4 EASY steps to decorate any Christmas Tree. Sharing Pro secerts on how to decorate the perfect Christmas Tree. Step by Step Christmas Tree guide that will give you the best christmas tree decorating ideas no matter you style or budget. Plus, easy Christmas Tree ribbon tutorial and CHristmas tree topper ideas. After visiting Decorators Warehouse in Arlington, Texas (@decoratorswarehouse ) with some friends @TheDailyDIYer @Whiskeyandwhit @CreativeontheCheap @TheCozyChristmasCottage I was inspired by their trees, and could not wait to decorate for Christmas. I absoluty love how they used ribbon, and that is the style I am sharing with you today. You can also follow them on YouTube. They give great tips and decoratings ideas.
/ @decoratorswarehouse Also, Shannon @TheCozyChristmasCottage share a vlog of while we were at the store. Make usre to visit that video and her channel for more inspiration
Today, I'm so excited because I'm gonna be sharing
with you the four steps that you need to decorate any tree.
No matter what your style is,
what decor you have to put on it,
this will work for everybody with every tree.
I'm gonna be sharing with you four different trees,
four different styles.
So let's get to it.
The very first step in doing this
is to start with your tree topper.
And the reason why is because
that is what you are building everything off of.
No matter what your topper is,
you can do a star, an angel, a bow,
a snowman hat like I have here,
or a combination of things like I have a word
that I'm gonna put on this tree as well as some sprays.
Anything you wanna do,
you just wanna start with that top of the tree
and we're gonna work our way down.
Like I mentioned, you can do anything for your tree topper.
And I said I was gonna be using this word joy
along with some sprays.
Now I picked this up at Hobby Lobby
and I did change out the bells
for these more coppery gold bells.
They came with silver bells
and this entire tree will be red, gold, and white.
Now while you're securing your topper,
you want to make sure that you use
either the branches from your tree
or you can use a wire or pipe cleaner if you want to.
I love using the branches from the tree
because it just makes it really easy.
And as you can tell, this is ready to go up
because it just keeps dinging while I'm holding it.
So I wanna place this fairly high up in the tree
and then I'm gonna push some of the branches through it
and then secure it down with some of the branches as well.
Get in here.
There we go.
For the sprays here, I have three different ones.
When I'm looking at sprays,
I like to go with different colors and textures.
Again, I mentioned that this tree
was gonna be red, white, and gold.
Now this is just a soft creamy color,
not quite a gold by any stretch of the imagination,
but I love the smaller berries on here.
Now this is also round, but a different texture,
more kind of snowball-y
and I thought this would be really great.
And then we have a completely different texture
and fabric here with this velvet little curly cue.
I just think these are great.
When you're placing your sprays,
you just wanna alternate them
and just stick them straight down into the tree.
Now I'm working with a nine foot tree here,
so it's a little bit tricky when you're only five foot four,
if I stretch the truth just a little bit.
So I'm just placing these straight down.
I'm gonna alternate them, but not like that.
I'm just gonna be alternating them
and creating the different texture that I am going for.
I think I want this a little bit higher.
And now remember,
you can always move these around and adjust them.
I wanna make sure the balls are facing out
and the stem is facing inward
because the balls are the part we wanna see.
We don't wanna see that ugly stem.
I'm gonna repeat that on this side
as well as on the backside.
All righty.
There.
Let's put this up just a little bit higher.
And then we're gonna put this right here.
The next step that you want to do is to add your ribbon.
Now I personally like to use two different ribbons,
one as your main ribbon and another one as an accent.
You do wanna make sure that they're wired.
And the ribbon is all about the loops and tails.
Now with using two ribbon,
I like to just layer them on top of each other,
drop the rolls, don't even worry about it,
and don't be afraid to cut your ribbon.
To start off with, I like to go ahead and fold my ribbon
and I'm gonna trim from the corner up towards that center.
And that's gonna give me that dovetail, fishtail,
whatever you wanna call it.
It just gives me that really pretty finished ribbon end.
To start off with, I like to actually do a two loop ribbon,
which basically, let's just be honest,
it's just a bow.
So start with your tail, pinch it,
do one loop, twist it.
You're gonna create another loop.
Now this is four inch ribbon,
so it's a little bit harder for me to hold,
but it's gonna get the job done.
Kinda make sure that your little loops
are about the same size.
You can twist it down.
Now, if you're going to attach this directly to your tree
and use your tree to hold it,
you can just go in just like this,
find an area that you can wrap the tree
around that center of your bow and go on.
