How Is It Possible? A 5000cc V-Twin Attached on Motorcycle

The Engine Story
7 followers
2 Video Views·Sep 10, 2024
Currently, the largest V-twin engine found on a motorcycle can be seen in the Harley-Davidson
lineup with the Milwaukee 8 engine, which has a displacement of 117 cubic inches,
or approximately 1,900 cubic centimeters. Meanwhile, the largest V-twin ever made is
the Kawasaki Vulcan 2000 with an engine displacement of 2,053 cubic centimeters.
But what if there was a V-twin engine with twice the displacement of the Milwaukee 8
or the Kawasaki Vulcan 2000? This motorcycle could be considered one of the largest V-twin
engine motorcycles ever made with an engine displacement nearly reaching 5,000 cubic
centimeters. Named the Flying Milliard, this astonishing V-twin engine motorcycle
is the creation of renowned British motorcycle builder Alan Milliard. Alan Milliard has been
involved in the custom motorcycle and engine building world for over 25 years and has
created several unique motorcycles, such as the Kawasaki 5-cylinder 2-stroke, the Milliard
Viper V10 engine taken from a Dodge Viper car, the Kawasaki Z2300 V12, and others.
His creations have participated in various exhibitions and contests, winning several
awards. Some of his motorcycles are now displayed at the Barber Vintage Motorsports Museum,
one of the largest motorcycle museums in the world, located in Birmingham, Alabama.
The birth of Alan Milliard's giant V-twin motorcycle began with an award he received
at the classic automotive exhibition, Salon Privé d'Elegance. At that time, Alan brought
the Honda SS 100 V-twin, a motorcycle based on the Honda SS 50cc, modified with a 100cc V-twin
engine. Unexpectedly, this small displacement V-twin engine motorcycle won the Best in Show
award at the prestigious automotive exhibition held in England. When asked by the organizers
about the motorcycle he would bring to the exhibition next year, Alan Milliard replied,
if this year I won with the smallest V-twin engine in the world, then next year I will build
a motorcycle with the largest V-twin engine in the world. Armed with his experience in the custom
and engine building world, Alan began to realize this project. Initially, Alan planned to make all
the engine components from scratch, but after finding a pair of large cylinders with a 146
millimeter bore on eBay, he used these cylinders for the large V-twin engine he was building.
These cylinders turned out to be from a Pratt & Whitney R1340 Wasp engine,
a nine-cylinder radial aircraft engine developed in the 1920s through World War II. This engine
was one of the most successful aircraft engines of its time, with a production total of 34,966
units used in various aircraft types including Yunkers, Curtis, Boeing, and others. Alan Milliard
bought these cylinders from a vintage motorcycle club where the owner had obtained them from a
World War II era aircraft and purchased them in 1965. The plan was to use these cylinders to build
a V-twin engine for a Morgan three-wheeler, but since the original owner had passed away,
the cylinders were inherited by his closest friend, a member of the vintage motorcycle club.
After obtaining this pair of aircraft cylinders, the next challenge was determining the cylinder
angle. It was not easy to determine the V-twin angle, considering the aircraft engine cylinders
were wider and longer than motorcycle cylinders, requiring the correct angle. If too narrow,
the engine height would increase and space for the carburetor would be very tight. If too wide,
the engine length would increase. After taking measurements and various considerations,
Alan Milliard decided to use a 70 degree V-twin angle. The next step was to draw the engine
crankcase design, then make a wooden mold for the crankcase and ask New Pro Foundries LT
to cast the crankcase. The piston rods were made by Alan Milliard himself from 50 millimeter thick
aluminum, while the crankshaft used two inch thick steel that was machined and balanced to size.
Each of these aircraft cylinders was secured with 28 bolts on the crankcase,
and the cylinder bore was 146 millimeters with a stroke length of 146 millimeters,
resulting in an engine displacement of 4,886 cubic centimeters or 2,443 cubic centimeters per
cylinder. This nearly 5,000 cc engine was air cooled with a dry sump oil lubrication system.
However, there were some modifications to the parts such as sodium filled valves to help with
engine cooling. Another component made by Alan Milliard was a 50 millimeter diameter carburetor
equipped with an electric pump, allowing the fuel mixture to be adjusted via a small lever
on the right side of the tank. The transmission used a four speed gearbox with one reverse gear
taken from a 1930s Morris Series 10 car, combined with a modified dry clutch from a Honda CB 1100F.
Due to its large dimensions, this V-twin engine could not be fitted into any motorcycle frame.
Therefore, Alan Milliard made a custom steel frame and front suspension to support the engine
with 21 inch wheels from Harley, brakes from a 1970s Kawasaki, and several other vintage motorcycle
parts, all packaged in a 1920s board tracker style. The construction of this motorcycle took
11 months and it first appeared at the Salon Privé Concours d'Elegance Classic Automotive
Exhibition in 2013, winning two awards in the best-in-class and most over-the-top vehicle
categories. Alan Milliard named this motorcycle the Flying Milliard, inspired by the legendary
American motorcycle brand Flying Merkle, which was known for its V-twin engine motorcycles.
The original Pratt & Whitney nine-cylinder radial engine used in aircraft was quite powerful,
capable of producing 600 horsepower or 100 horsepower per two cylinders. However, Alan
Milliard did not build this motorcycle for performance, but to look unique and be ridden
calmly. According to Alan, this motorcycle is estimated to have around 80 horsepower.
Despite having a total weight of 250 kilograms, the 4,886 cubic centimeter V-twin engine performed
impressively, as at a speed of 100 kilometers per hour, the engine revs were only around 900
revolutions per minute. Alan Milliard himself tested its speed up to 121 kilometers per hour
on a GPS speedometer, and he said this speed was achieved over a distance of about one mile.
Due to its massive displacement, its fuel consumption was very high at 5.5 kilometers
per liter of fuel. Therefore, this motorcycle was equipped with a 23-liter fuel tank.
Impressively, Alan Milliard also claimed to have ridden this motorcycle for 4,500 miles
while attending various automotive events in England, proving that this motorcycle was not
just a display piece, but fully functional and roadworthy like any other motorcycle.
So, what do you think about the Flying Milliard? Okay, that's all for our discussion in this video.
Don't forget to subscribe to our Technologic channel and comment down below
with your thoughts and questions. Thank you for watching and see you in the next videos.
