I BOUGHT A 42 year old BRONCO! They RIPPED OUT THE EXHAUST!

RetroCarz
284 followers
How about you? I'm Hank. Welcome to Hamiltonville Farm. I'm going to do some work on the Bronco.
We're going to take it up to the upholstery shop and get the seats reupholstered or drop them off.
Now I'll say this the guy said that it's going to take four to six maybe even up to eight weeks to
get it done so I'll talk to him. I'll show you this when we get there but I'll see if he wants
me to leave the driver's seat or bring it back later but at least we'll have a seat to drive
around in. Zee wants the aluminum diamond plate running boards off of it so we'll take those off
and we'll get a little more nitinoid stuff done. Maybe get some exhaust done in this video. I'm not
sure. I've got to order the exhaust. Maybe by the time it gets here we can put it on the Bronco
but let's get down the road. Let's get the seats to the upholstery shop. I may talk to him about
carpet too but they may just have they may make like molded carpet that I can just buy and put in
myself. You know what I mean? I'll check that out. LMC has a bunch of stuff. It's got a leak in it
somewhere. It rained hard so where is that leak coming from? I'll have to figure that out because
he told me it was on this side. It must be on that side. All right we'll have to figure that out. You
shop. Remember when you crank this thing you got there's a sequence of events you got to go.
Let it warm up just a little bit. It sounds good. Let it warm up just a little bit and then we'll
get down the road. I'm just glad the AC works in this thing. You know what I mean? If the AC didn't
work we'd be in trouble. While we're letting it warm up take a gander at Hamiltonvillefarm.com.
Buy you a new hat, a new shirt. It's pretty awesome. I really like these new hats with the
charcoal gray and the safety yellow. I like them a lot actually. They're pretty nice.
All right let's get down the road.
All right we made it. Hey Mr. Hardy how are you? Oh I'm good. Good. I found the hot part of the
morning. Yeah that's right. That's exactly right. Back here Mr. Hardy at the upholstery shop.
I'm gonna go over with him exactly what our plans are and show him some pictures and stuff and we'll
go from there if that's okay with you. I need your help just a little bit. Okay. The track is
broke on this so I'm gonna press the button if you'll help me. Yeah if you don't mind and we'll
get this bad hammer knocker down here. A little bit on the driver's side. I think you'll just
have to figure it out. Yeah all right it should. I'm sorry. Yeah all right it should be trying to
trying to work. Yeah let me see if I have to. I don't think I have to crank up the trope.
All right let's try that. There we go. Yeah all right let's show him some uh
and now when we get done I'll ask you to help me pull it back up too. All right teamwork makes
a dream work. Let me show you some pictures of what she sent me or would you rather do this in
AC? Either way. This is what she sent me. It's like a brown leather but we can get a faux leather.
Oh yeah that's it. Get this in a this is a chest nut and there's a beach nut which is a lighter
lighter tone than that. Yeah yeah just a lighter tone I think not maybe not this light.
Right yeah. Yeah that'd be awesome. Man you do good work man look at that that's fantastic.
Yeah that's for this is what it did look like. Oh wow yeah oh yeah look at that. It just started to
yeah yeah yeah this is the couch that was the kitchenette for an RV.
Yeah you see I got two different ones. I have to wear stronger ones when I sew. Yeah okay this is
the chestnut. Yep. And see we've got this bittersweet and this beach nut which are
not tan like that. I like the beach nut. That's kind of close. That bittersweet
give you that that oranger look. Yeah. And this is fairly accurate I mean you can see
it's a little bit darker than the than the actual. Sure. Let's see if I can whiten it up. Yeah that'd
be great. But uh but it's real close. Well maybe the bittersweet. Yeah that's what I was thinking
that looked like bittersweet. Yeah. And you see it's almost got the same that actually may be the
same material. Okay. It's hard to tell looking in there that is a horrible upholstery job.
All of these. Yeah yeah yeah. All right well let's go with bittersweet. All right. And uh
I'll go from there. I wasn't quite ready. That's all right. Which I never am. Well let's uh. Started
Yeah that's right. Well hey so you got to start. The the important thing is starting. That's right.
So um I got a question for you about the uh so we took out the passenger seat and the back seat.
