Highly Experienced Korean Artisans Showing Processes BEST 4.

Native American Crafts
28 followers
6 Video Views·Sep 14, 2024
Hey guys, look what I made. It's an authentic choco cylinder jar, and I'm out here today to fire it whoa
Sorry about that everybody. This is one of those things I do every once in a while where I get the shot out of focus
I don't realize it till I get home
And I can't go back and reshoot it because I'm showing you the pot before firing and the only pot
I have now of course is the pot after firing so here's a picture of the pot before firing
This is what it looked like when I was holding it here, but unfortunately the whole shot here is out of focus
So let's go on with the video and believe me the rest of the video is in focus
But first I'm gonna take you back show you how I formed it how I decorated it and then catch up with me here
We'll get it fired and see how it comes out all right
When I started this project in the middle of June
Temperatures were still ramping up here in Tucson, but the mornings were still fairly cool
So I was actually getting up around 5 o'clock in the morning to work on this that way
I could be done by like 9 or 10 before it got really hot
Before I was done though. It was way too hot to work out on my studio, which is actually a back porch
So it's not enclosed not air-conditioned and so by the time I finish this project. I'm working in my house
Building a cylinder is not much different from building a round bottom pot except. You know you don't need a pookie
You just need a flat board
The biggest problem can be that first coil getting it attached because there's not a lot of clay there to kind of bond it into
Be really careful in the early days building pots like this
I often had problems where that bottom would after firing or during the drying kind of crack and want to come off
You've got to make sure that first coil gets bonded well as you coil up a cylinder the real challenge becomes trying to keep those walls
completely vertical not allowing them to kind of creep in or out and
Also the other thing that I get a lot of times is kind of a gentle undulation as the walls kind of
Gently ebb out and in where each coil is attached one of the things I do to try to prevent that is not used
Too big of coils so these are a little smaller than the coils
I usually use because I'm trying to avoid that kind of
Thickness in the middle of a coil and then of course being really careful to pinch them
Thin all the way through and you'll see I do a lot of that kind of vertical
Scraping up the side and that's real important because that kind of makes it even and straight
Archaeologist Stephen Lexan reported in his book the Chaco Meridian that Chaco cylinder jars average about nine and a half inches tall
by about four and a half inches wide and
This one that I'm replicating is exactly nine and a half inches tall by four and a half inches wide
So what I'm shooting for here is the average size of a Chaco cylinder jar and I'll talk more in a little bit about
The Chaco cylinder jars and kind of what they represent
If you're trying to keep the walls of your cylinder vertical
Then it's important to measure as you go to make sure that the size of your cylinder is not creeping out or in
So I know that the circle that I started with is a certain size
And I want to make sure that the walls of that pot stay about the same size
Here's a picture of what the pot. I'm replicating today looked like
the original this dates to between
900 and 1100 AD and this was found in room 28 at Pueblo Benito in Chaco Canyon
Remember that room 28 that'll be important later on
Now I'm gently compression pinching this cylinder to kind of bring it in because when I measured it was a little too wide
so just just gently bringing those walls in and
Then keep coiling because nine and a half inches is pretty tall, especially for something
That's only four and a half inches wide
So here you can kind of start to see that
Undulation I was talking about where each coil comes in just a minute while I clean the clay off my scraper
That undulation where each coil attaches you see that how it kind of comes in and out. That's really your enemy here
That's what you're fighting against and it's tough
So what I think the answer is a lot of vertical scraping long smooth vertical strokes on the outside and then carefully
Pushing out with like a spoon or something those in spots from the inside
At this point it's starting to feel really tall funny thing about making cylinders
When I'm forming them and I get to this stage, it always feels
Ridiculously tall then later when it's dry
It doesn't seem like it's quite as tall as it should be and I should have made it a little taller
It's like good grief. Are you really gonna add another coil to that?
