๐ ๏ธ How to open Dell Precision 5490 - disassembly and upgrade options

LaptopMedia
183 followers
1 Video ViewยทJul 19, 2024
hello this is Nick from laptop media and
today we will show you how to open the
14-in Dell Precision 14 5490 to see the
internals of this laptop you have to
undo eight Torx head
screws pop the zones close to the top
two corners with a lever
tool this will create gaps in these
sections
then use a thin plastic tool to pry the
sides and the
front after that pop the back with a
lever
tool the battery is a 72w hour model to
take it out unplug the connector from
the main board and undo the five Philips
head screws that keep the unit in place
the capacity is enough for around 14
hours and a half of video playback to
achieve that you have to apply the best
power efficiency preset in the windows
power and Battery menu and select the
optimized power plan in the myell app
the panel self-refresh option is turned
on on in the Intel Graphics Command
Center
you also have to untangle the Wi-Fi
cards cables around the battery housing
storage wise you can rely on a single
m.2 slot compatible with Gen 4
ssds the pre-installed nvme is protected
by a metal shroud when you undo the
single Phillips head screw that fixes
the cap and the SSD to the base slide
the plate to the left to unlatch it from
the
standoff on the inside of the small
metal plate there is a long thermal
pad unfortunately you can rely on just
soldered memory still you get up to 64
GB of LP
ddr5x 7467 MHz Ram in dual Channel mode
which sounds plenty the thermal system
looks competent it has two large fans a
pair of long heat pipes shared between
the CPU and the GPU two top-mounted heat
sinks and a Duo of big heat
spreaders for
