Making a one-hour dress but it took me a week | Refashioning a failed Regency-era gown

Pre-modern Women's Fashion
182 followers
11 Video Views·Aug 21, 2024
Hi I'm Dixie and earlier this year I posted a video about how I remade an old failed costume
into something new and I'm back again with another costume fail that I mentioned in that video.
My first ever Regency dress. First of all it does not fit so I'm not even going to try to put it on
but this dress did not turn out the way I envisioned it. I hacked to pieces the original
simplicity pattern which didn't fit right to begin with and looked goofy into something that
is technically a dress but is kind of a weird hodgepodge of different Regency decades. The
sleeve shape is early Regency, the closure is later Regency, the skirt is somewhere in the middle
and this piping was just an attempt to somehow keep the bodice together in the front.
The back droops down way too low and overall it's just a mess and it's been sitting in my closet
ever since I made it. Until now I only have this amount of fabric to work with. I don't have any
scraps left so I thought I could work it into a 1920s day dress and made me try my hand at making
the infamous one hour dress. When I first thought I wanted to do the one hour dress concept I thought
it was a one page tutorial published in a magazine sometime in the 20s and then I realized it's
actually like a full book of multiple variations on the same dress design but none of these really
looked like the pattern shape I'd seen people use to make a one hour dress. The thing that I had seen
looked more like this and this book is a little bit different but that's okay because I think I'm
going to have to change the way that my dress is going to be made compared to the original tutorial
because I just don't have enough fabric to make it work the way these instructions call for.
The book has you take just a few basic measurements including your hip,
your armhole, and over your shoulder from back hip to front. Your waist doesn't matter because
it's a drop waist dress but it also doesn't ask you to take your bust measurement either
which means the book is making a few body assumptions like that your bust is smaller
than your hips which isn't the case for everyone. I took some extra measurements like how wide I
wanted the neckline to be and the length of the short sleeves. First I had to chop off what would
become the skirt portion of my new dress. Anything left I could use for the bodice.
I didn't have enough length to cut the front and back bodice sections of the dress all in one like
the book calls for so I had to cut separate pieces with shoulder seams. Using my measurements I first
drafted the back piece starting at the neckline. Next I drew the shoulder slope using this bendy
ruler that I conformed to my own shoulder line. I knew since my shoulders were so sloped that if I
cut a dress with no shoulder slope at all like this image it would probably look droopy on me.
I drew the arm opening and cut out my back piece then used that to make the basic front piece and
edited from there. One thing I did differently was to make my front piece slightly wider just because
well if you have a bust most of that volume is going to be in the front. More so for people
with bigger busts than mine. I also cut the back armhole area a little longer than the front.
This gives me a little more space which I need for my rounded upper back. Well I sewed up the top
portion and it's looking pretty good. I think I may have overestimated this shoulder slope a little
bit over here because if I pull this together you start to see these lines. That means my shoulder
slope is probably too severe but that is okay. I may have needed to add more room in the back hip
but that is okay too because I need to split this down the middle to add a center panel and I can
add more width in that way and then that will hopefully add to the back. But otherwise my
side seam is pretty straight which is also good. All right so we're getting somewhere.
I knew I wanted a kind of contrast center panel on the bodice to create that over shirt under
shirt kind of look that was popular in the late 19-teens into the 20s and the only big chunk of
fabric I had left was the former bodice. I knew I wouldn't have a lot of fabric to work with in this
project so I wanted to make some kind of contrast collar. I bought these pre-made collar pieces
online while ordering other costume supplies and I wanted to get free shipping. It's obviously
modern made and the fabric definitely has some amount of polyester in it but I think I could
make it work for this project. I pinned the whole thing to my dress form just to try out different
collar options and I asked Instagram which version they liked best and the winner was the higher
collar which surprised me because I actually kind of like the other version better. Now I had to
take it all apart and attach the center panel for real this time and yes I'm using a serger on this
project mostly because it's fast and easy but also because I have limited fabric and I need to use
the smallest seam allowances possible and sergers sew and bind at one quarter of an inch. I hemmed
the sleeves by hand just because my original skirt hem was also done by hand and I think it makes for
a very clean finish. Since my skirt was basically already seamed and hemmed I just needed to gather
the waist edge. I next attached the skirt to the dress. One issue with working with an already cut
and sewn skirt is my side seams on my skirt don't match the side seams on the bodice but
oh well. The collar went on last and it's just layered onto the neckline
then the narrow seam allowances are folded under and hand sewn down. Since my neckline is more
curved than the inner edges of the collar the collar doesn't lay perfectly flat but that's
all right. When I tried it on I noticed one side of the collar was slightly higher than the other
where it meets the center panel. This is a nitpicky thing that only I would probably ever notice but I
still want to fix it. I took just a few inches of the center front apart to re-ease it back in
and it probably stretched in the first place because this fabric actually has a tiny bit of
spandex in it. I finished this outfit just in time to wear to a costuming event where we took a tour
at a local railroad museum. I figured 1920s would fit right in. I'm wearing this over my
1910s chemise and corset. You obviously don't need to wear a corset for the 1920s but
I needed some way to easily hold up my stockings and my corset has girder straps.
I'm also wearing my new Edwardian shoes, some cotton gloves, a vintage necklace, and a hat I
didn't document because I literally made it the day before the event by unraveling a thrifted
straw hat and trying to form it into a cloche style. It might be a little dark for the rest of
my outfit but hey you gotta work with what you have. I'm so glad I was able to remake my old
dress into something wearable. The 1920s can be a love it or hate it kind of fashion. It doesn't
mesh well with modern beauty ideals but if you haven't already I urge you to give it a try.
Sometimes sewing and costuming is all about getting out of your comfort zone.
Let me know in the comments what you think about 1920s styles and if you've ever refashioned an
old costume. Thanks for liking and subscribing. Until next time, happy sewing!