Why yes, as a matter of fact, I am gonna add another coil
In fact, my measurements tell me I need one small coil more and I'll be where I need to be now
Remember when you're trying to make a pot, that's nine and a half inches tall
You need to account for the shrinkage of the clay. So I'm actually aiming for a little over 10 inches here
So right now I'm just making sure the rim is relatively smooth before I add that coil that way
I'll minimize the amount of trimming I have to do on the rim
Almost done and not a minute too soon because it's getting hot out here
Now I just have to kind of level off the rim take some time. Make sure that's nice and even and
Then once that's done
I need to go in with that spoon like I was talking about and push out any
Dents in the outside wall of the pot so that the walls of the cylinder are as smooth and as vertical as possible
Finally a little wet buckskin on the rim just to smooth it off and that's it
I'm ready to let this sit and dry a little bit until tomorrow when I will put the loop handles on it
Chaco Canyon is an enigma in the American Southwest
Nothing else like it exists anywhere
around 880 people began constructing these huge stone Pueblo buildings and
Construction continued off and on for over 300 years
These massive structures are called great houses by archaeologists
One of the most surprising thing about Chaco and great houses
Other than the sheer size and scale of them is that archaeologists have found very little evidence of people living in them
Very few hearths and very little trash
So we think that these massive structures probably housed a very small number of people
One archaeologist Stephen Lexen compares them to palaces
Massive extravagant homes where a small family of people lived who ruled over a much larger area. I
Can do a whole video just about Chaco Canyon, but this video is about cylinder jars
So I will hold myself back here. If you would like to learn more about Chaco Canyon
I'll put a link in the doobly-doo to a great video made by my friend over at the ancient America's channel
Anyway, one of the other unique things about Chaco Canyon was these cylinder jars that were found there
archaeologists have found only
210 of these cylinder jars anywhere and of that number
173 of them were found in one single room in Pueblo Benito
The largest of the great houses in Chaco Canyon in room number 28
in
1896 George Pepper and Richard Wetherill dug room number 28 in Pueblo Benito and found this massive cache of ceramic
cylinders in a burned room
That was unusual enough that it made other archaeologists think more about it over the years and in 2013
Patricia Crown an archaeologist with the University of New Mexico
Got permission to re-examine room 28 to find out just what was going on there
She learned through residue analysis that people had been drinking chocolate from these jars
Now the nearest source of chocolate was central Mexico
1,200 miles away from Chaco Canyon
She also found that the room that had held these pots was probably ritually burned
Thereby ending the ritual use of these vessels sometime around 1100 AD
Interestingly the end of the cylinder jars was not the end of chocolate consumption
the Chacoans continued to consume chocolate in mugs after that time and
Coincidentally my next project in the ancient pottery challenge will be one of those mugs
So make sure you're subscribed so you don't miss that video when it comes out
Now Patricia Crown the archaeologist who re-examined room 28 wrote a whole book about it
Which I will provide a link to down in the doobly-doo in case you're interested in learning more about room 28 and the cylinder jars
But be forewarned it is not a cheap book
So now we know that the Chacoans had some connection to Mexico through the chocolate trade
What else might they have learned from Mexico?
Well, it turns out that the ancient Mayans also drank their chocolate from cylinder jars at around the same time in history
We don't know what that means though. Was it just a strange coincidence?
Or was there some connection between these two very different civilizations?
