From Africa Twin to Africa Grom | Making the perfect adventure bike: Rally Raid

Motor Club
67 followers
Since 2008, Rally Raid Products has been making some of the best enduro kit on the market
right here in Northamptonshire.
So really you've got to wonder, why have they been taking an interest in my Africa Grom?
Rally Raid started really from my interest in motorcycles going back 40 years of trials,
enduro, motocross and then lately got into rallying.
We went and did some rallies in Morocco, mainly on EXC, converted enduro bikes, and then we
got into the KTM 690 enduro when it first came out, which was really a side shoot of
the 690 rally bike, so for us it was great, it got loads of power, and off we went really.
And then soon realised there was not a lot of aftermarket parts on the internet or in
shops at the time, so as I already had an engineering business, we started developing
our own parts for our own bikes for a group of friends, and just thought I'd sell a few
on eBay to start with and was swamped by the interest, and from the worldwide interest,
so that was really what kickstarted Rally Raid as a side shoot to the moulding and engineering
business that we already had.
The TWARAG rally that I first did in 2008 on the EXC, that quickly progressed with the
690 the next year, and then we soon realised that the bike itself was a great rally bike
with just a few alterations, so with the Evo 1 kit, which was a bigger tank, we also had
a rear tank option for really long liaison days, and then a fairing with the road book
and all the navigation equipment, that sold really well, it raced really well, and we
then progressed onto an Evo 2 using all the things we'd found from the Evo 1, developed
it even further, we then decided we were going to go to Dakar, and because the 690 is over
the 450 limit, we didn't want to go out and buy a 450, because the 690 was a really good
rally bike anyway, it ticked all the boxes, the only thing that it didn't tick was the
fact it was a 690, so we then decided to develop our own crankshaft and piston, so
that we could downsize the capacity from a 690, which was actually a 654, down to a 449cc,
by shortening the stroke of the engine by 25mm, which took us a lot of work engineering
wise, but that's the sort of thing that we get a bit of a buzz out of, to try and do
something different, and it was a real good engineering exercise, and it was a real experience
to go to South America and do the Dakar, with our own bike. The KTM 690 really started off
the business as a rally kit, but then we soon realised with the interest people were using
that bike for overlanding and travelling, that there was an even bigger market for an
adventure kit, so the rally kit quickly became an adventure kit, and that then opened up
the business to a whole new range of riders, rather than competition riders, we were getting
more and more orders and interest from riders who were just travelling, doing overland events,
just travelling on their own, and they were looking for very heavy duty proven kit that
worked for themselves, so it was a fairly easy jump to go from rallying to adventure
market, and then we'd had a few years doing the KTM 690, and we realised the adventure
market was a much bigger market than the rally market, so we were looking around at different
bikes that were coming out at the time, and the first one was the CB500, which we realised
was, although it wasn't sold by Honda as a mainstream adventure bike, we realised it
pretty much got all the boxes ticked, the fact it was really reliable, reasonably inexpensive,
parts were available worldwide, and although it was under most people's radar, we soon realised
with a bit of work to the suspension, that it really was a very good all round travel bike,
so we quickly did some work on suspension, we made heavy duty spoked wheels, and then the next
thing was to go out and test the bike, we'd done a bit of riding in the UK, but then I
went out to Australia, we did a two week trip around the Simpson Desert and the Outback,
all the other guys were tending to be on enduro based bikes, and I just rode the ring off
the little CB500, and it really didn't miss a beat, and it proved that underneath the
bike was a really good small adventure bike, and that's the way we've been tending to look
is the middleweight size of the market, rather than the big bikes, because most of our customers
tend to be travelling solo, so they're not looking for massive power, they're actually
looking for something that, one, they can pick up if they drop it, and two, that's got enough power,
but it's easy on tyres, easy on chains, and easy on fuel, which when you're travelling,
that's the main requirement, and as soon as you start looking at a bike that's doing all of those
things, you suddenly realise you don't need massive fuel tanks, you don't need a lot of tyre
changes, because the bikes will perform with what they've got, and then a couple of years
later, the BMW sort of surfaced, and again, it was something we were looking at, we went
and tried the OEM bike as it was, and again, it was similar to the Honda, it was a pretty
good basic bike, but it still stopped short in the fact it had alloy wheels, fairly budget
suspension, the riding position wasn't that brilliant stood up, so we did a similar thing
to what we did with the Honda, we did the spoke wheels, tractive suspension helped us to upgrade,
we came up with some different footrest, different bar position to help with the standing up,
which you tend to be doing when you're off-road, and then the next thing again was to test it,
and we're quite limited in the UK with off-road riding, we've got lots of lanes, but there's not
really anywhere you can go for a week or two and really hammer the bike, so Adam went out to
Australia and did an APC rally off-road. Yeah, it was an eight-day rally, the majority of the bikes
again were 690s, 990s, sort of DR450s, so far put more performance base than the BMW, but after our
sort of upgrades and R&D development into the bikes that we had at that point, it stood the test,
didn't miss a beat, and it was really capable, and against the bigger bikes, just down to its
sort of weight and agility, which is sort of key for solo riders. It was good to say that after the
event, Adam flew back, but he was riding with Amy Harburg, who works for BMW Australia, and then
she shipped her 310 with our kit on to Mongolia for the BMW rally, so she was working there as
instructor with her 1200GS, but then straight after, she unloaded the 310 from the container
as it finished the APC rally and rode the bike all the way from Mongolia back to the factory
here in Wollaston on her own, which proves that, you know, after 20, and when she got here, the
bike had done, what, 27,000? 27,000. 27,000 kilometers, and it had only had oil changes
and filters, so for the future, we've been lucky to work with some really good partners and we've
learned a lot, and we've realized that you don't have to supply a full kit to convert a bike.
