Beginners guide to throwing a Vase part 1 (cylinders)

Handicraft occupation
458 followers
#vase #ceramic #pottery #handicraft
Not gonna lie, it was pretty hard to purposefully mess up a cylinder multiple times in order to show all the little tricks. this time were just going to make a regular old tall cylinder vase in order to get the more basic step of making vases down. next week we will probably go over how to make finer shapes but for a vase we need to get a tall cylinder first.
- wanna send me food and make me fatter?
p.o box : 4540 florin road # E 138 Sacramento
zip:95823
name: Donte the potter
Hello you dirty potters, how are you today? Today we're gonna talk about vases and before we move
on to vases and the different shapes of vases where they come from and how to do them, we need
to get one misconception out of our minds as far as vases go. A real vase does not have to be the
shape we see in museums and on tv and in magazines all the time that look like this. This is a common
misconception. Technically speaking, this is a vase. This is also technically a vase. This is also
technically a vase. And this, even though the hole at the top is extremely small, is also technically
a vase. The reason I'm trying to drill this point into your head so much is because everyone seems
to think that the vases they see on tv or in magazines or museums are this shape right here
and that this shape is the standard and defines what an actual vase is and most people think that
if they can't make something that looks exactly like this or at least this shape, they haven't made
a real vase. Darn tv and magazines ruining the kids perception of beauty and I especially want
students who have this misconception in their minds to know this information because they seem
to put blood and sweat and tears into making this singular shape right here when really all they had
to do was make a cylinder and trim it and that technically is considered a vase. Once you have
that misconception out of your head, making a vase is so easy that this is actually a lidded piece
that I lost the lid to. I don't have the lid anymore, but guess what? This is now a vase. So as
we're going into the vase section of the channel, you need to get that misconception out of your
head. Not every single thing that's Grecian and Fora shaped is a vase. And to tell you the truth,
as long as it's a little bit large and it doesn't have a clear function to it, it can pretty much be
a vase. You see this double hump bottle right here? It is now a vase. You see this lidded piece right
here? Oh no, I lost the lid. But guess what? Now it's a vase. The point of the entire vase section
is honestly to teach you to make larger cylinders and straighter cylinders. We're going to be doing
this section first because a cylinder is the easiest thing to make a vase out of. But don't
think you're out of the woods just yet. The reason we're approaching this section with only cylinders
is because it's now time for you guys to learn how to make taller cylinders and straighter cylinders.
And today we're going to go over a little bit of the tips and tricks it actually takes to make that
experience a little bit easier for you and maybe even pass your class. He knows I'm in school. Oh
my god. Before we get started, there are some basic guidelines to making a vase like this.
Number one, it must be over six inches to be considered a vase. This is not a general rule
for all potters. It's just for this section. The entire point of this section is to get you guys to
make taller cylinders, i.e. vases. And that doesn't really help anybody if you simply make a tiny
little cup and take the handle off and go, oh look teacher, I made a vase. You didn't make a vase,
you made a cup with one less step. So for the first rule, it must be over six inches tall. For
the second rule, you must be able to put at least one flower inside of it. That means you can make
this hole as small as you want, even though technically it would make your job harder if
you did. But you can make this hole as small as you want as long as you can put at least one little
flower or something in there. This technically still counts as a vase. Rule number three,
and this is only if you're making a round vase, you must choke the top or the mouth in smaller
than the actual body of the cylinder or the vase itself. This one's a very specific rule because if
I didn't say this, if you cut this part off and you made this part a lot larger than this part
right here, you would pretty much just have a bowl. I mean seriously, think about it. If you just took
this part off right here, this pretty much now looks like a tiny bowl. And you're gonna go ahead
and try and call this a vase if I don't make this rule. So you can't be doing that. But we're really
just laying down these rules for the benefit of first timers trying to make their vase for the
first time. With all of that in mind, let's get started. Potter tip! Now before we even start to
open up our centered clay here, it's a good idea to cone up and down multiple times. I want this
clay body to be the same all throughout because I'm trying to make the straightest and tallest
cylinder that I possibly can. And sometimes if everything's not nice and even, you get a little
bit of discrepancy at the very top of your pull. To help the pulling process go a little bit more
smoothly, I like to cone up and down multiple times. And sometimes I get a little bit of trouble
when I cone up and down. You see sometimes when I cone upwards, I get a little tiny hole, kind of
like a volcano, at the very top of my center right here. Now this actually happens to a lot of people.
This is a fairly common thing. All this means is that you're putting a lot more pressure on the
outside of your clay body than you are on the inside of your clay body. And that makes sense
because you haven't opened up yet. There's no reason you'd be touching the inside of your clay
because you physically can't. And most people end up just trying to push this down and center anyway.
But here's a little tip just to get rid of this. Go ahead and center down like you normally would
with your two thumbs in place. But this time, put one of your thumbs on the inside of this clay right
here. And keep it inside as you push pressure diagonally this way with this part of your hand.
Just like this. You see? That hole's gone. And to avoid this problem a second time, put a lot more
pressure on the outside of your clay body. The more pressure you put, the more clay on the inside
that's going to move up as well. And if it happens again, just like this, just repeat that process
over and over again until this stops happening. Just push right down with your thumb in the middle
and sooner or later, it'll come right out. Just like this. Okay, we're just going to open up now.
