#125 Restoring the walls and digging the bedrock of the granite ruin

Project Kamp
131 followers
666 Video Views·Sep 2, 2024
Can we renovate granite walls? (Clay research module):
https://community.projectkamp.com/research/can-we-renovate-granite-walls
Support our project here:
https://projectkamp.com/support
Join our patreon to watch the next video one week ahead (without adds)
https://www.patreon.com/one_army
Or hangout in our online community. also cool
https://discord.com/invite/SSBrzeR
Call for coders for the software of the Community Platform
https://github.com/ONEARMY/community-platform
0:00 Intro
0:26 What we discovered
1:59 Stone floor digging
8:08 Meet Joel
9:04 Digging but faster
12:16 Water trench
14:22 Moving dirt outside
17:53 Getting clay
21:35 More clay
26:20 Clean old mortar
28:49 New mortar
33:06 Architect final design
35:02 Outro
Four years ago we bought this piece of land
and so far we have been recovering the land,
building and discovering a lot of things, like this ruin.
In the last episode you saw us clearing the
vegetation, removing the rubble, finding treasures
and taking measurements to turn it into a house.
And in the meantime our architect came up
with a design so we are ready to start the work.
But first...
let me show you a bit what he found out in this ruin.
The first thing that we discovered is that
the floor of this ruin has this granite that
is rotten, all the rocks are very brittle.
So we were a bit scared like of building on
top or not but the architect recommended us
to just dig as much as we can...
breaks really easy.
So one of the first steps is also to remake the walls.
We will start by taking away the rocks that are loose.
This is a bit like a jenga game.
If you can take out the rock it's because you're not holding anything,
so apparently it's safe.
So first it would be to take out all this
and then with the mix and clay and sand remake
the wall with the stones we already had from before.
Also the ruin is partially dug in the soil
in this side so there's a big amount of soil
holding the wall.
We were a bit scared of removing this area
of soil but the architect said put away this,
rebuild the walls and that's the best way to go.
So that's what we are gonna do.
Remove this and start with the wall renovation.
Now it's time to start to dig the floor of the ruin.
In the meantime we will continue with the
design process to check if we can put windows
here, if the walls will support holes, we'll see.
But for now, floor digging.
You see?
With the pickaxe with the hammer.
That's hard stone.
So right here we've just managed to reach some solid granite.
You can see that because there's white marks
where I tried to get through with the pickaxe
it just flakes off and crumbles like this.
And I will take everything that flakes off and
breaks really easily like this stuff and then
we try to keep any solid granite as a foundation.
Look at this lovely grus.
Perfect for fill the holes in the road.
Play petanque.
-Vamos Tincho -Are you gonna help me?
Yes I will.
Okay.
Come on, come on.
Run Tincho, run.
Slowly the job is getting exhausted.
The more we dig, the tougher the soil becomes.
It's harder.
It´s like a whole new layer coming off.
Is that soft or hard?
Not that hard.
So more people came in to help dig the soil.
This guy is angry.
Don't mess with Tincho.
What is this technique Tincho?
It's the golf technique.
Until Australia like this.
What the hell?
Black mica, quartz.
This is like the formation of the grus.
It's like it's starting to decay.
But it's harder than the first layer.
Okay so what we're going to do now is we're going
to use this impact drill to drill down through this.
Just to get a feel for how much of this is soft
granite and if we can reach a tougher granite below.
Okay.
That's much tougher.
So it seems that one side of the floor is much harder granite than the other side.
So we're going to try dig out the soft side and make it a bit more level.
And then we're going to see what we should do with the harder granite.
Hard.
Soft.
Hard.
The soft rock is much easier to dig through.
However the hard rock is very very difficult.
So today we're going to experiment with different ways that we can potentially move
the hard rock to make the drainage there.
First method, a small chisel and hammer.
Seems to work quite good.
Second method, big metal spike and a big hammer.
Let's put a second one next to it.
Third method, crowbar.
That does not sound like it's going in.
Well it's kind of.
Only small parts.
Okay let's try the pickaxe again.
Still not very effective.
Raining stones.
It's moving.
Okay can you hammer a little bit?
Well.
Hard work for this little piece.
For a little piece of granite.
Hammer, chisels, wedges. None of it was working.
Really it was too slow.
So I'm going to try the hammer drill. The impact drill.
Already stuck.
This is really tough.
All the methods we've been trying so far have been, they work but very very slowly.
And we have a lot of rock to move.
So we're going to have to try and find a different approach for the moment I think.
It will take way too long.
I mean it's fun but it takes too long.
But you're getting fit eh?
If you can call it fit maybe. My joints hurt so.
I think that's fit.
By the way, this is Joel. Meet him.
Good day! My name is Joel and I´m irish
I came to Project Kamp with my girlfriend Solenn.
Solenn is joining the Land Clearance team and I came to join the Workspace team.
I have a background in construction and wood carving.
I learned many of my skills through my late
father who's passing motivated me to explore
and live life the way I've always wanted to.