There's bikes that are out there, like the Africa Twin, where we've done mainly just wheels and
suspension, that you can do, so we don't have to completely convert a bike. You can just look at a
bike and say, well, actually, it's 90% there, but it's got some shortfalls, and they're the ones that
we can address from an engineering point of view. We can bring the bike in, ride it off-road,
work out what it needs, and pretty quickly, we can come up with a solution, and sometimes it
works from a sales point of view, but sometimes it's too niche, so you just have to weigh it up
as you go along, but going forward, we've got some really good projects going with the new Yamaha
T7, 10, or 8, and then we're always looking out for new models that are coming to the market
for the future. You're not just taking the easy option, and it's because you can do it a lot of
the time, so why do you do it? It's because you can. Yeah, it doesn't have to be a better reason
about the CB500, and I remember pulling up on my KTM 1050 Adventure, and I wobbled up,
and saw John sitting there, and thought, he's a proper rider, and I'm wobbling around like an
idiot, and I went up to him saying, yeah, I'm sorry I wobbled up, but I've been riding this
MSX 125 for two weeks, so I've got used to small bikes, and he went, oh yeah, Adam's got one of
them, he's making spoke wheels for it, and that was it. To me, that was, I've got to buy a Grom
in America, and make an off-road Grom, and it turned out you'd all been doing it, hadn't you?
Yeah, yeah, I mean, I brought the Grom pretty much as soon as they came out, I just fell in
love with it. I'm not really a small bike person, but as soon as I saw it, I was like, yeah, I
definitely want one of those. Why though? Because you're a proper enduro rider, aren't you?
Yeah, but I've always liked the pit bike sort of thing. I'm not really a monkey bike person,
but the Grom had everything, the styling that I wanted, the sort of 12-inch chunky wheel,
supermoto style, so that was definitely a big factor of it, and then probably about a week
after I got it, I started taking it down the green lanes and off-roading and treating it a
bit like an enduro bike sort of thing, so I started looking into ways to make it better,
that's what we do here, so yeah, I started looking into ways to make it better off-road.
There's not much that can be done with the suspension on the Grom, so I started looking
at sort of styling stuff, and obviously spoke wheels is something that we make in-house here,
so I thought I'm in a pretty good position to actually put these on a bike that would never
have an opportunity to have a set of sort of... So you make them all here, don't you?
Yeah, so the hubs we machine here in-house, the rims obviously purchased in, that's the specialist
thing itself, and then we do the assembly up in Birmingham, so we have a group of central wheels
up in Birmingham, and they deal with the lacing and truing of the hubs, because again, that's
quite a specialised job in itself, and we focus on sort of the precision machine inside of it here,
and then outsource the building. But how do you go about... I mean, this is awesome,
it's beautiful, but how do you know what to make? Where do you start with it?
