as round as you want, until you're comfortable.
Gonna cut off the skirt down here, just like we talked about in previous videos.
Potter tip!
You see my edge right here?
It's a little bit jagged, and I don't want this.
This is gonna cause problems for me later on, either in the finished product, or as
I'm crafting this.
So what I like to do is to smooth out my edges before I even take this pot off of the wheel.
I'm just gonna get my sponge, make a little arc, and push right down on these little jagged
angles right here.
And it should smooth them out something nice.
You see?
Now it's nice and smoothed out.
And whoever uses this pot next will take good notice on the crafter that made this, because
they made sure that all their edges are nice and smooth.
It's time to measure the opening of your teapot.
And the best tool I can name for the job are calipers.
These will measure the inside and the outside of the very top of your pot.
But if you don't have calipers, a ruler is always fine.
Now if you have calipers, they're fairly simple to use.
I know we've already done this in another video, but to review, all you really have
to do with your set of calipers is to cross them, measure the inside of your pot, and
once they almost touch the edges, barely not touching, then you can turn your calipers
around, twist this little knob to the right right here while making sure that you don't
move these two angles, and this will be the inside measurement of your pot.
It tightens nice and tight to make sure that you don't lose this measurement right here.
You know, I'm just gonna slap it around, it's not gonna move.
And if you don't want to measure the inside of the pot, but instead your lip's gonna hang
on the outside, you can easily just open up this angle, go ahead and put it right here
at the very edges of the opening, and this will be your new angle.
You do the same exact thing, all you do is tighten this nice and tight right here, and
this will now keep this angle.
And if you don't have calipers, and you're just gonna use a good old fashioned ruler,
make sure that you measure the inside of one side of the pot to the other side of the inside
of the pot.
For me, it's about three and a half inches.
And I'm either gonna write this measurement down right here, or I'm gonna keep it in the
back of my mind, where all of my anxiety exists.
Now I personally like to throw my lids off of humps like this, but that requires that
you learn how to throw off the hump.
So if you can't throw off the hump like we did when we did the video on how to make lids,
you can always just make it straight on the wheel.
Potter's cheat code!
What you can always do is put this X right in the middle of your lid, and just tilt one
side downwards.
If my wheel is spinning to the right, I'll tilt my right side downwards, and if it's
spinning to the left, I'll tilt my left.
Right now my wheel is spinning to the right, so I'm just gonna go ahead and put my calipers
right in the middle of my lid, and tilt it a little bit downwards.
Just like this.
This is going to make a line in my clay body, and I no longer have to keep my measurement.
This is now where I'm going to make the drop-in piece to my lid.
And there you go, you have just made your lid for your teapot on the wheel.
Remember to always double measure before you actually take the lid off of your wheel.
Remember, measure twice, cut once.
Now with the handle, I have one of two things I like to do.
The first thing is to pull a natural handle as if you were making a mug.
The second and easier thing that I like to do is just to make a little tiny spire on
the wheel, and just attach it right to the side of my teapot.
This requires very little work, and you essentially only have to center your clay.
And there you go, all you have to do is take this off the wheel and leave it in one big
giant whole piece.
You didn't even have to open this up like you usually do when you center clay.
Hold on, I want to give it a little bit of swag.
Oh, there we go.
I like this technique a little bit more because if you don't know how to pull a handle, or
you're not too comfortable handling a handle, you can essentially just center a little bit
of clay, choke it in the tiniest bit, and then take it off the wheel.
You really don't even have to form it this well.
You can essentially just make one giant cone, smush it down a little bit, and call it a day.
Yeah, but you're going to have to learn how to pull handles sooner or later.
Do it!
Now this is the one new part you have to learn, which is throwing the spout.
The spout is incredibly easy, but it needs a little bit of time to dry, so you have one
of two options.
You can either throw it off the hump, blow dry it, maybe even put a fan on it a little
bit, and then take it off, or you can throw it straight on the wheel head.
Today, we're going to be throwing it straight on the wheel head, but the process is still
the same.
First step, as always, is to center your clay, dig into your clay body, and go all the way
down to the wheel head.
Don't stop.
You see that?
We dug all the way down to the wheel head.
Don't stop like you would with a regular pot.