I have a multitude of hobbies and interests,
the most interesting of which are fire spinning,
music and zoology.
In the future I hope to either join or start
a sustainable community and live life immersed
in nature.
So imagine I'm telling a really funny joke right now and laugh in 3, 2, 1.
That was awful, let's do it again.
Now I'm here to renovate the granite ruin.
Let's get back to work.
Big piece of rock.
Good work, Reuben.
Yeah.
Couple pieces of rock. That's what we need.
Put it with the rest of it.
By this time we started to realize how long this would take
with hand tools and the rock was becoming incredibly tough.
So say hello to my little friend.
From the bottom of this drill point up to here,
it's just about 28 cm or so and up to here is about 30.
So this is a height that we're trying to go for
from the bottom of the floor to the doorstep here.
So this is probably as far as I'm going to go down but
I'm going to bring it down to this height on all sides.
Where is Joel? Where is he?
Not there.
So when using vibrating tools like the kango hammer
we're using, you're supposed to take breaks quite regularly.
Only working for about 20 minutes to half, an hour at a
time, then taking 15 to 20 minute breaks each time you stop.
The reason for that is you can end up with some
nerve damage and it can cause your hands to shake.
You have to take regular breaks and make sure that you're taking care of yourself
first because if you're not taking care of yourself, you can't use the hammer.
So Joel.
How long has it been since you've been digging?
What year is it?
So right now I am just cleaning up in here after
doing some digging and to see if I've done a good job.
Once I've cleaned this out I'm going to be pouring some
water in here and hopefully it'll drain towards this area.
Let's hope that it works.
Roll it Joel.
Nope.
Alright, so the water is here and the trench is here.
Maybe I can make some canals.
Well, you know the drill.
I can hear you Joel.
Ah, that's it.
We have a trench.
So at a Diede´s request we have dug down 30 centimeters up here and made a slope
going right the way down to our trench at the end.
I've dug our trench to be the lowest point in the
room so that when it drains it'll all lead down here.
I've dug it at a width of about 10 centimeters for our 8 centimeter pipe.
So it was a very challenging job but I'm glad we have
it finished and we're ready to move on to the next part.
Now with the inside of the ruin cleared out we're going to start clearing all this
soil from the side here to give us better access to this side of the ruie.
And we're going to spread it over the back of the ruin.
Thankfully I had help digging this part.
Finally the renovation is starting to feel smoother.
Very friendly.
Now we're bringing it somewhere safe.
Lovely dirt pile.
Look at that flush stroke.
Look at this.
What is it?
I have no idea. I think it might have been a sheep once
but it's all torn up now or someone's knitting project maybe.
It's crochet.
I think I bought one of these at a market before.
Oh okay.
This is the rest of their knitting project.
That actually looks like somebody's sock.
Oh my god there's roots going through it. Holy ****.
I mean holy smokes.
Are they shameful socks?
Shameful socks. Yeah.
Okay so now we're going to take out this top step
here to give us a better angle at the ruin wall.
And maybe later we might take out these ones because
we could probably use this stone for building later.
We are leveling here the ground to create a
nice surface to hang out next to the granite ruin.
Very cool.
So now we've freed the wall and we've
removed all the soil from this hill and the stairs
and we've used the soil to coat this area to make a nice level working surface.
The outside area is clear.
Now we're ready to start renovating the walls.
But Colline can tell you about this.
This is what we call a drywall.
That means that all the stones are already
positioned in a way that they don't fall whatever happened.
So they're being stuck with smaller stones and everything.
This kind of structure creates a lot of holes
and in order to have an insulated ruin we're
going to have to fill those holes with a mortar.
And the mortar we're not going to make it with cement of course.
We're going to make it with clay.
That's when it gets tricky.
Where do we get clay?
And we asked the local for this and they
pinpointed on a map, sort of a hill where we could excavate clay.
So let's go.
Don´t do this at home kids.
These kind of places it's really hard to find
there is not really maps or any really reliable sources
especially on the internet. What we did was asking
the locals all the tiles factory old brick factory
Where's the clay guys and eventually we ended up
with a source that told us that around this hill
There might be some people excavating clay in the past and
we're kind of getting the leftover from the piece of the cake
And we're next to weird bunkers
sketchy as we like
Look at those layers
That's a nice clay right there.
Colline, are you happy?
Yes.
Some top quality clay right there.
Big chunks
Are we happy with the harvest?
Yes.
Look at this.
Great harvest!
Alright, we got this clay excavated from the
hill and when we made some tests we realized
that this clay is not pure, the one that we excavated.
So that means that it has a lot of silt or
sort of like very thin sand in it and once
applied on the wall it started to crack.
Meaning we need to revisit a bit our ratio and especially we need pure clay.
But thank God we got another tip from some
neighbors that there was an old abandoned
brick factory here in Portugal and we're going
to go there and see if we can extract as well
some clay there.
Is there a way to back up after?
Yeah.
No, we keep going, keep going, keep going.
Oh, stop stop stop.