Potter tip! If I decide to open up my cylinder and it's way out here, you best believe it's
going to look like a real awkward vase if the mouth of my piece is way over here and the bottom
of it is way out here. You're essentially going to have a very large flanged out piece at the
and you don't really want that. So while you're opening up that center right there,
make sure you don't go too far out here because you're going to be making a straight cylinder.
And the further you pull it out, the less clay you're going to be able to pull upwards. So try
and decide how big you want your bottom before you actually start pulling upwards.
When you start to pull your very first cylinder vase, especially with new beginner throwers,
you'll end up pulling your wall a little bit flanged outwards just like this. And this is
not what you want. This is not a straight cylinder. So before you even attempt your
second pull, I suggest you choke inwards. And choking is extremely simple, especially if you're
a beginner and you have a rather thick clay body. You can simply put two fingers on the inside,
two fingers on the outside, and then place your thumbs right at the bottom down here
and just push inwards just like this all together.
And when you get to the top, make sure you hold your fingers down here just like this.
And there you go. You've choked in your cylinder. Now when you're pulling a taller cylinder,
sometimes some parts of the clay are a little bit weak or you're putting a little bit too much
pressure on the cylinder. And this is okay. This usually happens with beginners. But as a result
of that, your clay body is going to twist somewhere. This is a sign that number one,
you're either using too much water or number two, you're overworking the clay body and putting too
much pressure on certain parts. And there's a couple things you can do about this. Number one,
you can learn to pull really hard at the bottom and slowly ease up on the pressure as you're
pulling your cylinder, especially at the top. All the stuff down here is already formed. You're not
going to pull that anymore. But if you put more pressure on the top, it's going to end up twisting
the clay body. This clay body down here is already set and you're essentially slowing down the clay
body up here by putting a lot of pressure on it. This will cause a difference in pressure on the
clay and it'll start to twist just like this. Second thing that you can do is a little bit of
cheat code. Go ahead and get your wooden potter's knife, let the inside of your cylinder real nice
and get the pointy part of your wooden knife and put it right up against the very bottom of your
cylinder just like this. And remember to make it extremely straight. You don't want it like this
and you don't want it like this. You want it as straight as it can be just like this. Put it at
the very bottom just like this your cylinder and push the clay body from the inside of your cylinder
to the outside of this wooden knife right here. And remember to keep this hand extremely stable
because this is what you're going to be using to make your very straight line.
You can most likely get one more pull out of a cylinder that you've done that trick with,
but you do have to remember the part in which started to wiggle is still weak clay. So if you
do decide to pull one more time, make sure to pull a little bit of pressure off on that one area.
And that's pretty much it. It's kind of like throwing an extremely large cup except for you're
not going to put a handle on it and it's going to be over six inches tall. Although you are pretty
done, I like to give my cylinders a little bit of extra flair, especially if I know they're just
going to be used for a vase. One of the things I like to do with my cylinder vases is either make
them super flat or super thick. And you can do this by getting your metal rib and just pushing
it on the very, very top of your cylinder, just like this. This flatness up here doesn't really
do anything function wise, but it does make it look like it was made for something more than
just being a cylinder. Now it looks like it was actually made to be a vase. The other thing that
I really like to do is get the end of my metal rib or even my wooden knife, any tool with a sharp
edge and make one singular big line right here. This line right here kind of gives it a defining
characteristic. Now it looks like somebody actually put purpose and thought into separating the body
from the very top of the cylinder. It looks a little bit better. It doesn't really add anything
functionally, but it adds a little bit of flair. And the really neat thing that I find about vases
is that you really don't have to cut off or trim this bottom skirt part off. You can leave it on
and it'll still look like a vase. But if you want your cylinder to look a little bit more straight
and thought out, you can technically cut it off and it'll look a little bit more delicate. You see,
it's not the fact that you made a very tall cylinder for a vase. It's the fact that you put
a little bit of thought and effort into making sure that you know that this is going to have
flowers in it and it's going to go on somebody's desk and it's going to look really nice. And these
little accents here, like making a flat top, putting a line in it or making it look a little
bit more elegant by cutting off the skirt that doesn't flange out really gives it that sense.
And I highly suggest once you get your cylinder, go ahead and play around with the form a little
bit and see what you can do and what you like to do with your forms. I'm a fan of the swirly vases
myself. Well, thank you guys for joining us today. I'm really hoping that this video helps some
people out with making their vases to pass their classes, especially for the first time,
because when I was making a vase, it was extremely hard for me, especially because
I had that concept in my mind that each and every vase had to be this beautiful Grecian amphora vase
that I see almost everywhere in social media. But even though this is technically just a cylinder
with a swirl inside of it, this is still a vase. Well, thank you, Dirty Potters, for joining me
today. If you'd like to see any of my artwork, the links are always down below for your beautiful
potter eyes to see. And I will see you Dirty Potters next week. I already know 100 percent
there's going to be somebody who's going to comment down below, Oh, I didn't follow the
rules that you told me and I made something that looks like a vase. Those rules are only
for the context of this video and specifically for beginners. If you're over here making Grecian
amphora vases, you're clearly not a beginner. Now go sit down, you attention-needing,
unfried chicken nugget.
