BMW E46: Subframe Restoration. Part 2 - Disassembly

Restore all old things
33 followers
Some piece still sits inside.
How they thought I should remove it?
Looks like axle was removed before, judged by the rust and how easy it came out.
I don't like view of this thread.
These last two bolts have little bit leaked thread on them.
This is an example of good one.
I cleaned this sensor little bit out of camera and it's completely fucked up.
Look at that mounting points.
They was repaired even before me.
Some guy put it on the glue and right now there's no sense to glue it again because whole stuff is tearing apart.
We need to buy a new sensor or repair it in some crucial way.
I will cut the whole part of the sensor and glue it again on the epoxy and put a new screws on it.
This is how original mount point look like without of repair and it's the same way.
There's nothing alive here.
The whole metal is disperse.
And the most ironic stuff that whole thing should be holding on these little bolts.
Even screws would be more reliable in this case.