Make sure you go all the way down, because this is going to be the hole in which your
tea comes out of.
You're going to make a tiny little cylinder, just like this.
And when you're done, you're going to choke this cylinder in as tiny as you can, just
like this.
Put one, two, three, four fingers, and just squeeze in and up as you come in.
And just cut off this little bit of wiggle right here.
Potter tip!
I'm going to choke in for a second time, as is usual.
But the second time that I choke in, I'm not going to start way down here.
What I'm going to do this time, is I'm going to stick one of my fingers way down there,
and kind of push out the belly, just like this.
This is really important, because it makes a little tiny air bubble for your liquid to
come out of your teapot, and it makes it look really nice later on.
Just trust me on this one.
You're just going to stick your finger in there, make it real wet, and just push out,
just like you were making a tiny little bowl.
Just like we did when we were making our vessel for our teapot.
And now when I choke in, I'm not going to start way down here, I'm going to start way
up here, because I don't want to mess up that little bubble I just made.
And I'm just going to cut off the skirt right here, like we usually do.
Don't go too far in, because you do have to remember, you've gone all the way down to
the wheel head.
So you have a lot less clay down there to dig into.
And of course, I'm always going to smooth it out with my metal rib.
There we go.
We have our first little spout.
Potter tip!
If you still want this spout to be a little bit longer, but your fingers are a little
too big to stick in this hole, you can always get your pin tool, make sure to get your pin
tool nice and wet, and stick it right on the inside of this hole.
By sticking it on the inside of this hole, wetting the outside, you can very easily start
to pull with your pin tool.
It takes a little bit of practice, but this is a way to make sure that you have a longer
spout.
Now this is the final component you're going to need to put together your entire teapot.
You are done now.
You essentially just have to put all the pieces together.
But with this piece comes a little caveat.
Let this bottom part right here dry a little bit before you take it off.
You can either use a fan or a heat gun, and make sure it doesn't dry too much.
I would say maybe somewhere around two minutes if you're using a heat gun, and about ten
minutes if you're using a little fan.
But make sure this dries, because if you try and take this off the wheel right now, it's
going to get super wiggly and flop down everywhere.
Or you can just do it anyway and be really, really careful.
Can I do it?
Oh!
Yeah!
We now have all the components to put together our teapot.
Now all we have to do is wait for them to dry a little bit so we can actually handle
them and put them together.
Usually I throw my lid and my teapot base first, and then I'll make all these components
later.
They're much smaller and they take much less time to dry than the big stuff over here like
this.
So this will take probably about two or three days to dry under the covers, while these
take about one or two hours to dry if you just let them air dry.
So we're going to wrap these up and open them up again in a couple days.
Later.
Okay, I think these are dry enough to trim now.
Oh yeah, these are ready to go.
Do you guys remember earlier when I said that a teapot is nothing more than a jar with a
couple attachments on it?
Well, at the moment we're just going to be working with the lid and the jar piece itself.
The rest of these attachments right here can pretty much go wrapped up to keep them nice
and moist and able to be attached.
Let's begin with trimming the bottom of our pot right here, because every pot deserves
a nice even clean bottom, and we're not savages.
Now this is my favorite part because if you do this part correctly, all you really have
to do is tip this right side up, center it.
And if you did your measurement correctly, your lid will fit right on the top of this
right here.
And you don't have to center this on the wheel by itself.
You can just put this on the very top of your pot and trim it just like this.
And there you go, you have a really nicely trimmed lid.
Now if there's anything you want to do to this lid before you finish this process, do
it now.
That includes adding a little handle to it right here, or if you want to chatter the
top or you want to put some slip on it, I suggest you do it now, because after this,
you don't really need to work on this part anymore.
You're essentially done with this lid.
For the rest of the process, you're essentially just going to be attaching things to this
pot right here.
This is turning out pretty good so far.
Potter Tip!
So far we have essentially just made a jar.
You can essentially just put that in the bisque, glaze it, and it would just be a jar.
But if we're going further to make a teapot, we're no longer really going to need the wheel.
So we're either going to do our stuff on the wheel and use it as a table, or do it on a
nice flat table.
Either way, I highly suggest you put something soft down, like a towel.
This used to be an old Power Rangers towel, until time took it away from me.
