Cách Kiểm Tra Đèn LED bằng tay của Thầy Mò Chưa Ai Làm Bao Giờ Dám Làm Bạn ko làm theo nhé #led

I have to go through this anti-theft kit. You guys watch the lesson to make this kit. You guys turn on the power It's not bright This is the power, the power is bright, but it's not bright, it's not bright, it's not bright, so I take it out and I'll know what's inside This video will quickly guide you how to handle it. For this problem, there are too many deaths, so I should either leave it or I I will fix all the LEDs I replaced all of these LEDs. I asked for it. The children the child The LED is not strong enough I do not stand the rest of the LEDs, the source you guys it's bright, but the degree of the ground is not high This is a LED light, a LED light tray, it has a driver and 220 volts in here and Go here DC power to supply our led list You see, the red wire will go here, here, here, around, around, around, around, around everything. You guys take a picture of your hand. Take a picture of your hand. Do you see it light up? There, now I take a picture up and see it's bright. There is a non-bright one, a non-bright one. A non-bright one, a non-bright one, a non-bright one, and a non-bright one. Proof that our flashlight, how many of these, it is already broken, guys. So you replace it a lot, one, two, three, four, five, six. Step out all. And let's take a look at this side When you pull it up here, the non-luminous ones will appear And you can't see the black LEDs in the light bulb You see Now, let's measure to see if it's really non-luminous or not It's a little bit jittery, remember to turn off the power Turn on the timer 1 And turn off the power Now, let's take a look at the non-luminous ones Let's take a look It's not light up, it's broken What about the non-luminous ones? For example, this one is non-luminous Let's take a look at it Why is this one non-luminous but the others are? Because it's jittery Let's take a look It's jittery, let's turn on the timer Turn on the timer Can you see it? It's both non-luminous and non-luminous Both non-luminous and non-luminous It means that this one is jittery So the power goes through here But this one is not jittery So it can't go through Now, let's turn it on Take your watch Put it over the coal 1 kg Now, let's measure Let's measure It's still non-luminous Can you see it? The light is on And the jittery ones are also jittery Only this one is broken In addition to measuring by hand You can also measure the watch For the 3V led There are 9V, 24V, 32V, 48V Please watch the following videos And in the channel, you will be guided to repair