I guess we have some help in the sense that we've already been producing spoked wheels for the 310
and the 500 for a couple of years, so we've kind of had a test run on those. Building a wheel this
size is a bit of a headache, because we've got such a wide rim profile on them, and sort of
getting such a wide rim profile on such a small diameter wheel is a bit of a headache in that
sense, so there was a lot of testing and sort of back and forth in that area, but once we'd sort of
had a bit of measure up, you brought your grum down, and we'd sort of just decided what I want
them to be like, and there was some limitations, things like the spokes, you couldn't have a
straight pull spoke, which is what we originally wanted, so that would be similar to sort of the
enduro bikes. Why is that important? A straight pull gives you a lot stronger sort of tension
around the wheel, they're more durable than a 90 degree pulled spoke, but unfortunately due to the
size of the wheels you have to go for a 90 degree on this sort of design, which is still completely
strong, I mean this size wheel with a heavy duty rim on it and stainless spokes is going to be
indestructible, but for styling reasons it would have been a bit nicer to have a straight pull,
but unfortunately that's just part of development. That was the first challenge wasn't it with this,
because the original grum didn't have abs, so the rear wheel's exactly the same isn't it,
but the front wheel now has this, look at it here, we've got this abs ring haven't we,
so I wanted to keep abs somewhere, you've got the original grum, I've got the new one,
but this wheel will fit both won't it? Yeah, so our hubs are universal, it's worth I think taking
the time when you're developing something to try and make it as universal as it can be, just because
saves on having to machine lots of different parts, but you know the grum's quite a bit of
a headache in terms of the newer ones, because it's such a small wheel, you've got a big brake
caliper on there, there's not a whole lot of room to work with compared to the larger bikes,
so actually getting the sort of abs configuration in that small space is quite hard, I would have
happily done non-abs, but it seems like if you're going to have a grum you might as well not have
abs on one, but obviously the newer ones come pretty fitted with abs, so you have to account
for that as well, and actually the same as the monkey bikes aren't they? Yeah, so these will
also fit on the new monkey 125s, which is quite cool, I know there's a lot of people out there
that are maybe upgrading from old monkey bikes to new ones, and they've kept the whole sort of fan
thing going, so these look pretty cool on the monkey as well, we've had them on one of the new
ones, but for me it's the grum. I mean you can get cheap Chinese wheels can't you, and I think you
guys have had a fiddle with them. Yeah, so when I first wanted a set of spoke wheels I thought
I'd take a pop at some on the internet, there was only one pair available, so the same pair
through multiple sellers, so I just found the cheapest seller on them and they arrived and
they're pretty awful to be fair in terms of their quality, but they were so cheap and you generally
get what you pay for, so once I'd sort of fitted them on my bike they didn't really fit very well
and the machining quality was quite poor on them, so I thought I guess I better start looking at
making my own ones. Yeah, so this is the first set and there's bits you want to refine on it,
so I've managed to convince you to let me buy this set and you're still to make your own set.
Yeah, so in fact this is the fourth set we've done, but the other ones are early development
and we just couldn't get the rims originally sourced in the rims at the right profile because
of the size they are, getting a 3.5 rim folded around to that sort of size is actually quite
hard to do in terms of engineering, so we're fairly limited on sort of what we can do with
rims, but we ended up lucking out and we managed to get the full sort of chunky wide rims on there.
So, I mean, I know you've been, obviously you came on the development for the Africa Twin,
you've had a lot of stuff happening with the GS, when I first came over and we first talked about
this, I mean it was a good couple of years ago, weren't it? Yeah, I think two years ago now.
So you've been doing a lot of stuff since, so how, when have you made these?
Just tea breaks after work, you know, it's just one of those things that
if you really want it, you'll build it.
So the construction really is the key part of the quality of these Grom wheels,
so again, machined in-house, the hubs, that took us a long time to get them,
especially in terms of design and where we want them, because if they're going to go on a Grom
they've got to look cool. Stainless spokes, oversized stainless spokes actually, they're
called Bulldog spokes, they're imported from the US, so they're a slightly oversized diameter
compared to normal spokes, which reinforces that whole chunky adventure feeling.
Nickel plated nipples, which again is a longevity and quality thing, a lot of bikes just come with
stainless or mild steel nipples that have been plated. So why is nickel plated better than
stainless? Nickel is a very long-term sort of solution to plating, it's far more resistant,
because stainless will eventually, not through the stainless itself, but the dirt and sort of
that gets stuck in the stainless, whereas the nickel plating is a very clean finish for a long
time. So while these are, they're quite frivolous really, aren't they? Yeah, they're very overspec
for what they're going in. But I guess that's the thing with everything you've made here,
I mean every time I've been here, I think you take for granted what you're capable of,
it's like this is done proper, isn't it? Yeah, yeah. I guess, you know, this just carries on
the technology in what you do, in your Africatron wheels, your DS wheels, your CB500X wheels. Yeah,
and I think we're all quite proud of the fact that we're sort of a UK-based production company
making stuff that is of sort of a quality to be noticed worldwide, and I mean it's very small
here, there's only a few of us here, and everything's done out of the passion for it,
and I think that kind of shows with the quality that we've put into our stuff, even on the sort
of part-time projects, like the Grom wheels and stuff like that, if you're going to do it,
you might as well do it as best as you can, even if it takes two years.
Do you think you're making more of them? You've still got to make your set. I've still got to
make my set, and if there was someone out there that was sort of really committed to their Grom
and had the same sort of passion, I probably would, but for the time being, in terms of my
time commitments, they are a project that I have to keep outside of the work hours,
because there's people waiting for other wheels. People going around the world. Yeah,
there's not many people out there doing world trips on the Grom, so I have to keep the other
people happy, but if I do get some time, it'd be nice to run some more of these. I'd definitely
like to see them in a supermoto setup as well. Oh yeah, yeah. That'd be really cool.
Some nice supermoto slicks on them. Maybe we need two sets each. Maybe.
