Pruning My Root Over Temple Ficus benjamina, The Bonsai Zone, March 2024

Eisei-en Bonsai
37 followers
Hi everyone, Nigel Saunders here. It is a beautiful sunny day today. It's very tropical here in the
greenhouse. So today I thought I'd work on a tropical tree and today I'm going to be pruning
my Ficus benjamina root over temple planting. Here is a look at the tree. So this is a medium
leaf size Ficus benjamina. It was a cutting that I planted over this temple long long ago.
Last year I repotted it into this pot that Sophie made for me and I mentioned that the pot is a
little large for the tree at the moment but I'm hoping you know to grow the canopy out
and eventually get everything into proportion. This is the first time my Ficus benjamina has
seen sunlight since last fall. So it grew quite well over the winter. I noticed there's a little
bit of scale insects on it so I'll have to give it a spray after I'm done pruning it today.
So I'm going to begin the pruning now and I'm wondering if I should use the blue scissors to
establish my umbrella-shaped canopy first. I think that would be a good idea. The pruning
with the blue scissors will be a profile prune to get that umbrella-shaped canopy
and then after that's done I'll go in and do a more detailed pruning eliminating branches
that aren't growing in good spots and doing a general detailed prune. So here I go with the
profile prune. So the first thing I need to do is kind of establish what height I want my umbrella
canopy and I would say somewhere about here. So I'll come in and just make it a flat top
at that height cutting through everything. So you can see that's about the height of my umbrella
canopy and then I want to round it. So I'll come in and start rounding the umbrella shape
and you have to do this from all you know all dimensions. So you can see it's a little heavy
at the back here and it's kind of a brutal operation. You're just cutting through everything
leaves, thick branches, thin branches but it gets the basic shape established which
is always important with a ficus to get that nice umbrella-shaped canopy formed.
So I would say I'm pretty close now. I think that's a good umbrella shape not much sticking
out somewhere there. So I'm happy with that maybe yeah I think that looks quite good.
That is step one of the pruning completed and if you just pruned your ficus you know pruning
an umbrella-shaped canopy all the time you would get a fairly good looking tree in the end. However
it's always good to go in and sort out the branch structure making sure all your branches are
dividing from one to two making sure you're cleaning out all the new growth that's formed
on the trunks doing a general cleanup to get air and light into your branch structure.
My next step is to come in and do the detail pruning. So I need to look at each branch.
So on this branch you can see it's kind of a horizontal branch and there's a shoot growing
vertical here that I can take out. That gives a little more space between the branches for
air flow and light and then I'm looking at this branch and you're looking at the front view of
the tree and this one's kind of like crossing the trunk line and I have another kind of bar branch
beside it. So I think you know pruning this one away and keeping the one out here
would improve the design of the tree. So I'm going to prune this one off and keep my other one
like that. You can see how that opens up the trunk of the tree. There's a shoot in here a little
sucker that's grown. I'll take that out. There's another little one here. I don't want multiple
branches growing out from one spot on the trunk and then everything else is looking quite good
on this branch. I do have a little vertical growth here that I'll prune the tip off just to
keep it in check so it doesn't grow up really tall. Here I've got a branch growing above another
so I'll take the upper one off keeping my more of a cascading branch and on this branch in here
I have an upper branch and a lower one and they're you know one above the other so I'm going to keep
my lower one and prune off the upper branch like that. So that's got that branch all cleaned up.
It's looking quite good. The next branch I'm looking at is this one here this horizontal
branch and I noticed that there's a couple of new shoots that have grown in at the base of this
branch and I have to decide well do I want that? I don't think so. I mean it'll just cause swelling
here if I let them grow and I already have a powerful branch here so I'm going to remove these
ones like that cleaning up that structure so that looks better and then on this branch you can see
it comes up I have like an upright trunk here and then I have another one beside it and I'm wondering
if I need that one beside it or not. It has a lot of foliage attached to it.
It's kind of an awkward looking structure so I've got to sit down and look at it and decide
what I want to do in this area. You can see the branch structure there. Do I want to prune this
off keeping a horizontal branch and an upright one here? Yeah so I've got to decide what to do
in that area. I've been looking at the tree and it's a very difficult decision like this branch
or trunk line comes out and it divides into two which is fine and then it comes up and I've got
you know a vertical part to this one which has a lot of foliage on it and if I were just to
cut this off there's two possibilities. One I'd have this huge hole in the canopy
which you know if there's a replacement strategy in place you can fill that hole in again.