If you remember, we made two different types of handles.
I like this handle personally, but if you did go this route, you're going to attach
this just the way you would attach it to a mug or a vase for your ears.
You can very easily just score and slip both sides, just like you were attaching it to
a mug.
Find the space on the pot in which you find it most comfortable to hold, let's say it's
right here.
Mark this space right here, and mark this space right here.
Score this up nice and neat.
Add some slip right here, add some slip right here, and just mash these two parts together
like hormone filled teenagers who don't really know what to do with the parts, but they're
going to mash them together anyway, and of course we want to get rid of those seam lines.
We don't want to leave all this glob here, so we're just going to take our brush or our
fingers and just smooth this part out right here.
I know I keep saying this, but this is essentially the same exact process you're using to attach
this handle right here to a mug.
It's the same exact thing with attaching it to a teapot.
Oh, is that why you taught us how to make mugs before teapots, Dante?
You're dang right it is.
I'm not really partial to this type of teapot with this type of handle.
I personally like to have that rounded piece on the side, so I'm just going to rip this
I personally prefer this type of handle right here, the knob.
Now if you're choosing to attach this type right here, it's essentially the same exact
thing.
The only real difference is you're going to need a lot more scoring and slipping on both
parts of the pots.
This here is a fairly large hunk of clay, and because of that, if I push a little bit
too hard, it's essentially going to mash in the walls of my pot right here.
To stop this from happening, what you can do is put your hand on the inside of your
pot, push from the inside while simultaneously pushing from the outside.
This will keep a large amount of pressure even and right in the middle of this pot right
here instead of just mashing in your walls.
Good.
Now all we have to do is make sure that we get rid of this mess here and bind the clay
together nice and neat.
See?
There you go.
Nice and attached.
Now comes the fun part.
Let's talk about the spout.
Now there's a couple of things you're actually going to need to attach your spout.
You can use a hole maker if you're lucky enough to have one of those, because you will be
making holes in your teapot in order to use them as kind of a built-in filter.
It also doesn't hurt very much to have yourself a sharp little scalpel or some type of knife
tool.
This helps a lot as well.
But if you don't have either of those tools, a potter's knife will work just fine.
This one knife here will do the same job that those two will down there.
And this comes with every potter's tool kit that I've ever seen sold.
So you should have one of these.
This is basic.
If you don't have one of these, you go get one.
Go get one right now.
This is the most important part of attaching your spout.
You remember last time we threw this and we dug all the way down to the bottom?
Well, that was for good reason.
Where you place this spout is exactly where your water is going to come out of.
And this is an extremely important thing, because that means if you place your spout
way down here, the highest water level that your teapot can now hold is pretty much right
up here.
Anything above this, and gravity is just going to take all the tea, water, whatever you choose
to put inside this pot, all the way down.
You're not going to be able to put very much liquid inside this teapot right here.
A general rule for teapots is that you put it right on the shoulder, right here.
If you put it way too high, the water's not even going to reach up here, or you're going
to have to fill it over the top right here to get any liquid out.
Not to mention if you did put it all the way up here, you would essentially have to tip
the teapot all the way upside down just to get any water out.
And at that point, you might as well have a pitcher.
So as a general rule for most teapots, you'll find that most potters put them right on the
shoulder, right here.
But Dante, that looks way too big and bulky to just put on your teapot and attach it like
you did the handle.
Don't we have to cut part of it off first?
Yeah, I'm getting to that.
Hold on.
You see this spout right here?
When you're done attaching this spout, as a general rule, the top of this spout should
be reaching or level with the very top of your pot right here.
Do you guys remember that foreground trick I taught you when we were attaching ears to
vases?
Well, we're essentially going to be doing the same exact thing here.
Go ahead and take your spout and put it right behind your teapot.
Just like this.
This is how you're going to decide your cutoff line.
If you choose to put it right here, you can very easily take a tool and mark it right
here and make the cutoff line right there.
Even if you unwisely decide to put it way down here, you can always put this right behind
the teapot, use that visual perspective, and just make the cutoff line right here by tracing
it right along the body of your pot.
But of course, we're not savages, so we're going to put it right on the shoulder where
it was meant to be.
