油畫 — 貓頭鷹

油畫的魔力
39粉絲
5 次觀看·2024年5月31日
Oil Painting Lesson - Snowy Owl
In this lesson, we'll create an oil painting of a snowy owl on gessoed panel.
Hello everyone, Matt here with thevirtualinstructor.com
And in this lesson, I decided to try out a brand new surface.
Now, this is gessoed panel.
But this panel is a little bit different than the gessoed panels that I've used in the past.
Instead of being smooth like most of the gessoed panel that I've used in the past,
this surface is quite coarse and textured.
In fact, you can hear when I rub my fingers over the surface how coarse it is.
It's very much like sandpaper.
This, of course, will affect the brush strokes that we apply to the surface
and the application techniques that we use.
We'll use water-mixable oil paints for this painting,
which will allow us all the benefits of using traditional oils,
so the blending, the slow drying times,
but without all the fumes and, of course, with a much easier cleanup.
Now, one of the most wonderful things about fall and winter
are the color relationships that reveal themselves in nature.
Blues and oranges are especially strong during this time of the year,
and this color relationship is an excellent choice
when you're creating your fall and winter-inspired art.
And in this painting, we'll make a special attempt
to pull out the blues and the oranges
and exploit this complementary scheme.
So let's go ahead and get started.
We'll begin with a light contour line sketch of our subject on our gessoed panel.
Then we can begin addressing the background.
We'll start with a orangey mix of burnt umber and burnt sienna.
This is a light application with a little bit of water mixed in.
Then we can start creating some impressions of some distant trees.
We'll use the same mixture,
just a little bit heavier concentrated with the burnt umber.
To make the values slightly darker,
we can add a touch of Prussian blue to the mixture as well.
For some of the highlights,
we'll add a bit of titanium white mixed with a touch of yellow ochre
to create just the impression of some of the light shining through.
We'll also add a little bit of shadow
by using our mixture of burnt umber and Prussian blue.
We'll continue developing these trees using this process.
And we're just going to give the impression of the trees in the distance.
We're not going to focus too heavily on creating strong details
since in the end, we want this background to appear slightly blurred.
We'll progressively get darker with our applications,
creating some impressions of some shadows,
especially in the lower portion of the picture plane.
Some of these shadowy shapes lean themselves towards a gray.
To create this gray,
we'll use Prussian blue and burnt umber
with just a touch of titanium white.
This will create quite a bit of variety
in color and tone in the background.
And progressively,
we can begin to pull out additional highlights,
again using a mixture of titanium white and yellow ochre.
These highlights will exist primarily on the left side of the trees
since our light source is originating from the left side of the image.
We can also add some indications of leaves.
This is going to help to push our combination of blue and orange in the painting.
We'll allow the trees to slowly emerge from the background
as we continue to add both dark and light values.
As our trees start to take shape,
we can apply additional applications over the top
to create some more indications of some leaves.
Here, our mixture is created with burnt sienna
and a bit of cadmium red.
There's a touch of burnt umber in the mix too
to make the value a little bit darker.
Over the top,
we can create some indications of some highlights
by adding a bit of titanium white.
Again, these highlights are added primarily on the left side
of the collection of leaves.
Now, with the darker mixture of burnt umber and Prussian blue,
we can add a few additional branches and limbs
that are reaching their way through the background.
Since these values are slightly darker,
the contrast is increased.
This makes these limbs and branches appear closer to the viewer.
We'll allow the trees that we created in the background
to stay a little bit lighter in value
and a little bit less in contrast
to make them appear more distant.
We'll add a few highlights over the top of these applications
before adding some indications of some snow
that's resting on each of these branches.
The snow may appear as though it's pure titanium white,
but it's not.
It's titanium white with a touch of cerulean blue mixed in
to give it a little bit of a cooler appearance.
The snow is collected a little bit more
in the corners of the branches
where they meet the trunk of the tree.
Now, we'll add some peaks of the sky showing through.
Again, this is going to push our color combination
of blue and orange.
For this mixture, we'll use Prussian blue
mixed with titanium white
and a touch of cerulean blue as well.
By adding these shapes of light blue,
we start to define the canopy of the forest.
We also can define a few branches
off in the distance as well.
Of course, these shapes of light blue
are added primarily at the top of the picture plane.
A bit of the background is visible
underneath the owl as well,
so we'll add a few darker values there
and add a bit of variety with a bit of titanium white.
Then we're ready to start addressing
the body of the bird.
We'll start with a light blue application.
This is white mixed with Prussian blue.
