The Best Wood For Wood Carving (With a Dremel / Rotary Tool)

Wood carving: Tips and Tools
229 followers
Hey guys, in this video I wanted to go over some of my favorite and least favorite woods to carve,
just so you get an idea when you're choosing a wood before a project. I will start this with
saying this is for power carvers if you're new to this channel, not for whittling. If you're
whittling, use basswood. All right, let's get started. Start off with black walnut. This is
actually my favorite wood to carve. You get these nice sort of patterns in the wood. It's a medium
kind of hardness when you're carving, so it's not too difficult, but it also allows you to get a
really nice shiny finish without having to add anything onto it other than oil. It's also
inexpensive, so you can go to like almost any hardware store and pick up a slab of it. Here's
some that I was using previously. Next I'll go to mahogany. This is my second favorite. It doesn't
quite have like the differences in colors as the walnut does, but you know that can be good for
some projects and not so good for others. I actually got confused when I was making this. I
thought it was walnut. I didn't realize it was mahogany, but it acts very similar. It holds
detail well. You can see the eyes there. You get a nice shine with it, and it's pretty easy to carve.
Here's a raw block of it. The darker lines are mahogany. The white ones are
from maple. The most common wood you're gonna find is pine, and I made this sort of knife-looking
thing a while ago with two different kinds of pine. I really don't enjoy working with pine. I
stay away from it. It has these knots, and you'll find that the growth rings are a lot harder
than the wood in between, so your tool kind of gets stuck, and it's hard to get consistent lines.
Also because it's so soft, you'll see like around these dowels that it's splitting. It's hard to get
a nice shiny finish on it, as you can see. It's really cheap. It's everywhere, but I would stay
away from it when you're carving. So wenge is a fun one that I don't see too often, but I love
the color that comes out. These darker lines are a lot harder than the lighter ones, so if you're
using something like a polishing wheel, you'll get this really fun texture. This one doesn't have it
smooth. As you can see, like you can almost get this plasticky finish. There's no finish up in
oil on this, and it's just so smooth. It is a bit brittle, which I don't like. The tail here,
if you can see that, snapped off while I was carving it, so I wouldn't try to get it too thin.
But other than that, it's just gorgeous wood. The next thing I'll go over is maple. I made this
mushroom in this little face previously. I really don't like maple. It's sort of colorless. If you
get spalted maple or curly maple, you know, it'll be pretty then, but that's expensive, and I don't
know. I'd just rather go with wood with a better color. It's also really hard. I'll get a lot of
burns as I'm carving. It takes forever to sand. You can get a really nice finish, and because it
is so hard, it's really durable, so I've been using it to make spoons. I used it to make a comb,
but overall, for fun, I'd stay away. This bear is made of poplar. Now, poplar is an interesting one
because you can get these really nice colors, and it's super soft when you're carving, so it's
really fast and easy. The issue is I just couldn't get a nice finish. As you can see, it's pretty
good, but if you feel it, it definitely feels like it could use some more sanding, even though I just
kept sanding and sanding. It wouldn't really get as smooth as I wanted it to. If you're looking
to carve something quickly and easily, and if you're going to paint it especially, this is
great wood. It's inexpensive, and it's everywhere, but for my purposes, I'm not a huge fan of it.
So, I don't have any examples right now of carvings with oak. This is white oak. This is red oak.
I actually really enjoy working with this. You get these cool little
holes in it, so if you're looking for a super smooth finish, I would stay away from this,
but there's a nice texture if you're into that. It's a little bit brittle, but it's not too hard,
so you can carve really quickly as long as you don't take it too thin and things start snapping
off, because I have had a couple carvings with white oak where it just blows up if the tool
gets just wrong, but I do love working with this. I'll get into some less common woods now.
This is red heart. I picked it up at a local exotic wood store. Honestly, it carved very
similarly to, I would say, walnut, but obviously it's gorgeous. It has these nice colors. The red
used to be a lot deeper before it oxidized. Here's part of the block that it came from.
It worked really well. The only thing is, it's super expensive. I think I paid like $20 for
a pretty small block of it, so if you have something in mind that you want this really
nice finish with and these nice colors, I would definitely try it out. All right, blue gum, aka
eucalyptus. This wood is super pretty when you finish sanding it. Look at this. It almost looks
like plastic, and if you feel it, it's incredibly smooth. It's a super hard wood, so it takes a
while to get to this level of sanding, but I think it's totally worth it. It has these gorgeous
lines throughout it. Nice red color. This one's oxidized a bit, so it's a bit darker now.
Here is a branch that I used to make this. It holds detail really well because it's so hard
but it takes just forever to carve. You'll get a lot of burning as you're carving. I think you can
see a little bit here on the cheekbone. Overall, if you're new to carving, I'd probably stay away
with it from this. It gets pretty frustrating because it's so slow to carve, but you know,
the finished product can come out really nicely. Purple heart. Yes, this is purple heart. It looks
brown. That's just because it's oxidized a lot. Once you sand and finish it, it'll look
similar to that. Nice deep color. It's pretty consistent. Just like the blue gum, though,
it's very hard. You'll get a lot of burning when you're working with it. If your tools aren't sharp,
it takes forever to carve. It takes forever to finish, but you can get a really nice smooth
finish on it. It's just frustrating, so I wouldn't recommend doing any large projects with it.
Also, you might be a little sad when eventually this nice purple color fades into something like
this. It's also super expensive. Honorable mention, plywood. You'd think, you know,
this looks fun because it has so many lines in it and it's really easy to carve, actually,
surprisingly, but you know, it's just impossible to finish. The wood is really light. You can't get
a nice sort of plasticky feel to it unless you coat it with something, but you know, it's a fun
little thing to try. Alright guys, I hope that was informative. Since some of you guys are asking
what woods I use for which projects, if you're curious what tools I use to carve these, I'd
recommend checking out my channel. I'm coming out with a video soon that goes through sort of my
top 10 that I think you need to make things like this. Alright, well, thanks for watching you guys.
See you later.
