Majolica Experiments - Can Painting This Way WORK??

Making ceramics and glass
106 followers
#MajolicaExperiments #Painting #PotteryTips #Cerami Instruction
Hi everybody, this is Anne. The term myalica is an ancient pottery term. Today, the process
consists of coating low-fired earthenware clay with a white glaze, then painting imagery on
top of that glaze with ceramic pigments. It's then fired again to achieve durable, crisp, bright
imagery. Now, I don't work with earthenware clay. My clay fires to cone 5-6, but I thought it'd be
interesting to experiment with a similar technique with the supplies that I have available and see
if firing to the hotter temperatures destroys the imagery or if I can still achieve a crisp design.
Now, here's a great example of how the myalica technique is being done today.
This piece by Linda Arbuckle was done on earthenware clay. You can see that the low
firing keeps the imagery from melting and bleeding or even fading. Now, I didn't have
time to experiment with homemade stains and glazes, but I had plenty of commercial glazes
and underglazes that I could test and see how they interact with my white glaze. For the test,
I bisque-fired several slabs of clay, brushed on my white liner glaze, then brushed various
colored glazes and underglazes over that. The first thing I noticed was that many of my reds
and pinks really faded out. I did several mixtures of glazes to see if they would blend well, and I
got nice results. Interestingly, I saw my brush marks from the white glaze underneath show through
the colors. Several glazes developed pinholes, so I knew I couldn't use those. I also tested my
underglazes to see how they'd behave as overglazes. They actually developed a bit of a shine on top
while remaining more matte to the touch. Again, I wanted to see how they would blend together.
These two colors looked really good. Let's try a simple design using the glaze combinations that
worked from my samples. I bisque-fired this to cone 04. I first needed to apply the white liner
glaze but learned that brushing was not the greatest way to go. I added water to my glaze
to modify it for dipping, then used an immersion blender to make sure there were no chunks. As this
is just a test, I only dipped the outside of the cylinder trying to get the smoothest surface that
I could. A bigger container would have allowed me to dip just once and coat the entire piece, of course.
Using a steadied pencil, I gently marked banding lines at the top and bottom of the piece.
I'm going to attempt lemons and pears. As I'm working on the fragile flaky glaze, I can't afford
drawing mistakes, so I made templates on paper and blackened the back with graphite. I placed the
lemon where I wanted it and lightly traced the outline. I did the same thing with the pear.
I'm going to start with this light warm colored Pooh Bear Stroke & Coat that looked great on my
sample. I'll be using three sizes of fingernail painting brushes to apply the overglaze. Starting
with the largest brush, I coated the pear with Stroke & Coat. I did leave a little area along
the left edge white to act as a highlight. I applied two coats to make sure my coverage wouldn't
be streaky. I used the smaller brushes to get into the tighter areas. I did the same thing to the lemon
using two coats. I switched to a bit darker warm Stroke & Coat color called Curry Around.
I only brushed this on the right side and up a little bit from the bottom where there would be
shadows. I brushed two coats of that. I did the same thing to the lemon. I already know that mixing
the cantaloupe and the candy apple red worked well on my sample. Let's try it here. On some wax paper,
I mixed the two for a light orange. I applied one coat only to the edge of the pear and a little
where the pear dips in and might reflect the light on the other side. I did the same thing to the
lemon. Using the Spectrum Black number 315, I used my tiny detailer brush to outline both the images.
I also added a few little dots for detail. Make sure you have the fruit painted exactly as you
want it before moving on to the next step. The reason is that the next step involves coating
the imagery with wax emulsion. You can't change your mind once that's down. I'm going to do a
reverse painting technique. In painting, typically you paint the background first, then the foreground imagery.
But here, I painted the foreground imagery first, so I want to protect that plus the areas I want to
stay white in preparation for painting the background. To do this, I'm covering them with
the wax emulsion. Now I can ground the fruit by painting borders along the top and bottom.
This wisteria glaze turns blue at mid-range firing, so I brushed it along the top border.
I can get a smoother coating without having to worry about damaging the fruit.
I painted the bottom border with Spectrum Chamois number 319. I painted two coats of each
of the colors to make sure I had good coverage. Now I can go back and wipe away any glaze beads
with a sponge. Finally, I again used the black to outline the borders. Here's a piece I painted
earlier and fired to cone 5 with a 6-minute hold. I was happy to see that the glaze colors on the
fruit blended well without moving or bleeding. On this piece, I coated the top band with three
coats of wisteria, and I noticed that the glaze did start to slide down the piece in several places,
which is why I only did two coats on the sample I demonstrated for you. Here's another sample I
painted using many of the same glaze colors. I only painted two coats of the wisteria on the
background around the tree shapes without any running. I love that all the colors remain
vibrant and the surface has a nice satiny feel. Let's try one more experiment, this time using
the underglaze to paint the imagery. I started with a bisque piece dipped in the white glaze.
I drew on my border lines and transferred my pears and lemons like on the first project.
To paint the fruit, I'm starting with the intense yellow. I coated almost the entire
piece with this, leaving a little area along the left side white for a highlight. I used bright
orange and mixed a little of that with the yellow, then brushed that onto the right side of each fruit
along the bottoms and continued up the other side a little bit. I added just a little of the bright
red to the shadows to darken them. Those colors are so bright, I decided to tone them down a bit
by using cool blush pink as highlights. I then used jet black underglaze with a detailer brush
to outline everything. Again, I waxed all the areas I wanted to preserve in preparation for
painting the background. I tried this technique earlier on a slab where I used the baby blue
underglaze for the top border, but the underglaze turned gray and streaked really badly. I thought
I'd try mixing the baby blue with a bit of the electric blue to see how that would work out.
I then mixed a little yellow into this mixture for a green and painted that to the bottom border.
Here's one I made earlier with those combinations. I still didn't quite get that light blue that I
hoped for, but the darker blue on this tones down the bright oranges of the fruit. I was happy the
underglaze colors remained bright. The white glaze underneath gave the underglazes a nice visual
shine. Tactily, the underglaze left a somewhat matte feel, but I love a piece with a variety
of textures. I would call my experiments a success. Let me know in the comments section if you've
tried this technique and what tips you'd give for the best results. Thanks to the newest members
of our Little Street Pottery Research Facility team. If you'd like to join the team and earn a
title, click on the Super Thanks button or the link to buy me a coffee. It also really helps
us out if you hit that like button and subscribe to our channel. See you next time in the studio.
