
Paper Crafting with Lou Collins
723 followers
38 Video Views·Sep 10, 2024
hi everybody I'm L Collins and as many
of you know I have two dogs and I
absolutely love to walk them in my local
area so I have got myself from Ordinance
survey a map of my local area so that I
can create a wonderful personalized gift
now I'm going to be keeping this for
myself and I'm going to show you step by
step how I've created this fantastic
walking bag complete with your area
printed on it as well and a pocket for
something extra special which I'll talk
more about towards the end so here's the
template that's available for you to
also use and I have printed this off and
I've made sure that I've printed off two
of the first sheet that's the front and
back panels because we need to cut two
of those so at the moment here I've got
all of my pieces already cut out and the
way I did this is by just roughly
cutting out from the template and then
using a repositionable or removable
adhesive this is a spray adhesive and
I've adhered each of my panels onto my
map before cutting them out and been
really careful to ensure that for the
front flap of the bag that the main part
of the map that I want to feature is
there in the center towards the curved
Edge now for each of the sections I have
also cut a piece of really strong orange
card stock I went with orange because
the uh Ordinance survey maps have an
orange background and I just thought it
worked really nicely as an accent color
and I'll also show you an additional
thing I'm going to be doing with this
bag later which ties in with the orange
to so I've cut an additional panel for
each one of my four pieces using the
orange card stop as well and that's just
going to strengthen the bag now you'll
notice on the second page of the
template that you've got Edge panel cut
one strip 5 cm x 15 cm this is the piece
that's going to go around the bottom and
up the sides of your bag and this is
what I've done here this bit isn't
really likely going to be seen so it
doesn't matter so much which part of a
map you use I have also backed this onto
a strong card stock too so the first
thing is to secure the front paper from
the map onto the card stock for each of
my panels and I'm doing this using a wet
crafting glue so this is my sizzix
Express glue but any wet glue you've got
that you know bonds paper to paper or
card stock to card stock really well
will work and I'm using quite a lot of
glue here this is going to be a bag that
I'm going to take on my dog walks I
don't want want it to be falling apart
at all now I am going to also be
stitching this too for two reasons a
that is also going to reinforce these
edges for me and keep them secure but
it's also going to make the bag look a
little more like fabric too so now my
matte paper is stuck down to my orange
card stock we can start constructing the
bag so this is going to be the front
flap of my bag the piece that folds over
and keeps everything inside safe secure
and dry um before I do any stitching on
this I'm actually going to take my Mod
Podge in a mat and I'm going to go over
the map paper side of all of these this
is going to be the outside of my bag and
just in case of a little bit of water a
little bit of rain or short shower I
don't want the paper getting ruined this
is going to protect it now I would
ideally do two or three coats of this
I've used a matte because I still want
to keep that kind of fabric look to it
rather than a glossy finish so I'm going
to go ahead and cover these in the Mod
Podge because it's matte you probably
won't see any difference when I come so
now there all sealed I'm going to turn
over the top flap of my bag and work on
the reverse and I'm going to make a
couple of marks from the short straight
edge I'm going to Mark myself 8
cm which will take me to here and also
from The Edge just 5 cm so I've got
three and five with which equals eight
and again just down here so just placing
the eight there on the edge of the page
Mark that zero and Mark that again at
three there now if I run my ruler down
and create these vertical
lines
one and another one just make sure that
is nice and
straight I've now got myself a gap here
of 12 CM a gap here of 3 cm and a gap
here of 5 cm M this is going to allow
this part to be attached to the back of
your bag this part to come over and then
this part will come down the front so
now you want to take the piece that is
your back panel and if it's easy you can
also write on it and write the word back
just so you know and you're going to
want to put the two together so that the
Orange is on one side the maps on
another and the curves facing away from
each other so you've just got the top of
your back panel coming to 5 cm in from
that straight edge like so now at the
moment I'm going to glue things together
and then I'm going to do some stitching
in just a little while so I'm going to
add some glue to this 5 cm piece
here and place these two together now
I'm going to take a scoreboard and make
these lines score lines so they're
easily
fold so we want to go right up against
the top of the back panel where we've
just glued it and then we want to also
make another additional score line where
the second pencil Mark is we should be
able to now fold this down like so and
you can see how that will fold over but
when you turn your bag over this part of
the map is also facing the correct way
round now this part of framlingham town
that's my town that's where I live live
so that's why I wanted this in the
center of this flap here at the front
and this is going to be the focal point
but I also needed to ensure that on this
panel that it was down the bottom near
these curved edges as I said at the
beginning before I go to my sewing
machine I also want to place inside my
bag a pocket and this is going to hold a
special gift that I'm going to show you
towards the end so just here I've got
the pocket the side pocket and I'm just
going to glue this around the edges and
this one is going to have the map facing
on the inside of the bag so I'm just
going to run a thin line of glue around
here and not on the straight edge at the
top and just adhere that down like so
now in the sewing machine I'm going to
be using a black thread for both the top
and bottom thread and I'm going to be
using a straight Stitch
so I'm going to go around the edge of
this bag 1 cm in from the edge and I can
gauge that on my sewing machine on the
base I can put a piece of tape to make
sure that I keep this to the same
distance from the needle all the way
around um some machines already have a
gauge on them so I'm going to stitch all
the way around the edge of this one I'm
then also going to stitch around the