Right. Can I can I bring the driver's seat when it's getting close to you finishing up all three
seats? Absolutely. Okay cool. That way I don't have to drive on a milk crate. We talked it's
going to be in September before I get started. Yeah yeah. Maybe the end of October. Yeah that's
what I was telling these guys. You told me it's six to eight weeks. Yeah. So yeah I'm more than
happy to hold the ones you've got. Okay. Wait for the other one or. Okay. Oh I can leave it in there.
I can leave it in the truck. That's fine. Actually it would be best if I went ahead and took them.
Okay well I can do that too. What I can do is measure. Sure. That way I know what material I
need so the sooner we're ready to start. Yeah absolutely. Yeah yeah no problem. We can do that
for sure. Which one did we say? Bittersweet wasn't it? All right let's get these bad
hammer knockers out of here and we will uh get to work. I assume we'll make a perfect kit.
Yeah so when you start on those just call me and I'll bring the other one. This should be the same.
And we're just going to go one fabric one color. That's it. Yep. That makes it much easier. Yeah.
Well not any easier but uh simpler. Simpler. Yeah. Less to think about. That's right. All right.
Yeah I think everything will be be good. You've already checked the foam. Yeah. We've got some
damage there and I think the other one has. It does. It does. Which is no big deal. Closed cell
open cell. You was telling me a little bit about that last time. Yeah that's what I keep all my
scraps for. Yeah. Filling uh filling or making little pieces like this. Right. Right. Cool. I
buy it in bulk and make larger things. Cool. All right well look man we're gonna I got some floor
boards today or some running boards to take off and uh anyway he'll call me when he's ready. We'll
bring the other seat in and uh let's go take those running boards off. All right I got got got Mr.
Hardy helping me do one more thing here. All right here you go. Ready? Yes sir. All right. All right
there you go. That's it. All right. Yeah it's got a it's missing it's missing a bushing on that track
and uh so I gotta buy a bushing for that. All right fellas let's go take some running
boards off. Mr. Hardy I appreciate you buddy. Thank you. You have a wonderful day. All right take care.
Back at the house. Should be pretty simple to remove these. One two three four uh there might
be several along the bottom here but we'll figure it out. Five six seven eight. Who do we appreciate?
And then let's see if the exhaust is. We might have to do some manipulating on the exhaust. Oh
yeah there's there's all kind of I hope I can get in there and get all those out of there.
All right let's make a half cap. Great there's nuts behind every one of them.
Not fun. Okay she says she don't want running boards. I think it looks pretty good without
them don't you? All right let me go do the other side. We'll take these off and move on to the next
project which is the exhaust I think is going to be next. Let's take these off right quick.
running boards. What do you guys think? I mean obviously the exhaust ain't gonna be like that
here in a little bit but I think it looks pretty good. Well the girls finally showed up so what you
doing? Nothing just gonna go. Yeah make it happen. Make it happen. Yeah they're excited. They got
their driver's license now so y'all been burning their roads up. Oh yeah yeah drove here this
morning. So we'll finish getting the exhaust off and we'll get that relay for the fuel toggle switch
I think is what we're going to try to get down in the video. So let's get the Bronco pulled over
here and get the exhaust taken off. All right so somebody just pull it up beside just pull it up
beside my truck and we'll get underneath it and get the cutting on it Camo. There you go. We're
gonna try to take care of that today. All right you may have to pump the pump the gas. All right
try that. Press and hold the gas. You don't have to hold the brake on this one. You don't have to
I'm gonna catch me laying on that. Yeah it's either that or the dirt. Take your pick. Where's
your little rolly thing at? It won't work good with us gravel. Yeah that's exactly why I'm not.
You see that spider right there? Just crawled out of it and I'm doing those speeder in days.
Help me spread this out over here. What are you doing? I feel like that's not a good spot for exhaust.
We're gonna pull it up toward that front tire will you? Because we're gonna be working right
here at the back of these headers. It's not very uh spread. You're in good shape.
You're in good shape. If you look under here we're gonna cut these we're gonna cut these off here.
All right and these are just hangers and we're gonna order a exhaust from here back and then
there's two bolts. I think it's two. Let's see. Yeah right there and there. Yeah one two it might
be three. Yeah there's three bolts. All right so we're going to take these three bolts off on each
side and then it'll just come off. Actually you know what? I don't think we got to do that.
I think we can just take these off and it shouldn't be able to slide off right here.