In areas of shadow,
we can add a touch of burnt umber to the mixture
to make the values slightly darker.
We want the upper right-hand portion of the bird
to be a little bit cooler
and then the left-hand bottom portion of the bird
to be a little bit of a warmer color
and we'll allow a transition
to happen along the wings.
So we'll add a little bit more
of the burnt umber to the mixture
in the warmer areas
and we'll allow more of the Prussian blue
to be dominant in the cooler areas.
This combination of warmer colors
and cooler colors
will help to accentuate
our color combination of blue and orange
even further.
Now we'll go ahead and start addressing
some of the details of the head.
We'll start with the beak.
This may appear like an application of black
but it's actually a mixture
of Prussian blue and burnt umber.
We'll also add this mixture
to the pupils of the eyes
and we'll darken up the areas
around the eyes as well.
Then we can start adding the colors of the iris
and we'll start with a mixture
of yellow ochre
and a touch of cadmium yellow pale hue.
This color can be toned down
with a little bit of burnt umber
to make a slightly darker value.
Then we'll add just a touch
of cadmium red to the mix
to add a little bit more
of an orange appearance.
We'll add a strong highlight
by adding a touch of titanium white
while the paint is still wet.
Then we can go in
with a stronger mixture
of Prussian blue and burnt umber
and make the blacks
a little bit stronger.
Now we'll start working the areas
around the eyes.
We'll want a little bit of a warmer light
coming from the left side.
So we'll add just a touch
of cadmium yellow pale hue
to our titanium white mixture
on the left side of the head.
We'll add a little bit more
of our mixture of Prussian blue
and burnt umber
to create some subtle gray shadows
on the right side of the head.
We can allow the Prussian blue
to show through and dominate in areas
to make more of a cooler shadow.
These brush strokes
are added while the paint is still wet
and then worked in with a dry brush
to create a smoother transition
between the tones and colors.
We're also cognizant
of the directional strokes
that we make in this area.
The directional strokes
should flow along with the form
of the head of the bird.
In this case,
this directional flow
is dictated mainly by the direction
that the feathers grow.
We'll continue to push
the cooler shadows
and the warmer highlights.
We can progressively
make the shadows slightly darker
again by adding additional applications
and then blending
with a clean dry brush.
The ability to work the paint
on the surface in this manner
is clearly an advantage
to working with oils.
Although this approach
can be used with acrylics,
the artist must work much quicker
and perhaps use some type of additive
to slow down the drying time.
Now we'll go back
and make some of the highlights
a bit stronger.
We'll add a bit more
of titanium white to our mixture
and concentrate on adding
these highlights
primarily on the left side of the head.
Again, brush strokes
flow in the direction
that the feathers grow on the head.
Using a smaller brush
and a bit of medium,
we'll pull some of the strokes
over the top of the beak.
Now we're ready to start
adding the pattern and design
on the top of the head.
For this, we'll use a mixture
of burnt umber and burnt sienna.
We'll pay close attention
to the directional strokes
that we make here,
ensuring that we create a pattern
that is as close as accurate as possible
to the photo reference.
We'll allow some of the colors
to mix with the titanium white applications
to create a bit more variety
in the tone and value.
To make some of the pattern marks
a little bit darker,
we can add a touch of prussian blue as well.
We'll still pay close attention
to the directional strokes
that we make here,
ensuring that they flow
along the form of the head.
A few more additional lighter values
are pulled over the top
of the areas of darker value,
and the shadows are enhanced
on the right side of the head.
Now we'll turn our attention
to the rest of the body of the owl.
We'll add a few indications
of some lighter values.
There's one that's right above the wing.
We'll make the shadow slightly darker
underneath the wing as well,
again with a mixture of prussian blue
and burnt umber.
We'll make the shadow
underneath the left leg
slightly darker and slightly warmer
with a mixture of burnt umber
and prussian blue.
We'll continue to work these shadows
until we have a nice base application
in which to apply our patterns
and to increase our contrast
through additional applications
of light and dark values.
We did this to the head
before applying the pattern marks
and adding the details.
We're taking the same approach
with the body.
We're developing some of the warmer tones
and cooler tones
as well as the darker and lighter values
prior to developing the details over the top.
We want to make sure
that we have a nice modeled base in place
before we start addressing the details.
We'll make the highlight
a little bit lighter
on the left side of the body
with an additional application
of titanium white.
We can make this highlight
slightly warmer
by adding a touch of cadmium yellow
pale hue to the mix.