Yeah, it sounds we got stuck.
We're stuck again.
It's ok, we're not in a place we shouldn't be or anything so.
If you want to get stuck somewhere it's when breaking into a factory.
We're not breaking in, there is no gate..
Attempt 1
Attempt 2
Attempt 3
Attempt 4
Next attempt, wood planks and stones.
Keep it real.
Attempt 8
Okay, another spot that we found is also this old tile factory and
here the clay is completely pure and
also it's dry which makes it lighter and easier for work to work with.
So we're gonna dig also a full pickup out of it and use it for our ruin.
This is when it gets really technical.
So we have there the old first clay that we excavated at the hill
with a lot of silt, meaning don't need to add a lot of sand.
Then we get this new clay. Full pure clay.
Perfect to work with.
So that means this one we don't need to add a lot of sand.
This one is the perfect binder. So what
we're gonna do is we're gonna do 50% this one,
50% this one for the mix. Put it with water,
mix it till you get that Greek yogurt kind of suave mix,
and then you add some sand in it to have a good mortar.
It's quite an intuitive practice and it's
also very technical and hard to show on camera.
So if you want more detail or you need information to make your own ratio
back where you are at, then you can reach for us on the research module
where we are explaining all the tests that we're running.
So go there and all the information will be there for you.
Next step for the ruin is to do clay mortar.
That means putting clay mortar in between
those rocks that already stand on themselves.
But in order to do the clay mortar, we need to
get rid of all the organic matters on the wall.
The ruin has been exposed to a lot of time and a
lot of rain and now it's all mossy and organic.
And unfortunately, it's not compatible with the clay mortar.
So we're going to scrape it off, dust it out, get rid of all this organic matter,
and then we can start the clay work.
Cleaning, this is it.
Glasses of protection.
A little mask for the dust because we don't know what's in the dust.
And the magnificent tool, the metal brush.
Let's go!
For the outside, we'll be scraping a bit more so
that we have room for the exterior layer of lime.
Because lime is waterproof.
So the extra lime layer needs a bit more space if you want a nice smooth seam.
So on the outside, we scrape a lot.
And on the inside, we scrape just roughly so that the organic is out.
And our next step is going to be to fill all
the holes, the gaping holes between the stones
with a mix of clay and sand.
I did a previous test to see two days ago and it's cracking a little bit,
which makes me think we need to add just a tiny bit more sand to our mixture.
Otherwise, it looks good.
Let's go for the mix.
But first, I wet the wall.
Anyway, possible sponge, hand, good throw, brush.
And it's good time.
It fits here.
Okay, it's day six.
So we've been applying a new layer, way
more sandy to fill the cracks and it's working.
So it's perfect.
Look at this.
This is from two days ago.
It's very sandy, so it crumbles a bit.
But this is not a problem.
The most important is that it's crackless, baby.
Smooth.
So today, I'm going to be removing this concrete patch
stuck to the wall from when the two rooms were separated.
And I'll be using my impact drill.
And this is our last piece.
So let's get drilling.
So now we've got all of the concrete gone, a nice clear wall for us to work on.
And the next thing is to get some clay and some lime and slap it all over this.
Wall is done.
Holes have been filled.
It's been quite an adventure to
have all these holes filled and all this crack.
Stop cracking.
But in the end, I think it gives a very good result.
And this mortar is going to act as an insulation.
It's going to prevent wind from flowing.
Of course, it's a closed habitation.
And it also regulates the temperature inside the room, much like the stone.
It's really cool work.
And now we can move on to the next step of the ruin.
So the preparations for the ruin are done.
And in the meanwhile, I've been busy with the design.
So let's have a look.
So this is a virtual model from the existing ruin.
First, what we're going to do is to build up the
north and the east wall like this to create a higher room.
Because currently the ruin is pretty low.
After this, we're going to make an opening in the east wall.
This wall is a bit structurally unsafe.
So we have to rebuild it anyway.
So we decided to put in a big window here.
The first thing we're going to do after all this stonework is to make the
in-between floor with wooden beams and our classical basketball floor finish.
After that, we can go ahead with the main structure,
our main beams, making the roof on top of the ruin.
But also a large roof in front where we have the
stone terrace to create this covered outdoor space.
Next up is to make a new window frame in the
east wall to make sure the stone structure is safe.
After this, we put on planks on top of the main beam.
On top of this, we can put rafters from north to south.
Fill it up with insulation.
Put on top a water barrier.
And after that, we can make our rafters and our
battens to place our reused roof tiles on top.
With this, the main structure of the ruin is finished.
All we have to do is build our windows, put some doors inside, have a nice granite
window frame around and fill up the wall on top of the windows.
And the ruin is finished.
To finish it, we add some fixed furniture.
There would be a small kitchen underneath the terrace and another sink over here.
The indoor space we leave as open as possible to be flexible in the use.
So this is how the ruin will look after we finish all the work.
That was it for this update.
If you want to see this design come reality, keep following us.
Thanks for watching and see you in the next update.
