Đây là 1 video hướng dẫn cho các bạn phương pháp sửa chữa một chiếc radio hiện đại, công việc sửa chữa rất đơn giản mà khi bạn xem video này bạn có thể sửa chữa được, vậy là thế nào để sửa thiết bị điện đơn giản, đó là bạn có đôi mắt quan sát, và biết phân tích tình huống xãy ra cả các thiết bị điện tử hư hỏng, từ đó luận ra pan bệnh hư hỏng của thiết bị điện tử, không riêng gì 1 chiếc radio bị hư mà còn nhiều đồ hư nữa các bạn cũng làm từng bước phân tích như tôi thí bạn cảm thấy công việc sửa điện tử thật sự đơn giản đến mức độ giống như chưa từng bị hư, các bạn cố gắng học điện tử căn bản của Thầy MÒ ( tôi) tôi cố gắng cô đọng từ ngữ và cácg sửa để cho các bạn dễ dàng nắm bắt sự truyền đạt của tôi đến với bạn Hãy Ủng hộ Tôi Từ trang web bán hàng của tôi: https://oled.com.vn
Hey, hey, hey, hello everyone.
Today, I'm holding a radio.
This radio is very modern.
It's very modern.
You can remember and listen to music at the same time.
Inside, there are two very large batteries.
These two batteries are parallel to each other.
It has a very high capacity.
You can listen to music all day long.
Now, why am I holding this radio?
Because it's broken.
I fixed this radio for my mom.
My mom listens to music.
Okay.
This radio is broken.
How can I fix it?
Let's see how to fix it.
It's simple.
If you have electronic devices like this at home,
you can bring it out and fix it.
First, turn on the radio.
There is a button to turn on the radio.
I don't feel anything.
It doesn't work anymore.
Instead of turning on the radio, it turns red.
Now I plug in the charger.
Let's see if it has electricity.
First, I plug in the charger.
Let's see if there's anything else.
Here it is.
I plug in the charger.
You can see that the battery is full.
Or it's full.
In this case, it's full.
The battery is full.
I'm not sure yet.
Let me take the battery out and see if there's anything else.
When I plug in the charger,
if you turn it on and off,
or there's a button here,
you turn it on and off.
If you hear the radio sound,
it means the battery is broken.
And the charging system may be broken.
But if you don't charge it anymore,
or the battery is broken,
then you exclude those cases.
First, I have to take it out.
I'll take a watch and measure it.
If you don't have a watch at home,
what do you have to do?
Take this end and pinch it.
Pinch it, pinch it, pinch it.
There's a battery left.
Now I'm going to measure if there's a battery left.
Yesterday, I did a live stream on YouTube.
You know, I made a wonderful device.
It's a real watch.
As you can see, 4V1.
There's no battery left.
Let's see if there's a battery left.
4V1.
The battery is fully charged.
The reason is that it doesn't sound.
Now I'm going to take it out.
There are 4 screws down here.
After I take these 4 screws out,
I'm going to separate it from the top.
If it's still stuck here,
you have to look carefully at the top.
You have to lift it up.
You have to use a stick to lift it up.
There are 4 more screws down here.
I'll hide it here to fix it.
Now I'm going to open it.
This is what it looks like inside.
As you can see,
since Sony was born in the 1940s,
there has been a Sony radio.
This is the most modern one.
It's built with a chip.
It's all chip.
It's all processed by V.
Now I see,
there's a button that's stuck here.
Can you see it?
The rubber band is here.
It's definitely here.
Now I'm going to take it out again.
An experience in repairing a machine
is that you take the machine out,
you observe it,
turn on the observation mode,
turn on your 192 degree camera,
open it up,
see if there's a cable in here.
What kind of cable is this?
This cable is the antenna cable.
Combined with what cable?
The cable for the iron cable.
Then I observe around it.
Turn on the observation mode.
See what it looks like.
Is it clogged?
Is it discharged?
That's the first observation.
Then you continue to observe.
Here.
This is a concern
not to damage my device.
Now I'm going to deal with it.
I'm glad to see this.
See this switch?
Many previous generations of radios
I turned on this switch.
When it's all down,
it's called a switch.
There's a switch in here.
It's integrated in here.
And this one,
it has this.
It's not dry yet.
Now I'm going to open it up.
Open it up for you to see.
But what do you want to do?
What to fix?
One more experience.
You have to film,
take a picture of Chi's position.
I washed it back and forth,
washed it back and forth,
a little later,
the cable broke,
I didn't know where it was.
So I started calling
or asking the teacher
to help me
where this cable was.
There are many cases like that, guys.
Many cases like that.
Now open it up.
Film, take a picture
so I know where it is.
Is there another switch?
There's another switch here.
Not in a hurry.