As we continue to push
the value relationships,
we start to get an indication
of the form of the bird
as well as some of the details of the wings.
With our base colors in place,
we can begin the process
of applying the pattern over the top.
Again,we'll pay special attention
to the shapes
to create this pattern.
They don't have to be an exact copy
of what we're seeing,
but they do have to have a pattern
that's similar to what's observed.
Again,we'll use a combination
of burnt sienna with burnt umber
to make these patterns.
To make the values slightly darker,
a touch of Prussian blue
is added to the mix as well.
We want to ensure
that these pattern marks
still feel very warm,
so we want to be careful
that we don't add too much blue
to the mix.
It still should be dominated
by the warmer colors.
We'll patiently work our way
down the wing of the bird,
paying close attention
to the areas of white or lighter value
that exist between each one of the marks.
We also want to make sure
that our pattern feels natural
and not too mechanical,
so we'll pay close attention
to the reference that we're using
to ensure that we create
a natural-looking pattern.
Now we can go back
and start enhancing
some of the value relationships
on each one of the individual pieces
of the wing
by making some of the shadows darker.
We'll continue to create our pattern
on the body of the bird
as we work our way downward.
Again,to ensure
that this pattern appears natural,
we'll allow some variety
in the tone and value to happen.
We'll also allow some irregularity
in the shape of each one of the marks
that we make.
Even still,
when we're creating this pattern,
the marks that we make
flow over the form of the bird.
This pattern actually helps
to create the illusion
of the form of the bird
as we add the pattern.
The pattern alone
appears unnatural at this point,
so we'll need to go back
and soften up some of the edges
of each one of the pattern marks
with a mixture of titanium white
with just a touch of burnt umber mixed in.
By softening up the edges,
we create a more realistic appearance.
We'll also lighten up
some of the highlights,
especially on the part of the wing
that sticks forward towards the viewer.
We can also strengthen up the shadows
a bit further as well.
This,of course,
creates a greater impression
of the illusion of form.
We'll darken up the shadows
slightly underneath the wing of the bird,
and we'll also make the values
slightly darker on the bottom portion
of the body of the bird as well.
A mixture of burnt umber
and Prussian blue is used
to add some shadows
to the right leg of the bird,
this time dominated
with the Prussian blue.
Now we can go back
to the patterns on the bird
and make a few of them
slightly darker in areas.
This will increase the contrast
and make the pattern
a little bit stronger.
Along the right side
of the body of the bird,
we'll add a strong indication
of some light
that makes its way around the body.
We'll use titanium white for this.
This application
will make the bird stand out
a bit more from the background.
We'll add a shadow
with a mixture of burnt umber
and Prussian blue
underneath the talons
and a highlight
with a mixture of Prussian blue
and titanium white.
We'll also use this mixture
of Prussian blue and burnt umber
for the actual claws on the talon.
Now we can address the mountain of snow
that the owl is resting on.
We'll start with a mixture
of titanium white
with just a touch
of cadmium yellow pale hue.
Then we'll go in
and start defining the shadows
with a bit of Prussian blue.
There's just a touch
of cerulean blue mixed in as well
to give a little bit more variety
to the blue.
On the left side
where the shadows are slightly warmer,
a bit of burnt umber
is introduced in the mix.
Then with a bit of titanium white,
we can soften the transitions
between different values
and also add
a few additional highlights,
especially on the left side
of the mountain of snow.
We can make the shadows
slightly darker
with an additional application
of Prussian blue.
Using the tip
of the stiff bristles of the brush,
we can add additional texture.
A couple of stronger shadows exist
on the top of the mound of snow as well,
so we'll add this
with a bit of Prussian blue.
We can also add additional texture
to the left side of the mound of snow
and do some fine-tuning
to the shadows
just underneath the owl.
Lastly,
we'll add a strong indication
of highlight
just around the edge
of the right portion
of the mound of snow
where light's making its way around.
And now our painting
of a snowy owl
using water-mixable oil paints
is complete.
If you enjoyed this video,
then I know that you enjoy
being a member
at thevirtualinstructor.com.
Our comprehensive membership program
includes video courses
on drawing and painting,
weekly live lessons,
e-books,
lesson plans for teachers,
weekly critiques
and much, much more.
To learn more about our program,
just visit
thevirtualinstructor.com
forward slash members
or click on the card
in the upper right-hand corner.
And if you want to check out
three of our course modules for free,
you can do so.
Just click on the link
on your screen now.
And if you're watching this on YouTube,
make sure that you subscribe
to the channel.
I look forward to seeing you
in the next video.
