【solidworks】曲線系列ep1:相交VS投影|取代3D草圖的好方案|終結無法設計變更的痛點

模艦隊 雷系教師阿儒
1粉絲
還在用3D草圖解決問題嗎?
它實在不夠好用
今晚7點阿儒介紹相交&投影曲線
很神奇吧!不一樣的指令 但是能做出相同的效果
軟體只有越熟悉 才會玩出新高度
唯有挑戰自己的極限 才能越來越強
還沒有加入模艦隊的朋友在哪裡?
邀請你/妳訂閱阿儒 一起用不一樣的方法學建模
影片傳送門:https://youtu.be/rM2fyayv8eQ
還請大家多多給予支持~ 留言給阿儒寶貴的建議 ^A^/
歡迎按讚、訂閱或分享阿儒的頻道喔!
#模艦隊雷系教師阿儒 #solidworks #onshape #3d建模 #3dmodeling #三大建模觀
Hey, have you discovered something?
Where these two curved surfaces intersect,
they form a line!
When you select two parts, a sketch will appear!
Select two
and it will directly create a projected curve for you!
Hi, everyone, Welcome to my channe, I am Aru.
What is the difference between intersection curve and projected curve?
There are actually many things that can be used in curves.
You can see split line, projected curve, and composite curve.
The most commonly used ones are split line and projected curve!
Hey, you might be wondering what a composite curve is?
There's another one hidden here.
What is the intersection curve ? There are really a lot of curves,
but you may not know how to use them?
Let me simply use an example to tell you :
Two different methods that can have the same effect ‼ ️
Now let’s talk about a simple case. I will first draw a sketch on the right plane.
You can design the dimensions yourself.
Do you want to mark the other side again? Need not !
Relations
Draw the right plane again.
Some people might ask : Why do I need to use convert entities to draw it again?
Can't I just draw it directly in the sketch?
If you are interested, you can watch these 2 episodes where I share why I do this.
I am used to it, you can also give it a try using convert entities😉
Do other operations only after copying it !
What did I do before if I supposed to make a curve out of this point?
In the past, I used 3D sketches in sketches to do it,
but 3D sketches are very difficult to control and there is no way to make design changes😮💨
So I don't recommend it.
What is my solution?
If you want to create a spline from this point,
it will have two projected surfaces ! Which two?
The first one is on the top plane.
Make a sketch.
The second one is to use the front plane and add this point to create a new plane.
You can also design the sketch of this plane by yourself !
I first draw the top plane (the first projected surface)
and I can use spline !
For example, it is like this.
⚠️ This is for teaching purposes, so I won't mark the dimensions.
Let's assume so.
pull down the other surface
and draw another one on plane 1 to see what you want to do ?
I'll make it simpler.
Like this.
point + point
make it the same length
, so it's the same length !
Tangent
you want to add...
eh, note here
There's an error because it's not locked.
So you have to remember to lock it.
Then what do you want to add ?
Is it possible to add the dimensions of the semicircle? Also can! (You can design it yourself)
We have two methods!
(1-Intersecting Curve)
First do the configurations, V1.
How to create a 3D sketch using intersecting curve
How do we do it ?
Let me show you !
Top Plane -> Convert Entities -> Extrude Surface
You can set a longer.
Plane 1 again.
Convert Entities (copy the 3 Point Arc).
Do a surface extension (you can set it longer).
Eh, Did you discover something?
Where these two curves intersect is a line !
How do I make it create 3D sketches?
It’s actually very simple.
Search for “Intersect” in the command line.
There is an intersecting curve.
Select the two sides and check them,
and a sketch will be generated!
What about 3D printing
⚠️If you use curved surfaces as auxiliary materials
❗️Please remember to delete the used curves❗️
⚠️If you don’t delete them, your STL file will break and you won’t be able to print it😱
But you You can also modify the drawing.
This is a way.
(2-projection curve)
Create V2.
Top plane -> Convert entities
because this is my original sketch (It can't be moved⛔️)
If you have the original sketch, you can keep copying.
Both of them first
and then you can hide the original sketch!
For these two sketches, you can use the projected curve in the curves (sketch to sketch)
and it will directly help you create a projected curve❗️
Is this projected curve the same as the V1 (intersection curve)?❓
The result is the same❗️ (The trajectory is Same)
So I can use two different methods to get the same result⭕️
After you know these two methods☑️
,you can consider which method can solve your problem
when you operate it in the future 🗯️
Sometimes it may be better to use intersecting curve,
sometimes it may be better to use projected curve,
or if you prefer to use a certain method, just learn that one!
Thank you for watching.
If you like our video, please like and click on the button below to subscribe!
See you in the next video.