Now open it up.
It has a memory card here.
It uses a push-button system.
There's a processor in here.
Do you know why there's a processor?
There's a processor here.
If you want to do it,
you have to have a processor.
This is the screen.
It's not on.
Here's this switch.
This switch is in mode.
Let's see if this switch is still working.
It's not working when I turn it back and forth.
Now I put the battery in.
When I turn it over here,
it's this pin.
You see, it's this pin.
It's connected to each other.
I'll take a stick and poke it
to see if it goes up or not.
Put the battery in.
One can still sing, guys.
One can still sing.
But I'll leave two out
for you to trust.
Okay.
Next, I'll use a pin.
This is a method called
catching the bridge.
This place has no electricity.
I'll catch the bridge where there's electricity
to make it work.
This is the most basic fixing method.
Of the six methods,
you can go to YouTube
and find the scientific list.
Okay.
Let's catch the bridge.
Why don't I see anything?
Now I'll measure it.
I'll put the battery in.
I'll measure it from here.
Here's the power.
Power on and off.
If it's in the port yet.
Here's the port.
Is it in the port yet?
I'll measure it here.
I'll use a watch to measure it.
I'll measure it.
Okay.
I'll measure the two pins up here.
See if it's there yet.
Okay.
4W-1, guys.
Look at the watch.
4W-1.
I'll measure this side
to see if it's in yet.
4W.
I'll turn it off here.
4W.
I'll turn it off here.
It's ready.
But it's not here yet.
Now,
my job is to get it over here.
I'll plug it in.
I'll press it.
I can't see it.
I can't see anything.
Now I'll take this switch off.
Sometimes the mechanism is different.
Now, before I take it off,
I have to take this off.
If you have a power supply,
it's easier to use a power supply.
I'm showing you this
to help you learn
for new people.
If you have a power supply,
I'll use 3V.
3.7V is fine.
Now I'll take this switch off.
Before I plug it in,
I'll take this switch off.
There's a little trick
to help you.
First,
find this switch.
Go to an electronic store
and buy it.
Six of them.
Two,
you can reassemble it.
Three,
it's hard.
You can use R17
or a little bit of oil.
Oil.
Now I'll put the oil in.
This is R17.
R17 has a sprayer.
Now I'll spray it in.
I'll spray it in there.
Then I'll shake it.
It's done.
Leave it for 2-3 minutes.
Shake it.
It's done.
First,
make sure it's working.
It's working.
Why is it not working?
It's working.
Because it uses 2 switches.
This switch has 2 pins.
See?
This switch is for charging.
See?
This is for charging.
The switch is down here.
It has a signal.
Now I'll
plug it in.
I'll plug it in.
After cleaning everything,
I'll plug it in.
Where's the battery?
Here it is.
I'll turn it on.
Okay.
It's on.
But I don't see any signal.
I'll press these buttons.
See?
It's on.
It has a signal.
Now,
in this case,
it has a signal.
In this case,
it's working.
Now,
it's hard to play the radio.
I'll put the memory card in
to see if it works.
Here's the memory card.
I'll plug it in.
I'll press a button.
It's on.
Okay.
I'll press the memory card button.
I'll look at the menu.
Where should I press?
FM.
Music.
Okay.
I'll turn it on.
What's that?
I'll turn it down
so that it doesn't interfere with the copyright.
This is the sound of the radio.
I told you earlier.
Right?
Now,
the radio is on.
I'll press the radio button.
Where is it?
FM is number 2.
Hold it for a while.
It's on.
It's on, guys.
Awesome.
Now,
you know it's done.
But let me explain
why we have to fix it.
We don't have to check the CPU
or the power supply
to fix the radio.
Fixing the radio is very simple.
A day,
you can fix hundreds of radios
to earn money.
It's not a complicated fix.
If you've learned a lot
about technology,
you can open your own shop.
You can sell,
repair,
teach,
and learn every night.
You can do whatever you want.
It's not hard to fix the radio.
There's not much damage inside.
It's made by the creator.
It's perfect.
For whatever reason,
the power supply is too high,
or the battery is connected wrongly,
or the water is leaking,
don't think too much about it.
If you think too much,
you'll learn more.
If you learn more,
you'll learn more.
Goodbye.
See you in the next video.
Now, let's put it back together.
Remember,
you have to put it back together correctly.
Some people fix the radio
and put it back together wrongly.
It's not hard enough.
Some machines are easily damaged.
It's not hard at all.
Now, let's put it back together.
Ladies and gentlemen,
fixing the radio is not complicated.
We just think and observe with our eyes,
ears, tongue,
or mouth,
to see how hot it is.
Don't think too much about it.
Fixing the radio is normal.
Now, we're done.
Let's put it back together.