Carrier RTU Heat Exchanger Replaceme
2 Video Views·Jun 1, 2024
Hi, so today we are working on a carrier unit which was red tagged by me because of the heat
exchanger cracked which I found out during the maintenance. So I red tagged, shut down the gas
supply and cut the electrical for the heat. So I just want to show you the crack. I don't know if
you can see. So it's a big hole here, big hole here, here, here. So the screwdriver can't easily go
inside. Okay, so I took out the heat exchanger from the unit. So hole here, hole here, here, here,
here and this, the last pipe, very big hole. It's a big crack. So the life of this heat exchanger
gone. So we have a brand new heat exchanger in our truck. Okay, so the new heat exchanger,
I have assembled the retainer plate here and the whole thing on which the ventor motor will sit
and place a nice layer of silicone. Those are the bunch of gaskets that came with the heat exchanger.
So I think it's ready to go into the unit. But before that, I'm gonna properly
lay out the, properly fix the insulation and make it a little bit nicer.
Okay, so new heat exchanger back in, ventor motor with new gasket, everything is back in.
I have cleaned the burner, flame sensor, igniter, everything. And now we're gonna test it,
turn on the gas, jump the heat, heat mode. Let's turn on the power. So we're gonna let it run
for a while like this so that the oil and other coating will burn and will not enter the building.
So old heat exchanger is there. So that was a big job. So I completed by myself.
It was a little bit heavy to pull the heat exchanger all the way to the roof
by myself. Okay, thank you for watching.