edge of this one as well and the same
with this one too before I go to my
sewing machine I want to do everything
at the same time so I'm now going to
prepare my strap and Stitch that into
the side piece so this side panel here
this is going to have the strap coming
from either end and it's going to be
stitched on going into the bag so onto
the inside I'm then also going to place
a small piece of orange card stock over
the end and Stitch around that to also
secure my strap in so the strap or the
handle whichever you want to call it I'm
actually going to be making this from
some Hessian ribbon that I had laying
around because I really like it it's a
really good width as well it's a little
bit less wide than the bag's going to be
but not by much so I'm going to be using
this now with this I want to double it
up too because as you can see you can
just about see through it so I think it
would be better if it's double the
thickness and the measurement I've taken
is from my shoulder down to my hip where
I want my bag to sit I've doubled it
which gives me the overall length of the
strap and then I've also doubled it
again to give me how much ribbon I'm
going to need so for myself that was 70
CM from my shoulder to my hip and then
I've add I've doubled that give me an
overall length of 140 cm so when I get
to the sewing machine I'll be doubling
up my ribbon and I'll be stitching
around the Edge just to secure this
before I then Stitch it each end onto
the end of the um side panel there and
as I say I will also be stitching a
piece of card stock over the top to just
make that nice and neat too so now I've
stitched around all the edges with a
straight Stitch anywhere I felt like I
needed it to look like fabric I've done
the uh bottom and the sides of the bag
as well and I've done the strap and as I
suggested I have also put an extra panel
of card stock over the ends of the
ribbon so that they are all sealed in
and enclosed so now what we need to do
is attach the front to the back using
this side panel okay I did make sure
when I put my strap on that it was all
straight so that when I hang it over my
shoulder I don't have any twists in it
the first thing we need to do is find
the halfway point in our um side panel
so just folding it in half here making a
little pencil line and we can do this on
the orange as well that will show up
much easier on the orange so that's my
halfway point and that's where it's
going to need to go halfway across my
bag which I'm now also going to measure
so this is 16
cm so there's the 8 cm Mark so around
there is halfway okay so what I'm going
to be doing is cutting around this curve
on here so I need to know where the
curve starts and where the curve
finishes so by placing the halfway point
of the strap against the halfway point
of the bottom of the bag I'm going to
just Mark where the curve starts just
there and you can kind of roll the two
together try not to let it slip so let's
do that again roll the two
together there we go
and Mark again where the straight part
starts so this part is going to be my
curved area and I'm going to do that on
both sides so where the curved area is
going to be I'm going to cut some lines
into the edge I'm going to use the
stitching as a guide and I'm going to
cut almost teeth as such into here and
these are going to help the edging just
bend around the corner that it needs to
so I've got four areas to do this
to and on the rest of the strap you want
to just fold the edges inwards so you're
folding against that stitching that
you've done which is why I suggested the
stitching should be around about one cm
in from the edge so I'm going to use a
wet glue again for this next part but if
you prefer you can definitely be using
something like a hot glue or even a
super glue if you have it bit so where
I've just bent these um score lines I
actually folded them in but I want them
folded outwards so it doesn't matter
because you can make the cardboard more
flexible by folding them in out in out
until you've got that flexibility that
you need to be able to work with them
and again I'm going to use my Center
Point as a guide and I'm going to start
by gluing to the bottom of the bag the
side piece The Edge piece just with the
middles lining up which is there and I'm
just going to do this straight bit
first now at each stage of gluing this
on because I'm using a wet glue that
takes a little while to dry I'm going to
wait for each part to dry before I go on
to the next one I don't want to be
moving things around and disrupting
things and then another area breaks
apart because I'm moving it too much so
I'm going to take my time with this just
do it section by
section and once this bits dry I can
then bend the this corner around and I
can glue the rest of the strap all the
way up to the top of the bag there and
the same on this side so here is my
finished Ordinance survey personalized
bag for going on dog walks for trekking
whatever you want to it's got light
water resistancy because we added that
coating on I've put a magnet just inside
here to keep the top down and I've added
a book ring so that I can can hang my
keys on there either inside or outside
the bag probably best on the inside now
we've also got the pocket on the inside
and the reason for that is because
Ordinance survey also do personalized
Maps these are so much fun you can have
your own photo on there and on the
inside when you open this up the center
of the map there we go is my hometown
and my house is right in the middle so
this is all the places that I'm going to
go walking with my dog so although I've
got my map on my bag I've got my own
little custom map that I can pop inside
and I've purposely made the pocket on
the inside just the right size for
fitting that in I've got plenty of room
in there for my phone for my dog bags as
well anything else that I might need on
a walk that all Clips shut with the
magnet and I've got this lovely long
strap to pop over my shoulder I am
absolutely thrilled with this I'm going
to be taking this on my dog walks for a
very long time I'm excited to get using
it and it's going to be the perfect gift
for someone if you're just not sure what
to get them you can go online to
Ordinance survey you can order maps of
your hometown of your friends and your
fam's areas and you can do a beautiful
personalized gift just like this I hope
you've enjoyed this a little bit
different from me make sure you check
out all the details for Ordinance survey
down in the description below and let me
know in the comments what you think of
this bag and would you make something
similar take care everybody and I'll see
you again very soon