So we can take these off. We take this one off first and then if that don't work we'll
take this one off. Easy cheesy lemon squeezy. Yep that's definitely how that goes.
All right so who wants to get this personal over here? Z would love to do that. I just would love
to lay on the ground. Actually you know what? I'll do this side. You do this side? All right.
If you give me something to do with. Yeah hold on a second. Let me turn off the
cellular telephone device here. Let's get you some. Let's get you some
sockets. Some deep well sockets. Do I have deep wells up here?
Throwing that money around. I bought some deep wells but I don't remember
where I put them. That's awesome man. That is awesome.
Uh I don't know what size they are. We'll grab a couple.
So see if one of those get up in that mode.
We're gonna do this. Yeah there you go. No. Is that too big? It might be too big.
Nope. Probably not huh? Yeah it's whatever this. Yep. Yeah all right so let me get you.
Let me get you an impact here so you ain't gotta actually do any work.
She clean.
I'm thinking about selling my truck by the way. Where's the air compressor?
Really? Yeah. Why? 2016 4500. It's a bad hammer knocker. It's a bad hammer knocker.
With the air compressor, not the tools. $45,000. So if you guys are interested let me know.
The one and only Hank Hamilton. That's right. Owned it. I'll even sign it for you. That was good.
We'll put some pb blaster on it and then um
I'll leave a link in the description for you to buy your pb blaster with. Don't get it in
your eyes okay. It is not eye friendly. There you go. Push it all the way over. Good job. All
right. Don't forget you're gonna, you might as well get that top one too in case we need to pull
it off. Oh there's another top one on this. No the other u-bolt. Oh. No not that. What? This? Oh.
Come on dad use your brain.
You got big brains. Oh it got on my arm. Look go hit that other side on that side. You got a towel?
I don't want pb blaster on my arm. If I'm putting on this. All right girl are you ready?
Is it on there? Sure thing. Yeah.
Ow I hit my noggin. That's not the right side. Hold on. No this thing too big.
So pull that collar. You got to pull the collar here. And twist it. Yeah you just pull it.
Not push it. I know. You ain't got no boot. Oh never mind. Pull it out.
Ain't got no what Z? Blue rag but I got one. Yeah you got it. Lay into it girl.
I don't think it's doing anything. Well that's because you ain't laid into it.
It's moving. It is? Yeah. Don't be scared. It's not getting on there son. It is.
For that bad hammer knocker came out.
So now just yeah just kind of there you go. Your aim sucks. I've hit it every time.
We're gonna roll the footage back and see. All right let me see what you got here.
Yeah that's probably the only one we need. Z watch you get the next one.
You think? Yeah I think. I don't I feel like I'm not sure we we needed to do this.
We're about to find out. All right lift that up please.
There you go. So you've done that start with huh? All right. Told you. Told you. That's why you're
the lead mechanic over here. I know. Okay let me get the uh where's those bolts I just took off
and we'll just take the other ones off the same way on the other side.
So Z get your get a nine sixteenths uh get a nine sixteenths socket.
Thank you. This is an exhaust flange and then hey dub on the inside that door right there
there's a tape measure. We need to measure we need to measure this and see if it's two and a
half or three inches because that's going to determine um that's right here dub in my driver's
side door inside the door there should be a blue and black tape measure. Yeah I'm just gonna hand
right back to you okay. Thank you. Okay so it's a three inch yeah well it's two and a half.
I don't know they go with inside diameter or outside diameter it's two and a quarter inside
three I think it's three on the out. That was two and a half exactly in three. Yeah so I'll find out
if it's ID or OD inside diameter or outside diameter. What you say girl? This looks like
the only one I can find. Let me see yeah so I mean that worked look we need to get um
all right now um Z you need to come do this one. Do you want me to? I will. Actually well I don't
know where you are. I'll try to get all the dirt out for you first. So you pull that collar. Yeah I
guess it's on but why is it not going?
Okay. All right so what you're gonna have to do is put the impact on whatever side you can
make it fit so I think it'll fit on the bottom if not we'll have to just use the
the wrench. Yeah slide it up there. No let's see. I might work on this. Okay yeah get what you can.
All right when you hear that you know you're off of it. But can you come on this side?
No turn your turn your wrench around and put the socket on the bolt head. You're a bolt head.
Yeah there you go. All right so that won't. Is that tightening or loosening?
Okay let me see. I can't see if that's on there or not but.
