Making Walls From Wood - 100% Natural | Part 3 - Woodland Wildlife Pond Build

Camping Kids
63 followers
21 Video Views·Sep 11, 2024
Comments are disabled for this video.
Welcome to part three of our woodland pond building series.
So we've had phase one which was the clearing, felling the zone, opening up all the light.
Finn gave me a hand with that one.
The last one, part two, was me bucking up and miming all the trees that we felled.
Since the part two video I've been back in the woods on a couple of occasions.
So I finished up bucking up and slicing up the logs up into decent size rounds
that we're going to use to build the walls.
Had a little bit of a demo which you can see just behind me.
A couple of areas there but we've come back today and I brought Finn with me
to really help get the rest of the perimeter walls done.
What I've also done is doing a little bit of tree planting and open up a channel.
You can see behind me there's six trees being taken out, again all beech.
That's really designed to let more light flood through a southerly direction into the pond area.
If you've got any questions at all about what we're doing,
comment below and we'll always get back to you.
We're always really keen to engage.
And obviously if you haven't already and you're really interested in what we do on the channel,
bushcraft, wild camping, but more recently and the focus of this series
which is woodland management and wildlife pond installation,
then please think about hitting that subscribe button.
We really appreciate the support you give us.
Right then Finn, let's make a start.
We want to get all this leaf litter out.
So what we'll do, we'll rake, we'll rake it backwards and we're just going to get down to...
Right rakes, over here.
What you don't want to do Finn, don't put the rake,
don't store it like that because you'll step on it and it'll whack you in the face, okay?
Or I'll step on it and it'll more likely whack me in the face.
So you store them upright like that, lean against the tree, okay?
Right, so these are huge pieces of wood, okay, but they roll really easily.
We want them perpendicular so we want the...
No, no, no, no, no, no, Finn.
Spin it and roll it, okay?
The other advantage about digging a slight pit
is that wood that's almost like below the ground
will behave differently to the wood that's in the air, that's above that, okay?
So again it just mixes up, produces different habitats.
So if that's the first one, let's get this next one in.
Can you tilt it over?
That's it, and then roll it this way.
Spin it.
What about this one here?
We can maybe use this one.
That one, that one could maybe go there.
Yeah, but if we put that there now, that'll cross one up here.
That bit there's just...
Right, can you see how that's wobbly?
Because it's on a dough of dirt, isn't it?
And it wouldn't be a bad thing to put some dirt, yeah?
Slightly out with this angle here, can you see it's going...
We're missing that tree slightly so we need to change these slightly.
Can you just steady that a second?
There we go, that's better.
So that's lifting it up, that's what you really want to do.
So that's the lever.
This pants hook has a hook that digs into the timber.
So put it on there and tap it in.
If you see how really easily you just roll it.
See it?
Yeah, right, it might be worth...
Now because you see that's narrower there than it is there
and we want to turn it slightly that way.
So if we spin that round,
we're actually using the shape of the wood to turn it a little bit towards that
where we want it to go.
Okay, so now what we can...
No, no, no, no, no, no, no, that's too big for you.
Yeah, just roll it like that and then that slots nice into there.
Oh yeah, I know which one we can use in there.
Yeah, or do we want to create that?
Should we use that as a little animal entrance point?
So if you drop another bigger one in there.
Okay, right, if you set that up.
There, so we've got...
So this thing, we've got something that's going to stop it
that's going to wedge it in the ground.
It's going to be put like that
and then obviously we've set these little sort of strips of wood
which should stop the roll every time we bring it up.
Might work, might not, we'll have a go.
This is going to roll up there, see?
So that means that obviously I wouldn't leave it there
but in theory those little pieces of wood
do stop it rolling straight back down
but when we roll it to this position
we want it to catch into there.
Now if we could get something to just support it there.
There you go, so that wedge will stop that going.
Yeah, there you go, you're set up.
So I'll leave you there for the afternoon?
Yeah.
But actually it's not even, well I was saying afternoon.
It's only half nine in the morning.
Right then, so let's work the other end out.
So what that'll do is just...
Now that sharp bit, we don't really want that sticking out
so if we can pop like that, that's spot on.
Can I test that with the ramp?
Well I'll tell you what, I'll get it on the ramp.
