Sạc ắc quy Kita Dina 12v 20A tự động, sạc thông minh đầy tự ngắt, chống ngược cực, chập cực

DIENNANG VN - Ắc quy-Ổn áp-Máy sạc-Inverter-Acquy
311 followers
Sạc ắc quy Kita Dina 12v 20A tự động, sạc thông minh đầy tự ngắt, chống ngược cực, chập cực
Có chế độ sạc riêng cho bình AGM, chế độ sạc riêng cho bình khởi động
Và chế độ sạc riêng cho máy phát trong trường hợp cần sạc ngâm
#sacacquy #sactudong #sacthongminh #sacdiennang #acquy #smartcharger
Hello everyone, welcome back to my channel
My channel specializes in reviewing
Acquire products and chargers
Today I will introduce you to a very smart charger
It is the KITARINA charger
This is a fully automatic Smart Changer charger
But it has a great feature
It has a line adjustment mode
Let me show you
This is the line adjustment mode
On its display clock
It has voltage, current, temperature and wattage
This is the current charged
This is 13.4V 13.2A
I will adjust the battery level
Its battery level is 2A
This is a 12V 20A charger
Its battery level is 2A
I will adjust the battery level
Its battery level is 20A
The line of its battery level is 20A
I put it in the middle
Its battery level is 14A
This is the line adjustment mode
It is very convenient
You can charge from 5A to 200A
Because you just need to select the right line
For example, I set the charging current to 11.3A
When this bottle reaches 14.2V
I set the level to 14.4V
When the charging current reaches 14.2V, that is, it is about 90% full
The charging current will decrease by half
The purpose of this is to let the remaining 10% of the bottle
When the bottle is almost full, the charging current will decrease to protect the battery
And the charging current will enter very slowly
Here you can see there are two parameters, 13.8V and 14.4V
This is also the smartness of this type of charger
As we know, the battery charger has two modes
One is the Boost mode or Quick Charge mode
Circuit Use
We will set the level to 14.4V
When the charging current reaches 14.4V
It will notify that the bottle is full and all the lights will be turned off
Because the bottle is full
But when the charging current reaches 14.2V
It will reduce the charging current by half
This is the Quick Charge mode
It boosts up to 14.4V
When the bottle is full, all the lights will be turned off
The charging current will decrease and it will stop the battery voltage at 13.2V
To protect the bottle
Like many Chinese chargers
The charging current is 14.4V
The charging current is too high and it is not good for the bottle
The second level is 13.8V
This level is a standby charger
It is used in the case of using a clear source of UVS
Or charging for high-end power generators
As you know, the power generator has a bottle to start
But sometimes power generators are used
So there is a charger to charge the bottle
If the charging current is too high
It will cause the bottle to be dry during the epidemic
The bottle is hot and reduces the life of the bottle
So at 13.8V
The charging current ensures the safety of the bottle
As well as the life of the bottle
The second level is 13.8V
When the charging current is high, the bottle is dry
Because the charging current reaches the voltage level of 13.8V
And the bottles can be charged
But I leave the charger to 14.4V
If you want to change the mode, you have to turn off the machine and then turn it on again.
As you can see, the voltage is not yet in the 2nd stage.
These are my parameters.
This is the structure of the machine.
The cover is painted with electrolytic paint.
The front cover is fully painted.
There are fans on both sides.
There is a power supply inside the machine.
There is a power supply and a circuit board.
There are two fans on the back of the machine.
A fan to dissipate heat from the circuit board and a fan to dissipate heat from the machine.
This is the switch.
All components and devices are high-end products.
This is a very smart and safe charging line.
Thank you for watching.