The other problem is that well maybe it would look too contrived that you know unnatural if
I prune this trunk off I'd have like a branch here trunk line I don't want it to look too
unnatural to the tree. So that's always a possibility is that you know with pruning
that you make the tree look too structured and on a ficus you know in nature they don't really
have a formal structure to them. So I've been thinking about it a lot
and I think if I took that off I just think it would create a worse tree.
There is a like a branch in here that could maybe come off a little one another one here
that's got to get cleaned out it's really making that structure obvious now. So the
other possibility is I can prune off some of this upper growth here which might be a good
compromise keeping my one that's fanning outwards and the one that shoots straight up I could prune
away. I'm going to prune away this one vertical one here there's an old leaf I can take off there
old leaf here just kind of cleaning up the structure a bit so I can see it better.
This branch coming out the front is really nice I like that one I'll clean up the one going towards
the inside here there's one here pointing to the inside of the tree I want all my branches
fanning outwards yeah and then there's that vertical section there's another where this
branch comes you can see it divides there's this one a vertical part and then one that kind of
comes back on the inside of the tree. I don't see a future in that branch so I'm going to take that
one off so just make sure there's nothing attached to it now there's a branch back there I'll rough
prune it for starters take that out that looks better and then maybe that vertical one I can
reduce back to a shoot that fans outwards there's one here so I'll take the top off at least
just the top of that branch there's one on the inside here I can remove there's one on the inside
here I can take out just kind of cleaning up all this growth that's going back into the tree
there's another one here another one here that's got that structure better
yeah so there's a look at it now it's definitely improved I think I could take off that vertical
part here and keep this part of this of the branch I think that would improve it
it would solve a lot of my problems for the future so here I go I'm taking that vertical
branch right off like that so there wasn't a whole lot of foliage attached to it the canopy
still looks good so that's that's good yeah I think that really improves it now this vertical
one there's one coming forward which is really nice because I didn't have a lot of foliage coming
forward on this tree it was kind of back heavy so behind that is a branch that goes quite vertical
so I'm going to prune off this one that's crossing back to the interior of the tree
I'm going to clean up some of this yeah sucker growth one branch back a bit
so that branch is getting light now which is good it was kind of shaded out before
so I've got a lot of this side of the tree sorted out but now I'm looking at this side
and there's a lot going on here there's multiple branches growing from one spot here
there's like one two three four branches growing all from one spot so I think I've got to clean
that out a bit otherwise you know I'm going to get a big ball shape here it'll thicken up and
get quite ugly in the future so this branch here is really nice the only unfortunate thing is it
starts it starts kind of at the back and then this part of it comes forward it's not a very
flowing branch from the trunk which is too bad so I've got to decide you know out of all these
multiple trunks which one I'm going to keep here's a look at that area you can see in here
all these multiple trunks coming from one spot so I need to do some thinning in that area
which is going to quite dramatically change this upper canopy it's really going to thin
it out and maybe not in a good way but yeah so I've got to pick my best flowing branches
it's always a good decision to pick your flowing branches so I'm checking the tree out
looking at the front tough decisions tough decisions there's a dead stub here I'll take out
so this branch is kind of weak and it kind of grows back in towards the center of the tree
I think that's one I could clean out even though it's coming forward and kind of filling the canopy
out in that area I just don't see a future for that branch it's just not a flowing branch and it
instead of flowing outwards it kind of comes in so I'm taking that off that's one branch removed
in that area so now you can see I still have three major branches here and this is going to be going
to be a very tough decision very tough this branch has a lot going for it it's got this one coming
forward it divides whereas the one behind is very straight it kind of fills in one area of the canopy
but not a highly visible area so if I was going to remove one branch from that area I think it would
be this one yeah so that one's going to come off big cut coming up all right here I go so I'm going
to come in and just prune it off flush so here I go big cut coming up it's done let's see what I
remove so not too bad does the canopy look a bit empty now maybe it does but you know it's getting
light in here and it'll fill in there's a branch here that's growing back across the center of the
tree I'll get rid of that there's a few suckers down here I can remove just cleaning up this
structure yeah it's kind of a big change for the tree but ficus are pretty good at filling in
now this branch here I've got a shoot growing on the inside I'll take out an old leaf here
an old leaf here I can take out this one out it's a little cluttered here at the tip
