Ever wondered what it takes to keep your BMW X3 running smoothly? Today, we're diving into the heart of your vehicle's drive train to tackle a critical maintenance task: replacing the transfer case fluid. While this job is DIY-friendly and can be done right in your own garage, there are three major obstacles you'll need to overcome. Are you ready to get under the car and discover the rewards?
* Disclosure: As an eBay Partner and Amazon Affiliate, I may be compensated if you make a purchase from the product links I posted in video descriptions and comments.
Ever wonder what it takes to keep your BMW X3 running smoothly? Today,
we are diving into the heart of your vehicle's drivetrain to tackle a critical maintenance task:
replacing the transfer case. Though this job is DIY-friendly and can be done right in your own
garage, there are three major obstacles you will need to overcome. Are you ready to get
under the car and discover the rewards? Welcome to Professor's Garage. Thank you for stopping by. If
you found this video helpful, please leave us a like. If you are new to this channel,
consider subscribing. There's much more to come on DIY mechanic tips and tutorials in the garage.
Back to the job. I purchased this 2017 BMW X3 M Sport at over 82,000 miles recently.
It's overdue for fluid replacement on the drivetrain, so there will be a series of
videos on transfer case, rear and front differentials, and automatic transmission
fluid changes. Today, we'll focus on the transfer case fluid replacement,
and I will show you every step in this job to overcome three major challenges
for this maintenance, plus one important practical tip at the end. Let's get started.
Engage the parking brake. Raise the front of the car as well. Place a couple of jack
stands in the front for additional support. Make sure the vehicle is level when you do your fluid
check. Double-check that the car is stable and safe. The transfer case is right here,
but there is no drain plug. This is our first challenge. It does have a fill plug,
and we are going to suck transfer case fluid through it. To do this, get a fluid extractor
or syringe and make an adapter for it. Simply heat up the middle of the tube and bend it. Connect it
to the extractor tube. You are ready to "drain," so to speak. The fluid needs to be removed from the
driver's side undercover to gain better access. We need to access this side of the bracket, and
as long as we can get this off, we should be good. Yeah, that hopefully gives us enough clearance.
Now, we have another major obstacle: the bracket is in the way, and we need
to remove it first to get access to the fill plug. Before you remove the bracket,
you need something to support the transfer case. So here, I use a floor jack with a
piece of wood. Use a 16mm socket on one side and an 18mm on the other side. Once you remove it,
it's going to fall down. The bracket and the last bolt. This whole thing will come off. Okay, great.
Now we have access to the fill plug. Let's take it off. Make sure it's seated good. No
fluid coming out? Mate, let's suck the fluid out. It's dark; put a catch pan under it.
In the end, I got about 550-560 CC, so this is the transfer case fluid. Now it starts to overflow.
It's four, so that's exactly 600 ml. New fluid. Torque it to 60 Newton meters or 44 foot-pounds.
Great! Your transfer case is full of fresh fluid. Now it's time to reinstall the bracket. Something
really important here: during this job, the transfer case should be supported without the
bracket, and make sure it doesn't move. If it does, raise it back to its original place so
you can tighten the bolts. In my case, it actually moved and came down a little bit,
so I had to pump the floor jack to push it up before I could easily feed the bolts and
thread them back on. Also, never use power tools to thread the bolts or you may dig
into a bigger trouble. Now torque them to 19 Newton meters or 14 foot-pounds on the
driver's side for the 16mm bolts, and 19 Newton meters or 14 foot-pounds on the passenger side.
And this transfer case is not going anywhere. Now, before you can drive it, there is one more step,
our third challenge. The transfer case needs to relearn or calibrate with the new fluid,
or your next rides may be interesting. Yes, welcome to the BMW world. Fortunately,
my latest scanner, the King Bling K6, has that feature. So let's give it a try.
Under BMW and special reset functions, there is a transfer box calibration. This is what
we need after the replacement of the transfer case fluid. Let's redo the calibration. Wow,
lots of warnings. This is scary. It says it has been recalibrated. The new
calibration value has been stored in the VTG control unit. Continue. Continue. So
let's restart the car to see what it says. Looks like everything is back to normal.
I hope you found this video helpful and informative. If
a professor can do it crawling under the car, you can do it too. Be safe,
stay dirty. Until next time, may the Lord bless you and may His peace be with you!