How to Make a Treehouse Part 1 | I Like To Make Stuff

Beautiful Tree House
153 followers
6 Video Views·Sep 17, 2024
Hey, I'm Bobby and I like to make stuff. Today we're going to start building a treehouse!
We've been in our house for almost two years and pretty much every week of those two years
my kids ask me for a treehouse. So we're finally going to get started on it. This is going
to be a two part video and in the first part we're going to build a big sturdy platform
and the second part we'll make it look really cool. We're going to put the treehouse right
up here. Many years before we got here this tree got hit by lightning and it killed a
bunch of the branches right in this area. But luckily that gives us a really good spot
to put the treehouse. I've got a blue line marked, that's where the platform is going
to be, but first I've got to cut out the dead stuff. I'm going to do my best not to cut
out anything that's alive if I don't have to. Luckily all this stuff is dead and it
hasn't been messing up the rest of the tree so I'm just going to get rid of the things
that are kind of in the way so we can have a place to stand. We finally got all the dead
stuff cut out of the tree and now it's time to start building. Now when you build a treehouse
there's a bunch of different ways to do the platform and a bunch of different ways to
attach it to the tree and it really depends on the tree that you're working with and where
your platform is in relation to it. Ours is going to be attached to the tree on one side
and going out. So to attach it we're going to use something called a tab. So this is
a treehouse attachment bolt and this is the standard for attaching treehouses to trees
at this point. Basically you drill a hole through the bark into the wood and then you
screw this whole thing in, then the weight of your treehouse is sitting on the part that's
exposed. This is definitely the safest option for a treehouse and the healthiest option
for the tree itself. This video is sponsored by Lowe's but this is a specialized item that
they don't carry, in fact most people don't carry them. I had to find these online. I'll
put a link down in the description to this hardware and that website also has some great
videos on installation. Now that we got the first tab in we're trying to find the spot
on the other side and make sure that those two spots that we're going to drill are parallel
to each other. So we've got two levels here and as long as both of them are level we should
be able to do a little bit of math and figure out where the center of that other hole should
not too big of a deal. So now we have to drill two holes in the ground for posts. One here,
one about 12 feet over there and those posts are going to support this end of the whole
platform. Now this ground is red clay, it's got a ton of rocks in it, so to drill these
holes we rented an auger. After a lot of work we got the holes just deep enough before we
started hitting rocks so we're good to go on these. To figure out the size and the depth
of the hole for your posts you need to know how much of the post is going to be out of
the ground. There's some calculators online that will help you figure that out. We've
got ours ready to go so now we need to set the posts and pour some concrete. We got the
first post stood into place and got it locked in so it's level in both directions. Now we're
going to put in the second one but we have to make sure that the front faces of these
are co-planar and both of those faces need to be parallel to the tabs that we put in
the tree. So to try to do that we're going to screw in a 2x4 on these front faces to
going to continue to work on it but we've got to figure out where to cut off these posts.
So we need to find the line on these posts that is level with the tab on the tree. The
best way to do it is to run a really tight string between them and then hang a line level
on that. It's a really lightweight little level with some hooks on it. I can't find
mine so instead we're going to use a beam and set it on here, run it across, put a level
on top of that and then mark the post where we need to cut it. So what we're doing here
is cutting off the top of the post and then on the top of that cut we're going to be putting
the actual beam. This piece that's here is still just to hold these two together and
make sure they're on the same plane. But after we get this cut off we're going to be setting
a big thick beam on top of them between them to tie them together and support the load
of everything else. This is the piece that's going to connect the beam on top of our post.
It just goes down like this, you put in some screws in three places and then it's got a
slot right here to accept the beam. And the beam is going to be made of two 2x12 sandwiched
together. We'll make that now. Of course I'm using pressure treated wood for this because
it's going to live outside and I want it to last as long as possible. Okay so those screws
tie this into the beams. Now there is still a danger that this thing could fold over forward
in case there were a lot of load on it because it does have a pivot point on the bottom right
in the center. So to try to work against that we're going to use these ties and we're going
to put them around to strengthen the joint further up and further down on this. If we
see over time that it's starting to loosen up we can always come back and put a big gusset
on the front and the back side to make this even stronger. Right now is actually a really
good example of a windy day and so we're watching the tree to see how much it moves because
your specific tree is going to move differently depending on how high the winds are. I've
watched this tree in much higher wind than this and it really doesn't move very much
down here. Up at the top it moves a lot but that's not really what we have to worry about.