Now, if you don't have a way
to attach it directly to your tree,
again, use some wire or some pipe cleaner to do it.
It'll get the job done.
So in the center of my tree back here,
it's hard to see, but these are my wiry branches
and it will be perfect to come back in here with my bow,
loop that right around my ribbon.
Now, because this is wired,
I'm able to then manipulate it however I want it,
puff up that bow just a little bit,
and then I can start working on my tails.
Now with my tails, I like to add in some little swags,
bubbles, loops, whatever you wanna call them,
and you're gonna work kind of in a zigzag direction.
Again, grabbing part of the tree, looping it around,
you know what?
I want that to be a little bit bigger.
That was too little for this big, gigantic tree.
We're gonna come in here, grab part of the tree,
loop it around, and then I'm gonna do one more of these
coming down, and then I'm gonna cut my ribbon again.
So come down right there, loop around.
Now that I've done the two loops,
it's time to go ahead and cut the ribbon.
So again, I'm gonna fold it.
I'm gonna go from the outside towards that center,
get that nice, sharp little dovetail fishtail,
and then lay this however I want it to be,
and I like to have the underneath ribbon
stick out just a little bit from that top ribbon,
and then there is your very first loop and tail,
and you're gonna repeat this with single loops,
sometimes just tails.
Okay, so let me show that to you again.
You're gonna take your ribbon.
Make sure you have your end trimmed.
You can stack them on top of each other.
Decide how long you want your tail to be,
and then you're going to create your first loop,
and then you're going to twist your ribbon.
You just need to give it one twist.
Hold it together with your thumb and finger.
You're gonna create your second loop,
creating your two-loop bow.
Again, you're going to twist that one time
so that the ribbon will have its tail,
so it comes straight down when you put it into the tree.
So you're gonna hold all of this together,
and then use the branch of the tree to secure it,
or you can, again, use wire or a pipe cleaner
to keep it together.
If this is really hard for you to hold,
go ahead and add a pipe cleaner right around it,
whether it's a white one or a red one,
whatever one would match the color of your ribbon,
and then you can secure this.
Okay, with this next one,
I'm gonna do just one single loop,
so I'm gonna start, again, with a tail,
fold it over for that loop, gather it together.
That's all you have to do.
Maybe just a little twist
so that when it goes down the tree,
these are on the outside.
The ribbon outside is on the outside
and not hiding like this on the backside.
I hope that makes some sense.
I'm also gonna have the tail coming down this time as well
because I want this to look different
than the original bow that I put up there.
So I'm gonna put one loop right here.
The first tail is gonna come off to the side,
and then I can decide how many of these little swags
I wanna add in here,
and I think this time I might just do,
I don't know.
Let's see what we should do.
So you don't always have to do a loop.
So here, I went ahead, I started with the tail,
connected it to the tree.
I'm gonna do one of those little billows.
I'm gonna add it back here again,
connect it using the branch of the tree,
and then I'm gonna go ahead and trim it off,
and we're just gonna have one single little billow.
Whoops, almost cut it the wrong way.
I'm gonna go outside, inside,
and that is how we get our little dovetail.
Now, if you have like an area that is small
that you wanna still fill it,
or you have some scrap ribbon and you don't wanna waste it,
here's another idea for you.
Go ahead and take your two pieces of ribbon,
make sure your ends are finished,
gather it up in the center.
So this time, you're just gonna have the two tails.
You're gonna tuck it in, wrap that tree around,
and then adjust your ribbon however you want to.
And now you have that area filled,
and you're not wasting any of your ribbon either.
Now, the one caveat to adding your ribbon first would be,
if you are trying to have something
be more of the centerpiece on your tree,
like I have here with the snowman and the snow,
plus the couple of snowflakes I've added,
I wanna put those on first,
and then work the ribbon around these items.
Alrighty, hair is up,
because this means we are doing some serious work,
and let me know, are you somebody
that has to be all glammed up when you decorate,
or messy bun and get it done?
Anyway, the next thing we're gonna do
is add our sprays throughout the tree.
This will help fill it out.
Now, if you don't wanna use any sprays,
you didn't use them at the top,
you're not gonna use them in the tree,
you can skip that step.
But if you are gonna use some sprays,
you want to use some of the exact same sprays
that you used on the top.
So I am repeating some of the same sprays.
All you're gonna do is template,
all you're simply going to do is take your spray,
and you're just gonna stick it straight into the tree.