All right you can run out. You should be able to run that off with your fingers. You got it?
You got it? You got a headache? What do you got a headache for?
All right we're gonna need two. Now see if you can put. Will this fit on there now?
That way? And I'll hold this side. Come on. All right I'll get another wrench here in a sec.
All right see if you can pull that. Can you reach that? I can't reach it.
Can you reach that wrench? Yeah pull toward you. All right there you go. Maybe I'll catch it just
enough. See sometimes you can just grab it just enough. All right pull this off. There you go.
Just like so. Come on. This one's still attached. Yeah all right so we'll just go ahead and take the
wiring off there and we'll drop it down real easy.
The hangers as they say. I had some snips but we can just not loosen them. It's no big deal.
If you'll pull that out please ma'am. You see what it sounds like?
It sounds like a race car now. You want to fire it up?
Because isn't this called like straight piping it?
Ready to go to O'Reilly's? Heck yeah. We're gonna buy probably a 30 amp relay
and then get the fuel toggle switch done. Come on. Come on. What about my merch? You guys should
definitely go buy it. It's pretty cool. Yeah got the new gray with neon yellow hats. The
Hamiltonville Farm shirt with the flag. Here I got you. Look at that. Oh yeah. So go to
Hamiltonvillefarm.com slash shop and grab you a shirt and a hat. We've only got a couple of
these left. I looked at my inventory the other day so there's only just a few left unless you
wear small. We got a few. We got a lot more small left but so buy a small for the son or daughter
or granddaughter in your life and let them wear a Hamiltonville Farm shirt. Heck yeah they're pretty
cool. Pretty cool. What do you think? Ready to get some stuff? So we're actually gonna so we're
actually gonna get the relay and some motor oil for our oil change providers. All right what you
got? I know we need W20 synthetic. W20. All right what's that say? OW20. All right so we're looking
for this right? So extended performance. Mobile one's good oil. No problems there. So you can put
that in there if you want. So it's uh five quarts which is probably enough. So let's grab that.
ZW20. All right advanced full synthetic. And it says look it's got NASCAR on it so it can't be a
bad oil can it? I know you drive like you're a NASCAR. And then do you know your filter number?
No? All right so we can google that. All right but what's what's important about the oil change?
We're gonna do it in me and Doug's own video. By yourself? Yeah. So if you haven't subscribed and
turned your notification bell on turn it on because they're gonna handle their own oil change.
I think we can do it. I think you can too. It can't be that hard. I mean how hard can it be? Didn't we do it in the square body?
Yeah it's not hard at all. You got this. You got this dog. Look this is the exhaust. These are what
we're gonna be putting on your truck right. So we can buy kits to build all this back you know.
Then like a muffler goes there. All that good stuff. So worst case scenario we come to O'Reilly's and
buy the stuff. But that's what we took off. That flex pipe stuff? Yeah. That's the stuff we took off.
All right let's look for a relay over here. Oh I'm sorry. 30 amp. 30 amp relay. Here we go.
What is this one? 5 pin 30 amp. This will probably work. All right back to the house. We got 77 dollars
for their oil, the relay, and some connectors. Which is pretty awesome. Listen Doug. I'm Doug.
Listen Z. You're twins. I always get it wrong. 50 something dollars for an oil change. Ain't horrible.
Yeah how much are they normally? Yeah well for my truck it's like
twice as much as that. Three times as much as that. It's three times as much as that for my truck.
Anyway let's go back to the house. You want to? We're back from O'Reilly's but I'm flying solo
the rest of the video. Unfortunately we had uh uh other girls had a family emergency that they had to
attend to. So uh on the my son-in-law's side of the family. So they had to go take care of that. So
just keep that family in your prayers for um the situation they're going through right now.
But I'll go ahead and I'll get this relay put in. So the fuel pump will be on a relay instead of a
toggle switch. And again it's just a Dorman universal 5 pin. I don't know if you could
went with a 4 pin or not. But pretty simple to wire up. So let me get that done now. Let's see
how this thing's wired in here. You know what I need for sure is my glasses. My goodness this
thing's getting old fellas. I don't want to break it. You know what I mean? So how's that? I might
not even have to take that phillips screw out. Yeah there we go. All right let me let me chase
some wires now. I can hear the fuel pump. When I toggle that on I can hear the fuel pump.
Around here and that should be constant hot. See if that's a good ground.