So when you pick out your tree that you're going to be working with make sure that you
look at it in all sorts of different situations and figure out how much the tree moves so
you can know how long those tabs need to be and how much gap you need to put around
the tree to keep it safe. So next up we need to tie this whole assembly to the tree and
to do that we're going to put some more 2x10s on the back side of this beam going back and
resting on the tabs. Now this is going to be connected to this beam using these hangers.
These are going to go right in the face of the beam. The joist is going to sit right
in here and then it will be nailed in all these places. Actually I want to point out
that I'm using screws instead of nails just because that's a preference of mine. But most
of these hangers are made to have nails in them so that the head of the nail will be
flat against this material. You can see here why we use the tab. It keeps this piece of
wood separated from the tree so that it's not rubbing on the bark and that's going to
keep the tree healthier for longer. Now there is a piece of metal that often goes with these
and it's a little capture piece that goes around the tab and attaches to the bottom
of the piece of wood that allows it to move a couple of inches in this direction but not
freely. Now in our case we're going to be tying this whole thing together so that particular
piece is not really necessary. Before we move on though I wanted to add one more thing.
I took the offcut from this post and put some 45 degree cuts on the end and this will be
a knee brace that will go right here and once that's in place it will stabilize this entire
structure in this direction. It makes a huge difference. It's like way better than I would
of those three pieces is to stop these two long ones from separating. That keeps them
in the same shape relative to the beam and relative to the tree. Next up we're going
to add a diagonal piece between this corner and the back corner on the tree and to do
that we're using these joist hangers. This is made for 45 degrees so we're going to drop
the piece down in here and then bend it just a little bit to get a little bit more angle
out of it. We're going to do one over here and one on the other side and that will give
to put the joists on top of this whole structure and they're going to be faced this way going
all the way down 16 inches on center and I've already marked from this front edge 16 inches
all the way down. So on the top of those marks I can take these hangers and nail each one
put up but the joists are not tied in yet and that's because I don't know where they
need to go left or right on this plane. So to figure that out and figure out how to cut
them we're going to run a line of string from the front corner to the back corner and then
that will give us our outside edge and we can line up the pieces before we nail them
in place. We snapped the chalk line from this corner to the back corner so now we have a
line down each one of the joists and then Josh took the speed square and drew that line
down the side so when I cut that with the circular saw I've got a straight line to follow.
Now we also measured this angle of each line on the piece of wood with the speed square
so that we made sure that the angle of the saw matched. If you don't know how to use
a speed square they're super handy and we have a bits video all about all the different
things you can do with them.
And with that piece we have the platform completely finished. Now it's been really rainy and really
windy for a few days and it's been great to be able to stand up here and see how this
thing behaves with high winds, see how the trees moving, see how stable it is. Now I'm
happy to report that this thing is very stable, it's not rocking in any direction. Now that
I'm happy with the structure we've got to cover it with decking. I wanted to point out
that we had to buy a whole bunch of decking and this whole thing is sponsored by Lowe's.
If you don't have a way to get a bunch of decking to your house you can actually buy
all this lumber online on Lowes.com and they'll deliver it. It's pretty cool.
To lay down these boards I'm just going to make sure that they are perpendicular to the
joists. And to do that the easiest way is to have a speed square, lay it right here
and then line up the outside edge. I'm going to start and do that on this back edge making
sure that it's laying right on top of this joist. And once I get one of them screwed
down I'm going to take some nails and put down in between and put the next one up to
it and just use these nails as the spacer. That gives a little bit of room for expansion
it into place but this line is going to have to move out further from the tree so that
the tree has room to move around. So once we get all these pieces in place I'll come
back with a jigsaw and cut a nice big even curve all the way around the tree. This is
the gap that I've got here in between the tree and I'm going to kind of copy this gap
all the way around. So I'm just going to make a really simple little scribing tool. I'm
going to just put a pencil next to my tape measure, tape it all together. And all that's
really doing is giving me an offset from the tree. So now I can hold it away from the
building other stuff on top of. Now like I mentioned before, the individual specifics
of a treehouse really have to do with the situation you're in, the trees you're working
with, but essentially this is a deck. You just have to figure out how to attach the
deck to a tree. So if you get into a place and you're not sure how to do it structurally,
look at how decks are made and some of the different ways people attach them to trees
or houses or other structures. So next up for this project, we've got to add a way to
get in and out of it. We've got to add some safety railing around it. And then we're going
to add some fun stuff. Make sure you subscribe so you can see that second part of this project.
And big thanks to Lowe's for sponsoring this entire build. We've got a whole bunch of other
projects that you may want to check out. So be sure to check those as well. That's it
for this one. We'll see you next time. And it really depends on the platform type that
you're... Wow. That's fun. I got sap on my shoulder again.