You do want it to stick out a little bit,
because that is what's adding that texture and dimension
into your tree.
So as you can see,
I'm grouping all three of these in the same area,
even though I'm not stacking them on top of each other,
I'm keeping them all together,
and that adds a little bit more
of that repetitive pattern that we had at the top.
Another idea when you're adding some sprays
is to use the same texture that you've already used.
So this matches those curly cues,
but then it's still round
like those other sprays that we used.
But instead of just putting these in individually,
I am gonna add them in with a poinsettia,
and that way we kind of bulk it up a little bit.
So another pairing is that you can stick
with the same color, but a completely different texture,
and then add it with something else.
This time I'm going in with a different greenery.
These are all from Hoppy Lobby,
but you can grab whatever sprays you already have at home,
you can go to Walmart, anywhere that you can get sprays,
just find ones that go with your style and decor.
If you are doing a grouping like this,
you can also take your stems and wrap them around,
or take one of them and wrap it around the other,
and that will keep them together
when you go to just pop them right into your tree.
I know you're probably wondering
how much of all these items are you gonna need?
That is the number one question that I get,
and it really depends on the size of your tree.
I told you earlier, this is a nine foot tree.
For a nine foot tree,
you're gonna want about 30 to 40 yards of ribbon.
Now, because I personally doubled my ribbon,
I need 30 to 40 yards of each of the ribbons.
Now for your sprays, at the very top,
I have a minimum of three of each sprays
for a minimum of three different sprays.
That's what I like to do.
And then an odd number going throughout the tree.
So for a tree this big,
you're gonna want maybe five up to nine spray
of one single spray,
and about three to five different sprays
going throughout your tree,
if that is a look that you really like.
Now, I've done plenty of trees
that I don't even use sprays at all.
So it really depends on what you're doing with that tree
and what your overall look and vision is.
Now, if you're working with a tree
that's only, let's say, seven feet tall
and a normal circumference,
so not a real skinny tree,
you're gonna want somewhere between 20 to 30 yards of ribbon
and again, for your sprays, you probably want five to seven.
For a skinny seven foot tree,
you only need about 10 yards of ribbon.
That's what I used when I did my little Santa tree,
and it was perfect.
The very last thing that you wanna do is add your ornaments.
Now, when it comes to ornaments,
I always like to start big,
and then I work my way down.
Now, this tree, I do have a few of these round ornaments
that I wanna add,
but this is also the tree
that we add our family ornaments to,
and those are the ones I'm gonna come in actually last
and nestle them into different places
that still have some holes.
So again, you can do these steps
no matter what style of tree you have.
With the larger ornaments,
I just like to tuck them into the back.
Again, by adding some ornaments towards the back
and some towards the front,
you're adding different texture and dimension,
and so I don't even worry about any hangers.
I just come straight on through and pop it in.
Now, when you have a big gap like this,
that's when these little hanging hooks come in really handy.
You can come through and hang on this top part
and then still fill in the gap.
You're just gonna keep layering in your ornaments
until you get the fullness and the look
that you're going for.
Another tip is as you're decorating your tree,
make sure that you step back repeatedly
and check areas that might need to be filled in.
Maybe you have too much of one color in an area.
Just constantly take a look from a further distance.
Now, I would say I'm pretty happy with this tree
except for actually the very top of the tree right up here.
I feel like those red picks are just a little too deep
of a red for the top of the tree
and we need to lighten it up.
So I'm gonna switch those out for these red ones
that I have here,
and I bet it's gonna make all the difference.
Okay, that looks so much better.
Now, remember, you don't have to use all of these things.
You can decide which is most important to you.
If ribbon is what you wanna accent, then use the ribbon.
If it's sprays, go with sprays.
If it's ornaments, go with ornaments.
This is just the steps that you take
as you're adding and layering each one of these
so that you get the tree of your dreams.
Thank you so much for spending your time with me.
I hope I've given you some helpful hints
and I'll see you in the next one.
Bye.
♪ It's cold outside, fire keeps us warm. ♪
♪ We can't spend the night underneath the mistletoe. ♪
♪ And I've gotten you a present that I put under the tree. ♪
♪ Tomorrow it is Christmas, the first for you and me. ♪
♪ The snow is falling down and the storm is on its way. ♪
♪ Everything will be okay. ♪
♪ Cause all I wanna do is spend this holiday with you. ♪
♪ Tomorrow it is Christmas, the first for me and you. ♪