I hate these test lights. Ain't never had any of them work good for me. I need a bolt to
snatch onto. Anybody see any bolts I can snatch onto? I think that's too much
too much paint on that. Oh there we go good. Okay so that's that's the constant 12 there.
All right so that's what they've got that wired to. So I can come off that. That's not even fused.
Look at that. I can come off that for constant onto the relay and then ground it there.
And then that I just got to find a source so when the ignition is on.
Let's see here that's a 15 amp. Okay let me turn the switch to on to see.
All right the switch is on the run position. I don't know why these ain't.
Surely yeah these I don't know why I'm not getting any juice here.
There we go. Let me turn it off now. See if that's uh on the accessories or run position.
There we go. All right now let me turn switch off. Nope so that's still on. So now it turned on.
All right let's try that. That's still on. There's one up here. Let's try that.
Make sure that amp ain't. Make sure that fuse ain't blown but that's okay.
These fuses might be blown. You never know.
There we go. All right so we can fuse it. We can link it to this one here. That's a 20 amp.
That should be all right. All right so that's the one we'll go to. This one. All right let me get
some wiring hooked up. We'll use these. Get them connected. Get everything set up and shoot. What
you talking about driver cam on. Have this hammer knocker knocked out and the girls won't have to
worry about turning this toggle switch on. You guys left tons of comments about that by the way
which is a good idea. So we'll go ahead and take care of that. I wish I was good at electrical
but I ain't. All right we'll send the battery to 30. Pin 30 which is this one. All right
then we'll send a 12 volt switch to pin 86 which is this one. All right
then we need to pin 87 to the fuel pump which I think is this one.
And now I just got to ground it and I think we'll be good. All right I got everything wired up here.
Now I should be able to. I'm just going to stick this to a ground source just to see if it works.
So when I turn the switch on I should hear the fuel pump. Yeah I can't. I heard something clicking.
I hear the relay clicking but I don't hear a fuel pump. Let's test the lights here.
So this should be. It should be ground. This should be constant. It's on. Y'all see that.
Turn you off a little bit. Constant. Switched. Fuel pump. Oh it's not. Let me try to get better
ground. Hold on. All right I got the four wires connected here. Now I gotta dress it up but I've
got. I think I got. I think I can hear the fuel pump. Let's see. Yeah you guys hear that.
Hope that picks it up. Let's see if it runs. I think that's gonna be it. Let me cut it off and
see if I still hear it running. Nope just cut off. Y'all hear that?
Let me just cut it on one time to verify. Yeah that's it. Okay no more toggle switch for the
girls. I'm gonna bring them out here. They're in the house making phone calls and things like that
but I'm gonna bring them out here. So essentially what I did for the relay. It's a 30 amp relay.
I brought in a 12 volt hot source from the the battery side. Run it into the relay and then I
run a 12 volt power supply to the fuel pump on the run position of the switch. I grounded it and then
run the power. So you get the power to the relay. Ground the relay and then you get the intermittent
power to the fuel pump. It's four wires. Super simple and I'm not an auto electrician by any
stretch of the imagination. So if I can do it you can do it. I'll go explain to the girls what I've
done but right now they could care less to be honest with you. But it's okay. They're gonna
change their own oil. Zee was with me at O'Reilly's and she bought the oil and the oil filter. So her
and Dub are gonna change their oil but I'm gonna let them do it on their own. I'm not gonna help
them. I'm just gonna be the cameraman. So they probably won't get that done today but we'll get
it filmed and get a video out on that and pretty good. We're gonna buy some exhaust. You know make
your own exhaust type stuff. I think Holley makes like a Flowmaster modification kit that you can
get yourself or whatever. But I don't know. We'll see. Sounds pretty good without the exhaust don't
it? Come on driver. How about you? Anyway that's it. The toggle switch is fixed and now I'll just
dress up the wiring. You know tuck in all the wires to make sure they're secure and secure
the relay to the body of the Bronco or at least underneath. That wouldn't be the floor pan but
what would that be? The firewall? The back side of the front side of the firewall? Is that what that
would be? I'm digging this project. It's gonna be fine. Oh we got the seats taken. That was earlier
in the video. This video is taking about two weeks to film by the way so it's all over the place.
But we appreciate you guys. Watch this video right here. It's when we first bought the Bronco.
I think you'll dig it.
