Đây là một video hướng dẫn cho các bạn sửa máy điện tử một máy điện tử Cân Bằng Laser máy này đã bị đứt dây và thợ điện tử khác đã thay bằng dây lớn hơn vì thế độ cân bằng không còn chính xác nữa khi gặp những trường hợp như thế này trong điều kiện khó khăn nhất chúng ta phải biết cách nghĩ ra những công cụ để làm việc và chúng tôi đã tìm thấy được một giải pháp rất hữu hiệu đó là dùng dây đồng của cuộn dây trong driver đèn led đây là sợi dây cách điện nó sẽ thích hợp cho việc đấu nối dây những sợi dây không chạm vào nhau và nhẹ nhàng làm cho hệ thống Cân Bằng Laser được cân bằng tốt hơn với tay nghề điện tử Các bạn đã từng học ở trên inventor 1978 bạn có thể làm được điều tương tự chúc bạn luôn thành công và học hỏi nhiều điều đặc biệt cảm thấy vui lên từng ngày các bạn ủng hộ tôi bằng cách truy cập vào website oled.com.vn
Hey, hey, hey, hello everyone. Today I'm going to show you a great video.
A video that will show you how to repair an electronic device.
A measuring device.
It's a multi-purpose device.
Take it out. Take it out.
If you don't come back, I'll wait for you inside.
But if you come back, my dear friend...
Hello? Hello?
Huh?
I'm in the countryside.
Yes.
Where's the flashlight?
God, it's so far away.
How far is it?
I'm busy this week.
I'm busy this week. I'm so busy.
I'm so busy.
If you come from Saigon, you have to walk 250 km to get here.
This is the construction of Mr. Mo 3 months ago.
Here, you go to Lake Ta Ba to see the scenery.
Then you go to the restaurant to enjoy the specialties here.
In addition, there are many beautiful sceneries here for you to take a selfie, check-in.
Are you comfortable?
Is this a boat?
It's a boat.
It's on the water.
Is the guest here yet?
Uncle, I left the trash there.
Did you see it?
What? Did you call me? I just drank water.
What did you drink?
Did you find that?
Huh?
Which one? Which machine?
That machine?
Do you know why?
It's small in the field.
If it's too big, it won't work.
It won't work.
We need a thin rope.
There are all kinds of ropes.
The rope in the field is thin.
The field is thin?
Don't you have a machine?
I don't have it.
The machine is used to weigh the squid.
What are you looking for?
I'm looking for a hook.
A hook?
Is that enough?
Yes.
There it is.
Can you open it?
There are two hooks.
I can't.
I can't open it.
Two plates of rice.
This one.
It's made of copper.
I brought it to my wife.
It means...
It's too thick.
It won't work.
It won't work?
It's made of copper.
It's too thin.
It has to shake a lot.
How do you find the right rope?
That's why I brought it to my wife.
Let me hang it for 30 seconds.
I'm looking for a copper rope.
A small one.
This one is too thick.
It won't work.
That's it.
It's simple.
There are 5 ropes.
It's too small.
I can't hang it.
The other one is too thin.
It won't work.
This one is too thick.
It won't work.
You have to hang it.
Hang it on the side.
That's it.
It won't work.
It won't work?
That's it.
You have to twist it.
That's it.
It's too thin.
You have to twist it.
Be careful.
What?
The rope.
Is it 500?
No.
It's only 500.
You have to take the rope out.
That's right.
That's it.
Right, Mr. Hien?
In the middle of the jungle.
You have to twist it.
Right, Mr. Hien?
Right.
That's it.
You have to pull it back.
That's it.
Is it a power cut?
It's a power cut.
It won't touch each other.
It will move if you touch it.
That's right.
Just a little bit.
It's thin like that.
That's right.
You have to measure it.
How many pieces?
6 pieces.
Cut 6 pieces.
I have a way to handle it.
I handle the head.
This rope is thin.
This one?
That's it.
That's right.
Make it round.
That's it.
6 pieces.
What?
It's a good quality.
You can just roll it up.
Okay.
I will measure this head.
Pull the power plug.
This power plug is too big.
You can't see the power plug.
That's it.
Put it here.
That's it.
I will make it bigger.
Hold it.
Like this.
Hold it.
Do you have a clip?
Give me a clip.
That's it.
It's easy to fix it.
This clip?
I thought it was a small power plug.
There is a cable.
5 cables.
5 or 6?
5.
What else?
That's it.
Is this clip sharp?
Is it sharp?
You have to know this line.
We usually have a model knife.
My eyes are weak.
It's even.
I think this knife is about...
50,000 VND.
50,000 VND?
I think it's about 50,000 VND.
This is the right way to do it. Why did you try to do it the other way?
Because it was too big.
The other way? The bigger the better.
I didn't think it would be this bad.
But you had to advise me.
I didn't know how to do it.
Ouch!
I'm dead.
It smells bad.
Ouch!
I heard the rooster crow.
The rooster is running.
Let's go and see the rooster.
There are ants.
What do you want?
Do you see the rooster?
Turn it on.
Let's see if it can run.
Can it run?
Is there anything wrong?
It's quiet.
Is it quiet?
It's quiet.
Can you see it?
What?
It's crowing a little bit.
It's quiet, right?
Can we take it out and see if it can run?
See what?
See if it can shake.
It's crowing, right?
Yes.
It's not eating.
What?
Take it out.
There.
Is it working?
Yes.
Do you have glue?
No.
I'll put it back.
Glue or something to hold it together.
It's good.
It's good, right?
Yes.
I'm going to put this in.
Put it in.
Put that in.
I'll give you that one.
You can use it.
I don't have any.
I'll take it.
I'll give you that one.
I'm not old yet.
Thank you.