One in the jungle and the other in the desert separated by over 3,000 miles of distance
Second day and my main goal is just to get these handles put on it today
Just clean it up a little bit and then let it dry. The handles on Chacoan cylinders are kind of interesting
They're not for picking up the cylinder when you're drinking it. They're not for adding a carrying strap or anything
They were probably used to tie on lids
So in the same room where all those cylinder jars were found were found a number of stone discs
Just about the right size to sit on top of one of these cylinders
And so it seems as though probably these loops had some string passed through them
Holding on one of those stone discs as a lid
Whether or not this had something to do with the way they were preparing the chocolate
Keeping bugs out of your chocolate. I don't know and some of them are pointing upwards
Like these here and some of them are pointing sideways
Which I suppose it wouldn't matter much which direction the hole was facing if it was just to pass a piece of string through
And the only other thing I have to do today is to clean up the bottom where the cylinder meets that wooden work board
I'm just gonna trim off a little bit around the edge. So it doesn't have such a harsh edge
So it's a little bit rounded and that's it. Let it dry and then tomorrow. I'll be slipping and polishing
The pot is dry enough to slip now
But before I do that, I need to clean up around those areas where I attached the handles yesterday
Just making them as smooth as possible before I apply the slip
It turns out that a lot of the things they had at Chaco Canyon things they used in everyday life weren't from Chaco Canyon
So they did the study on the corn. They found out that most of the corn had been grown in other areas and imported
Was the same with the pottery a lot of the pottery wasn't actually made in Chaco Canyon
They don't believe it was made along the foothills of the Chuska Mountains some miles away and then carried in
Of course, if you look at the terrain around Chaco Canyon, you'll see that it's pretty barren
there's not a lot of trees to use for fuel not only for cooking but for firing pottery that takes a lot of wood and
So in the Chaco tradition, none of the materials in this pot are from Chaco Canyon
Both of the clays I'm using here the gray body clay
I built from and the white slip I applied to it are from near the Mogollon Rim near Cholo, Arizona
Of course, you can't collect clay in Chaco Canyon because it's a national park and the land around it is all Navajo Nation
So I couldn't collect clay from around there if I wanted to anyway
So maybe not the most authentic replica ever but as close as I can get it
So after I built the jar I headed out to California to attend VidCon and while I was there went to Disneyland
I picked up this nifty notebook and in it
I've been trying to work out this design because sometimes these designs are pretty complicated
It takes a while to kind of figure out how to do it
Eventually after a few attempts, I kind of got inside the design and I figured out it's this one crooked line repeated over and over again
For example, here's one of those crooked lines
Here it is repeated five times and here it is repeated ten times
You start to see the design show up after you start repeating it enough times
So all I have to do is repeat this design an even number of times all the way around the pot
So in order to do that, I've measured the pot and I figured out that on the original there are 12 segments vertically up and down
So I've taken this little piece of cardboard and I've marked out 12 even segments and I'll use that to make sure I'm even that
Way, I've also measured the pot around so that I can make sure that each element is the right width that it fills it up
Correctly now here. I'm mixing my red paint. I'm using red iron oxide
It's just hematite that I've ground up and some yellow clay
I in the past I've used red clay to make my red mineral paint
But Paul Thornburg just swears by this yellow from New Mexico. So I'm trying that
I'm not really sure if it's better than the red and a little bit of mesquite sap as a organic binder
And I just have to mix it all up and I'll be ready to go
Now as I mentioned earlier
I built this pot in the middle of June and that time in Arizona the days are getting hotter and hotter
And so when I first started I was building it at like 5 6 in the morning out on my back porch studio
But by the time I got back from California, it was just too hot to work out there even early in the morning
It was already like 85 degrees and it was heating up quickly
And so I moved my workbench into my office and I'm working in my office here
Which is great because I have air conditioning
But the bad side of that is I can't do a lot of different camera angles because it's a pretty tight space
So what you see is what you get as far as camera angles on this
When you're working with natural paint on a stone palette, it dries out really fast
So you need to be really aware of the texture and consistency of your paint and make sure you add water every once in a while
So it stays a nice fluid consistency able to flow off the brush. Well
So if you're paying attention to the design layout
You'll see that I'm just making that same
Crooked line over and over again and using that piece of cardboard to make sure that the vertical spacing is the same
It's really pretty easy. Once you get it figured out. It's just repeating that line over and over
One of the nice things about working with mineral paint is you can just erase any mistakes you made with a sharp knife
So here you see I have a little paring knife
I'm just able to very gently because I don't want to scratch through the slip very gently
Just scratch off the mistake I made with the paint
