I bought a WRECKED RSX and I'm.....

Ex Used Car
15 followers
What's up guys.
If you've been on my Instagram, you've seen me post a photo of this over here.
Which is a 2002 Acura RSX Type S. And if you notice, the front end is missing and there's
a bunch of other things that's messed up about it.
It's pretty much wrecked.
And no, I'm not going to build this thing.
Also notice that my Honda Civic is right beside it.
Because it's going to be the recipient of the K20A2 from the RSX.
There's a reason why I bought the whole car.
And that is because I'm planning to do a California legal swap.
I'm going to go through bar and try to get the swap legalized in this 2000 Honda Civic.
Now some of you guys may not care because you live in other states where it doesn't
matter.
You can probably throw a V8 engine in this thing with no catalytic converters and it'd
be fine.
But us who are not so fortunate in the state of California, we have emissions laws and
one way to get around it is to get it bar certified.
So what are the details of going through bar and getting the engine certified for this
Civic?
Well, from all the stuff I've been reading online, I may have to swap the RSX's fuel
tank over.
Some guys seem to have gotten away with it by just adapting the returnless fuel system
into the Civic.
There's also the charcoal canister.
And there's also the intake because the stock intake box from the RSX isn't going to fit
in the Civic's engine bay from what it looks like.
So I'm going to have to buy a carb legal intake which should fit in the Civic's engine bay.
I've even read stuff that someone got the K20A which is from the Type R version of this
to pass.
So I'm going to have to call up my local bar station just to find out what affects me because
it seems like every bar station has their own unique requirements or maybe it just depends
on who's inspecting.
But anyways, before I start tearing the RSX apart, let me just give you guys a quick run
through on the condition right now.
You can see the rear has been hit really bad, especially on the driver's side right here.
It's pretty much gone.
And as far as the alignment goes, it's not too bad over here but guess what?
Check this out right here.
Yeah, straight up drifting right now.
Look at that.
Now let's take a look at the inside and you can see the door handle is broken but it still
operates.
And the dash still looks pretty good.
I don't really care much for this interior because I'm probably not even going to use
any of this.
But as far as the dash goes, I might have to swap this into the Civic with the cluster
maybe.
I'm going to try to not do it but I'll keep you guys updated in future videos so hit the
subscribe button.
Here you can see the front end is pretty much missing.
But the good part about it is that the radiator and AC condenser is not leaking.
And here's the heart of the project, the K20A2.
And this thing doesn't have a limited slip differential but it does have 200 horsepower
And throwing 200 horsepower into this thing would make it so much more fun.
The D-Series was pretty good in this car too.
I did a compression test on it and it showed up very healthy.
But it's just not powerful enough.
So that's pretty much it for our updates on Project Civic over here.
I'm working on the wiring right now as I'm waiting for parts to come in.
I'm still placing a lot of orders for parts because you can't just throw a K20 into your
Civic.
You still need engine mounts, clutch, and a few other items or multiple items.
And I will keep you guys updated.
So hit that subscribe button and let me know what you guys think in the comments section
below.
I'll see you guys in the next one.