Now that I have the angle that I marked it at, I'm just going to go ahead and take my
potter's knife and cut that part off.
Now that we cut all the excess off, it should fit very nicely if we cut it at the right
angle to our teapot.
See?
Just like this.
Potter tip!
Some people would just make a giant hole right here and attach this straight on like this,
but I like to make a built-in filter to my teapots.
So I usually trace mine out like this before I go any further.
Go ahead, you make sure you put your spout on the shoulder just like this, take your
potter's knife, and just trace all the way around where the teapot spout is going to
go.
Now, if you have a hole maker, this is going to be fairly easy for you.
Simply take your hole maker and make a bunch of little holes inside this circle right here.
But if you don't have a hole maker, you can simply take your potter's knife and drill
little tiny holes into it just like this.
Don't worry, they don't have to be evenly set or anything.
No one's ever going to see them again after you put this spout on right here.
They only need to have full access to let the liquid fall through this spout.
And from this point on, attaching the spout is pretty much just a case of what angle you
put it on at and scoring and slipping.
Keep in mind that before you attach these two pieces together, this is your last chance
to clean out anything on the inside of here or on the outside of your vessel where the
holes are.
So make sure you take that opportunity to go ahead and clean out the inside of your
spout and any excess clay on the outside of this pot where the holes are right here.
Because if they get stuck in there, you're going to notice it when you pour your tea.
Potter tip!
When I was learning how to make teapots, my teacher always told me that I can easily take
my finger and make a little air hole right here on the bottom of my spout.
All you have to do is wet your finger and push very gently right here at the very bottom
of what would be the gully.
Right here.
And you can kind of see the clay being pushed out just like this.
This helps make a little air pocket so that the water or the liquid inside your teapot
can get out a little bit easier.
Kind of like when you drink out of a coffee cup and the hole's not big enough and you
don't get that extra air flow and your liquid comes out extra slow.
This will give a nice little air pocket so that the liquid comes out at a good rate.
And there we go.
That was actually pretty easy.
Final potter tip!
Because I know I'm giving you guys way too many potter tips.
When I was first learning how to make a teapot, my teacher gave me plenty of tips on how to
make the water easier to come out of the spout.
That's the difference between a functional teapot and just something for aesthetic purposes.
Along with the built in filter and the little gully right here to make an air pocket so
that water can easily come out of the vessel if it's too airtight, there's one final thing
he taught me.
And that's to make a channel inside of the spout.
This makes it extremely easy for the water to come out on one basic little channel that
you're essentially going to funnel on the inside of the spout right here.
And it's fairly easy to do.
Go ahead and get the non-sharpened part of your pin tool right here.
You can also use a brush as long as that brush fits inside the spout right here.
Get it just a little bit wet and stick it on the inside of your spout and push it down
a little bit while running this back and forth just like this.
I know it looks super weird.
Don't worry about it.
Just do it.
Now do you see that inside there?
That is the little channel or tunnel that you've essentially just created all throughout
this spout right here so that water comes out nice and smooth.
It's part of the functionality of a pot and it's really nice to see whenever you pour
out hot tea that it comes out in one nice smooth waterfall.
Just got to put the lid on now and we are pretty much done.
And there you go.
You have just made your very first teapot.
You got a built-in spout in there.
You made the little air gully.
You made a nice channel through this right here so air pulls out.
And you have a nice tight lid as well as a little handle right here so you can just turn
it with your wrist and pour that tea right in there.
Well thank you Dirty Potters for joining me today.
I know this is a difficult form to master simply because you're essentially just making
a jar and then learning how to attach a spout and make a filter on the inside.
But the rest of it is pretty much making a jar and putting a handle on it.
You really only have to learn how to do this part right here.
I really hope my explanation of how to make a teapot from an actual jar form is really
helping you guys out and those extra little filters in there that really make it craftsmanship
versus just a regular old teapot that looks nice.
If you'd like to see any of my artwork, the links are always down below for your beautiful
potter eyes to see.
And if you'd like to join the Clay Community on Facebook, there's tons of potters there
that are always willing to help you.
I hope you guys have a good day and I will see you Dirty Potters next week.
Yeah that's right.
I do off-camera stuff all the time without telling you guys.
Deal with it.