And then once I get all the design laid out all I have to do is the hatching now the hatching takes a lot of
Time, but it doesn't take a lot of brainpower
You can pretty much just turn on some music and just go at it as long as you have enough paint
The hatching gets applied to every other segment. So some of these little errors like this one here
I just left in place thinking if that area was hatched, you wouldn't even notice it
But because that's going to be a white segment. You are gonna notice it. So I'm cleaning it up
And so as I said hatching is kind of mindless work, but it really makes the design come to life
I mean the design might have looked interesting when I had it all laid out, but the hatching really makes it pop and
Now all I need is for the weather to cooperate so I can get this fired
Today, I'm firing not just the cylinder jar
I just made but a second cylinder jar that was made during the ancient potter's club back in January
The ancient potter's club is my weekly zoom pottery class and every month we make a different project
So this was our project in January. It's been sitting around my studio. Seems like a great opportunity to fire both of them
Also, I'm firing that cover shirt that straight across from me
That's just kind of a piece of pottery that I use to protect the pots being fired from the fuel
So I'm not only using it to protect the pots. I'm also firing it. It's unfired at this point
So I'm just building a bed of coals and heating up the pots to remove any remaining moisture
Now I'm putting in what I call kiln furniture
These are just large stones that hold the pots up above those coals and in this case
I'm using relatively large kiln furniture because I want a lot of air circulation under these pots
I am also refiring that membranous bowl you see sitting next to the pit
That's another project from the ancient potter's club from way last year
That's already been fired a couple times as I was trying to figure out this reduction firing
I fired that a couple times failures was unable to get it to reduce iron
So I'm refiring that in here as well to try to get that iron to reduce to a good black
Those cover shirts that you see me covering the pottery with are there to protect the pottery from both the fuel and the dirt
That'll smother it later on
Now you'll see that the fuel I'm using the wood is a lot thicker than what I usually use if I'm doing like
Salado polychrome and that's because I want a nice hot fire
I want a long duration fire and I want a really good bed of coals when it's done the actual firing you're watching here only
Took a little over 20 minutes
So not a lot longer than my average firing but a bit hotter than my average and definitely of a longer duration
than my average
That cover shirt
780 that's good
This one over here a little more exposed
About 820
Fact I can hit I can hit one of the cylinder jars this way. There's a big old gaping hole
The cylinder jar is 820 and it's looking as clean as a whistle
one of the problems I've had with these smothered pit firings in the past is that
At this stage if I look in and see the pots, they look clean. I've burned all the carbon off of them
After I've smothered them and pulled them out. They're always a little gray and I think just a theory
I think they're picking up carbon from the earth that I smother it with I think as that earth
Hits those hot coals. It has you know, a certain amount of organic matter in it
It's smoking and that smoke is graying the pots. So in this firing, I'm actually going to protect the dirt
From those coals by putting more cover shirts over the top of the coal. So I've got like a sandwich there, right?
I've got the pottery then I've got a cover shirt
Then I've got coals then I've got cover shirts
Then I've got dirt all these layers protecting one thing from the other
But the hope is that when I open this those pots are clean. Those whites are brilliant white with no gray
carbon marks on them
The idea here is to just keep the oxygen away from those pots while they cool
So once you get it smothered, then you have to wait about four or five hours until they're cool enough to pull them out
My biggest concern at this point is that the pots are still hot enough to oxidize
And so as I open it, I'm being especially careful to make sure that it's cooled off enough
Now that dirt and the pots can still be pretty hot, but it needs to be below about 300 degrees Celsius
If the pots were too hot when I open it up then the paints those red paints
Which hopefully have turned black in this reduction firing would start to oxidize and turn red again, which we don't want
So hopefully they're gonna be nice and black
members polychrome
well
we got black and white but the
Brown didn't turn brown. It turned gray
That was already cracked when it went in it cracked a little more. All right
Look at that clean as a whistle clean as a whistle
Look at that. Isn't that beautiful?
Good blacks good whites. That's the best reduction firing ever
Fired nice and hard
They're both fired nice and hard and the blacks came out good. The whites came out good
It oxidized better oxidized the carbon off
Frickin the flies are crazy out here today. It oxidized the carbon off better at one end and I'll have to look at that
some of the video and figure out which end that was whether it was like upwind or downwind or something, but
One end has a little more carbon on it than the other but for the most part real clean real good
Super happy so you can see that I'm really getting this reduced iron painting down
If you want to see that last video I made where I fired that big Tula Rosa pot
That was really my first really good successful reduced iron painting video. I'll put that right over here. Thanks for watching today
I'll catch you next time
