How To Choose Booties For Scuba Diving .

Diving Technique
83 followers
May 23, 2024
In this quick tips video, I'm going to be giving you my best advice for how to choose the right
wetsuit bootie for your scuba diving. Ladies and gentlemen, welcome to Divers Ready and welcome to
this number 40 in our series we call Quick Tips. We've looked at pretty much every aspect of dive
gear throughout this series, but one piece of gear we haven't looked at yet, which if you get it
wrong will ruin your dive, is your footwear, your booties. Whether you're going to go bare feet or
wear booties and what the different design options are. I'm going to head to the work
bench and break it down for you. If you haven't done so already, make your next dive on our
subscribe button and I'll see you over there. I should start by saying in this video, we're
just going to cover wetsuit booties. We'll cover rock boots for dry suits in another video. Now,
the most important factor when deciding on which wetsuit boot is right for you is, of course,
proper fit. Now, wetsuit boots are sold in shoe sizes because they should fit like a shoe,
which is fine. You just go ahead and order your normal shoe size unless you happen to be
an American female. Now, let me explain. In Europe, a size 40 is a size 40. It doesn't matter
if it's male or female, it's the same size shoe. For some reason in the US, the sizes are different.
For example, a men's four and a half is actually a women's six. In the description of this video
below, I've actually found a handy conversion chart because in North America, most wetsuit
booties that are unisex tend to be sized in men's size. There's a nice little conversion chart there
if you need to find the female size for a particular bootie. Definitely do try on the
wetsuit booties that you're considering. There is no consistency across brands. I've been anything
from a size 12 to a size 14, depending what brand I'm trying on. You want a snug fit. Loose
fitting booties will cause blisters. In addition to that, not only do you want to make sure that
the bootie fits your foot, but you also want to make sure that the bootie fits your fins.
For whichever fin you're considering, for whatever setup you're trying to build,
it's a good idea if you're shopping for booties in an actual brick and mortar retail store to take
one of your fins with you, try the bootie on, and then actually put the fin over the top of it to
make sure that fits as well, and that the toe of the boot fits into the fin pocket nice and snug,
because you don't want your booties to be too small for your fin pockets, and now your fin
is rattling around, and that's really inefficient for propulsion. Ankle height. The next factor to
consider is ankle height. Do you want low-cut, low-ankle booties like this, or sort of more the
high-top style? The low-ankle bootie is ideal for warm-water diving, perhaps when you're just
diving in a shorty wetsuit, or maybe even less, maybe just a rash guard and shorts.
Really good for warm water. Normally come with a soft sole. We'll talk more about that in a moment.
I always like to wear high-ankle booties whenever I'm diving a full wetsuit, just so that I can put
the wetsuit ankle cuff down over the top of the wetsuit bootie, and I'm completely covered from
head to toe. If you do go for the high-top style, make sure you get one with the side zipper,
because they are so much easier to don and off. The other factor you want to think about when
considering how high you want your bootie to be is where will your fin strap lie? If you're using
low-ankle booties, and you have a very thick fin strap, you don't want that sitting above the heel
of your bootie there, because it's going to rub on you, and it's also going to cause blisters,
so then you're going to want to go for a more high-top style. If you're going for little,
thin, almost snorkel-style fins, then you can probably get away with these and just have the
fin strap around the back thickness. Obviously, the thickness of the neoprene does two things.
It increases warmth. It also increases buoyancy. Usually, these low-ankle designs are only available
in a 1.5 or a 3mm thickness, whereas the high-top style, as I like to call it, goes all the way up
to 7mm to match whatever wetsuit you may want to pair them with. Now, if you're adding warmth and
thickness to your ankles, it's very important you consider what fin you're going to pair it with,
because if you suffer from a medical condition known as helium legs and you happen to have very,
very thick wetsuit booties, you're going to have floaty feet. You're going to go into an inverted
position. Suboptimal. So you're going to counteract that by choosing more negative fins to help you
trim out and get the desired body position you want to have in the water. I've said it so many
times on this channel, but I'm not afraid to say it again. Fin choice is one of the most important
decisions when getting your trim correct, and that needs to be paired against the selection you
make on your booties. Sole. As you can see on these ankle-high booties, these have a very flimsy,
thin little rubber sole on them, as opposed to something more like this that has a chunky,
sturdy, almost like a rock boot sole to it. And then going up higher from this, I have this pair
of Aqualungs here, which has a very, very, very hard sole. The sole is really all about protecting
your feet. So what you're going to consider when you're choosing what kind of sole you want on your
bootie is what are your entry conditions going to be. Apart from when you're neutrally buoyant and
swimming along, you'll be walking in these booties in gear in some manner. If you're walking across
a boat deck and doing a giant stride entry, these are totally fine. They're non-slip. They're nice
and grippy. Happy days. If you're walking across volcanic rock to get to your entry point for a
shore dive in, let's say, Hawaii, these probably aren't going to cut it, and you're going to feel
that sharp rock through those soles, in which case you will want to go up to something a little
bit more sturdy. Wear and tear. This is a wetsuit bootie that I've probably put about 300 dives on.
It used to be a three mil. It's not anymore. Remember that neoprene loses its sponginess
over time with continued compressions at repetitive depths. The soles have gotten very,
very thin to the point where I can feel the boat deck through them. So that's obviously not
providing me much protection anymore. And yeah, the general state of them. They're pretty dinged
up and scratched up. The heels are starting to wear where my fin strap will rub against them.
The zipper's starting to go. The seam on the zipper's starting to go. All this to say that
wetsuit booties are a wear and tear item. So when they start to get raggedy, just chuck them out,
get a new pair, and don't spend too much money on wetsuit booties knowing that they're going to
eventually let you down. If you're a new scuba diver just getting your first set of gear,
I hope this video had value for you in helping select the right booties. You might want to check
out our other quick tips videos, which I'll put over there because most of them are gear related.
If you did get value out of this video, consider sharing it with your buddy, giving it the old
thumbs up, or subscribing to our channel if you haven't done so already. And until next week,
ladies and gentlemen, my name's James. Thank you so much for joining me. Dive safe. Dive often.