like that's got it cleaned up there's a branch here I think that's okay it's kind of growing a bit
near this one I'll just take part of it off just to get a little more light in there
this branch is looking good now there's a branch over here that's kind of growing
underneath another branch it's not getting a lot of light but
looks okay though I think I should keep that maybe even remove the one back here
there that gives it a good light now there's one growing in towards the tree back here I can clean
out so I think the canopy is going to look a little sparse after this pruning but you know
over the summer I'm sure it'll fill in quite a bit okay so I've solved some problems with this
tree not all the problems but some so let's look at this back branch now this one back here
so here's this back branch I'm just looking leaves falling off
um just looking for problem areas it's not too many these two branches are kind of growing
above each other I could take this vertical shoot off the vertical shoot I'll take off here
there's a branch hanging down here and I think that's okay I think you know
I need some sort of hanging branches on the tree
leaf I can take out there I'll take this vertical part off the tip of the branch
keeping it kind of fanning outwards stub back off one going towards the inside there
okay that helps this branch it's a vertical part I can take off here
thing is stub up there too on the inside I can take out here
it's looking okay there's a branch here I need to take off it's growing across that branch and
coming from you know there's a division of one to three here so I reduce that back
a little shoot I can take out there and the tip off here just to get a little more
ramification I'll prune the tip off here and yeah I think everything on this branch is looking
pretty good I can prune off a bit of this upward growth here a little flatter so now let's have a
look here here I have you can see this lower branch is interfering with the one above it
I think I need to take this upwards part off and on this branch
take the tip off here yeah there's not much I can do there this branch doesn't flow I'm going to
remove that it kind of goes 90 degrees to the branch it doesn't good flow line to hold the
leaf off there there's a few suckers in here I've got to get rid of otherwise it just makes it lumpy
there's a few suckers on the inside here I can get rid of too and what about this one
let's see I think that one can stay just pruning a few crossing branches off there ones that were
cutting back in across the canopy this one can come out too thinning the canopy getting light
to all these branches if they don't get light they do not grow okay I'm going to step back
and have a look at the tree it's not too bad I'm not this branch at the back is a little
little on the strange side but I think as this fills in you won't see it so much and then
in the future maybe I can do a little more pruning to that area
I could take this one branch off that's growing back in towards the center of the tree maybe this
one too just to clean it up a bit yeah it's a little obvious now that branch but I'm sure you
know in the future there'll be more opportunities open up for pruning kind of improving that branch
but I wouldn't want to take it away it's kind of an important trunk line but I could see in
the future maybe you know reducing it back so it's not so vertical it's a little cluttered
here I'm just cleaning it out a bit okay well I think I think that's pretty well got the tree
pruned up for today I think the next phase of this tree's life will be you know letting it
fill in again and then then I tackle the pruning again always picking my best flowing branches and
I think slowly over time I'll get a better and better branch structure to this tree
but I think you know if I took more off today I think it would weaken the tree too much and it
would start to lose its shape and I just think it's thinned out and it can grow you know nice
and healthy now I have all these branches are getting light and it's just a matter of letting
it fill in again and then tackling the pruning in the future here is the front of the tree I'll spin
it around so you can see it from all angles so this tree has really improved from you know in
the last few years it's I really like this tree you know it has a long way to go you can see
there's a dead section of the back here that or a branch died off but it's healing nicely
yes it has its faults this tree you see it's a little awkward looking in that view
but it also has its charm and I think it's slowly developing into a better and better tree
so my next step is to spray it it had some scale insects on it so I'll give it a spray
with soap and water all right here I go with my soap and water so I'll start from above
come below spray upwards rotate the tree around
this is just liquid dish soap the kind you use for hand washing dishes
mixed 40 parts water to one part dish soap approximately I don't measure it I just guess
so that is sprayed quite well just spray the temple surface of the soil
so I'll let that sit for a while and then rinse the tree off I'd let the tree sit for about
five minutes so now rinse it all off all that soap and water
some people leave the soap and water on their tree
probably for a ficus you could because they're tough trees but I don't know I always rinse it
off I'll leave my ficus benjamina root over temple planting out here in the sunshine for the
rest of the day and then towards the evening I'll bring it back into the plant room where it will
stay until maybe may so that is it for today I'm Nigel Saunders thanks for joining me in the bonsai
zone