So I'm not lifting it, you see, I'm tilting it.
So I'm not picking up the weight of the log.
Right, can you roll that there?
So you're pushing down, so you've almost got to...
It's more of a roll up like that, okay?
Yeah, yeah.
How heavy are these things?
Heavily.
Roll that up and then that can just spin into position.
Get rid of that.
Now you can see that sloping that way slightly
so if we spin that around...
At the moment they do slide
because they've got the fresh bark
but gradually with time that'll fix in and lock.
So the next one we want is one in there,
maybe a bit of this ash, for example.
Yeah, so that's quite nicely wedged there.
Need another one of these big boys in there, I think.
Humans right since the dawn of time have found ingenious ways
like how they built the pyramids with no modern machinery, didn't they?
I think it's too big.
You can see that it's just...
We really do want it to wedge
but now we've got it up there,
let's pop that one there safely out of the way.
You see that little old little branch might help lock in.
Try this one.
How hard do you want it?
Like that hard?
No, not much harder than that.
It's just a deterrent to stop...
Some dogs could jump over that.
Yeah, I know.
But they've got to be that bothered to jump over it
and that's the thing, most of the dogs,
they've got this whole woodland to play in
so why are they going to mess about trying to scale a wall
when there's loads of other stuff to entertain them?
See that can be a little passageway through there.
So let's roll, let's finish this section.
That could be one for a bird.
Yeah, yeah, I think the birds probably just fly over, wouldn't they?
Yeah, but they could nest in there possibly.
I think the heavy bits of this one are done now,
we can put smaller stuff on and just fill in the gaps.
So let's get the big ones done on that one over there
and then that leaves us an idea of how much stuff we've still got left, okay?
How's that working though?
What can I do?
It's called the lever effect.
The force that you're putting through your hand
is magnified by the length of that lever,
by the length of the arm of that tool.
So if you put the same pressure down near the actual log,
you'd hardly move it at all, yeah?
Now go and try at the far end.
So much easier, isn't it?
Yeah, so that's where you use levers to help move heavier things.
But that's the thing you're learning, aren't you?
Good stuff.
Right, this is well on the way, this wall now, Finn.
So we maybe pause that one and then start attacking this area, I think now.
Okay, so we've had lunch.
It wasn't very interesting, it was just a packed lunch,
so we didn't bother filming it.
So we're at this position now,
so we've pretty much done the perimeter around there,
but the next plan is to what, Finn?
Yeah, so we want all the detritus or the leaf matter, everything grabbed up.
We've got a large jumbo bag,
which we're going to sort of gather it all in.
Not to take it away with us, we're just going to dump it,
create some more wildlife habitat over there.
So we're just trying to get...
I mean, we're not going to get every leaf, obviously.
We're just looking to get most of it out.
Let's try.
Go on then, be like a shy horse.
Tired, Finn?
Yeah, so a neighbour is on his saw, so apologies for the noise,
but yeah, that is pretty much raked clear of detritus now and leaf litter.
It doesn't have to be any better than that.
So we have obviously the partial wall where we need the access
and now we've got almost a complete perimeter wall
with a little gargoyle sat over there.
So we're going to have a breeder
and we'll get some of those logs built up around and use them up, I think.
What are you going to do?
Just, yeah, you can mess about for a bit.
You've worked hard on all that raking,
so you just take it easy.
Right then, Finn, that's it for shifted timber.
So we're going to put that signage on now, okay?
Stop.
Keep going, keep going, keep going, keep going, keep going, keep going.
That's it, perfect.
Put it in about there.
That's it, keep going.
That's it.
Okay, happy with that?
Right then, that's it.
It's been pretty gruelling, I have to say.
We've shifted huge amounts of timber
and have almost a complete perimeter around the pond area.
The only bit that's missing is our access,
which we'll block off, obviously, when all the work's done.
We've raked all the leaf litter, all the detritus off.
Part four, we'll be starting to dig out the pond.
So if you enjoyed this and interested to see the progress that we're making,
be sure to hit that subscribe button, bell notification
if you want to be notified when we upload.
It won't exclusively be pond uploads.
We've got obviously the wild camping, the bushcraft and the mudlarking,
if that's the sort of stuff that you're interested.
So I'm going to say cheerio.
Finn, over to you.
Bye.
